PCM50US36

AC-DC 50/80/120 Watts PCM Series • • • • • • • 4000 VAC Isloation Low Leakage Current Single, Dual and Triple Outputs Worldwide Medical Approvals CCC Approved (PCM80) Both Line and Neutral Fused xppower.com Non-standard Connectors Available Specification Input Input Voltage Input Frequency Input Current • 90-264 VAC • 47-63 Hz • PCM50: 1.35 A max PCM80: 1.30 A max PCM120: 1.60 A max Inrush Current • 30 A at 115 VAC or 60 A at 230 VAC at 25 ˚C cold start Power Factor • PCM50: 0.55 typical PCM80/120: 0.94 min Earth Leakage Current • 180 µA max at 132 VAC/60Hz 300 µA max at 264 VAC/50Hz General Efficiency Isolation • Single output models: 80% typical Multi output models: 75% typical • 4000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground • PCM50: 64 kHz typical PCM80: 55 kHz typical PCM120: 120 kHz typical • 100 kHrs at full load and 25 ˚C ambient per MIL-HDBK-217F Switching Frequency MTBF Environmental Operating Temperature • PCM50: 0 ˚C to +70 ˚C, derate from 100% load at 50 ˚C to 50% load at +70 ˚C PCM80: 0 ˚C to +70 ˚C, derate from 100% load at 40 ˚C to 50% load at +70 ˚C PCM120: 0 ˚C to +60 ˚C, derate from 100% load at 40 ˚C to 50% load at +60 ˚C Storage Temperature • PCM50/80: -40 ˚C to +80 ˚C PCM120: -20 ˚C to +85 ˚C Output Output Voltage Minimum Load • See tables • No minimum load required for single output models. See tables for multi output models Start Up Delay • 2 s max Hold Up Time • 10 ms min at low line Line Regulation • ±1% max at full load for ±10% change in input Load Regulation • ±5% max Transient Response • 5% max. deviation, 500 µs recovery time for a 50% load change Ripple & Noise • 2% pk-pk, 20MHz BW Overvoltage Protection • 112-132% with auto recovery on V1 Overcurrent Protection • 110-200% with auto recovery on all outputs Temperature • ±0.05% /˚C Coefficient EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Power Frequency Magnetic Fields Dips & Interruptions • EN55022, level B conducted EN55022, level B radiated • EN61000-3-2, class A • EN61000-3-3 amendments 1 & 2 • IEC61000-4-2, level 3 Perf Criteria B • IEC61000-4-3 10 V/m, level 3 Perf Criteria B • IEC61000-4-4, level 3 Perf Criteria B • IEC61000-4-5, level 3 Perf Criteria B • IEC61000-4-6 10 V/m, level 3 Perf Criteria B • IEC61000-4-8 10 A/m, Perf Criteria B • IEC61000-4-11, 30% 500 ms, 60% 100 ms, 100 % 5000 ms Perf Criteria A, A, C • UL60601-1, CSA C22.2 No. 601.1 per cUL EN60601-1, CCC (PCM80) Safety Approvals AC-DC Models and Ratings Maximum Output Power 30 40 40 42 45 45 45 50 50 50 50 50 W W W W W W W W W W W W PCM50 Output Voltage 2.5 3.3 5.0 7.0 9.0 12.0 15.0 18.0 24.0 28.0 36.0 48.0 V V V V V V V V V V V V Output Current 12.00 8.00 8.00 6.00 5.00 3.75 3.00 2.77 2.08 1.78 1.38 1.04 A A A A A A A A A A A A Regulation(1) 7% 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% Model Number PCM50US2V5† PCM50US3V3† PCM50US05†* PCM50US07† PCM50US09†* PCM50US12†* PCM50US15†* PCM50US18†* PCM50US24†* PCM50US28†* PCM50US36† PCM50US48†* Output Power 26.5 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 42.0 W W W W W W W W W W W W W W W W W W Vnom +3.3 +3.3 +5.0 +5.0 +5.0 +5.0 +5.0 +12.0 +15.0 +5.1 +10.5 +3.3 +3.3 +5.0 +5.0 +5.0 +5.0 +5.0 V V V V V V V V V V V V V V V V V V Output 1 Imin Imax 1.0 0.5 0.2 0.5 0.5 0.5 0.5 0.5 0.5 0.0 0.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 A A A A A A A A A A A A A A A A A A 5.0 5.0 5.0 5.0 5.0 5.0 5.0 3.0 2.0 5.0 2.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 A A A A A A A A A A A A A A A A A A Tol.(1) 7% 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 7% 7% 5% 5% 5% 5% 5% Vnom +5.0 +12.0 -5.0 +12.0 +15.0 +24.0 -24.0 -12.0 -15.0 +7.2 -10.5 +12.0 +12.0 +12.0 +12.0 +15.0 +24.0 +24.0 V V V V V V V V V V V V V V V V V V Output 2 Imin(4, 5) Imax 0.4 0.2 0.2 0.2 0.2 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 A A A A A A A A A A A A A A A A A A 2.0 2.0 2.0 2.0 1.5 1.0 1.0 1.0 1.0 2.6 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 A A A A A A A A A A A A A A A A A A Tol.(1) 5% 5% 5% 5% 6% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 6% 5% 5% Vnom Output 3 Imin Imax Tol.(1) Model Number PCM50UD00† PCM50UD01 PCM50UD02† PCM50UD03 PCM50UD04 PCM50UD05 PCM50UD06† PCM50UD07† PCM50UD08† PCM50UD10 PCM50UD11 PCM50UT01† PCM50UT02† PCM50UT03† PCM50UT04†* PCM50UT05†* PCM50UT06† PCM50UT07† -5.0 -12.0 -5.0 -12.0 -15.0 -12.0 -24.0 V V V V V V V 0.0 0.0 0.0 0.0 0.0 0.0 0.0 A A A A A A A 0.8 0.8 0.8 0.8 0.8 0.8 0.5 A A A A A A A 5% 5% 5% 5% 5% 5% 5% Notes 1. Regulation includes initial set tolerance, line regulation and load regulation. † Available from Farnell InOne. See pages 236-237 *Available from Newark InOne. See page 238 Mechanical Details All dimensions are in inches (mm) Weight: 0.88-1.21 lb (400-550 g) approx. Tolerance: 0.04 (1.0) maximum 1.69 (43.0) 5.75 (146.0) Pin 1 2 3 4 5 PIN CONNECTIONS Single Dual Common Common Common Common Output Output 1 Common Common Output Output 2 Triple Common Common Output 1 Output 3 Output 2 2.99 (76.0) AC INPUT IEC 320 INLET POWER LED Notes: 1. Cable length is 48.0” (1.22m) approx. 2. For mating connector, use standard 5 pin din 180˚ socket. 3. Optional output connectors available, contact sales office. 4. Multi output models include a ferrite bead on the output connector. 3 5 2 1 DC OUTPUT 5 PIN PLUG 4 AC-DC Models and Ratings Output Power 50.0 65.0 70.0 75.0 75.0 80.0 80.0 80.0 80.0 80.0 80.0 80.0 80.0 80.0 80.0 80.0 38.0 53.0 60.0 60.0 60.0 60.0 65.0 65.0 65.0 51.0 60.0 60.0 65.0 60.0 65.0 W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W PCM80 Tol.(1) 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Vnom 3.3 5.0 7.0 9.0 10.0 12.0 13.5 15.0 16.0 17.5 18.0 24.0 27.0 30.0 36.0 48.0 3.3 3.3 5.0 5.0 5.0 5.0 12.0 15.0 24.0 3.3 5.0 5.0 5.0 5.0 5.0 V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V Output 1 Imin Imax 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 15.1 13.0 10.0 8.3 7.5 6.7 5.9 5.3 5.0 4.6 4.4 3.3 3.0 2.7 2.2 1.7 7.0 7.0 7.0 7.0 7.0 7.0 5.0 4.0 2.1 7.0 6.0 6.0 6.0 6.0 7.0 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A Vnom Output 2 Imin(4, 5) Imax Tol.(1) Vnom Output 3 Imin Imax Tol.(1) Model Number PCM80PS3V3† PCM80PS05†* PCM80PS07† PCM80PS09†* PCM80PS10 PCM80PS12†* PCM80PS13V5† PCM80PS15†* PCM80PS16 PCM80PS17V5 PCM80PS18†* PCM80PS24†* PCM80PS27†* PCM80PS30 PCM80PS36 PCM80PS48†* PCM80PD00 PCM80PD01 PCM80PD02 PCM80PD03 PCM80PD04 PCM80PD05 PCM80PD06 PCM80PD07 PCM80PD08 PCM80PT01† PCM80PT03† PCM80PT04†* PCM80PT05†* PCM80PT06 PCM80PT07 5.0 12.0 12.0 15.0 24.0 -24.0 -12.0 -15.0 -24.0 12.0 12.0 12.0 15.0 24.0 24.0 V V V V V V V V V V V V V V V 0.3 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.1 0.2 A A A A A A A A A A A A A A A 3.0 2.5 2.5 2.0 2.0 2.0 0.8 0.8 0.8 2.0 2.5 2.1 2.1 1.2 2.0 A A A A A A A A A A A A A A A 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% -5.0 -5.0 -12.0 -15.0 -12.0 -24.0 V V V V V V 0.1 0.1 0.1 0.1 0.1 0.1 A A A A A A 0.8 0.5 0.5 0.5 0.5 0.5 A A A A A A 5% 5% 5% 5% 5% 5% Notes 1. Regulation includes initial set tolerance, line regulation and load regulation. † Available from Farnell InOne. See pages 236-237 *Available from Newark InOne. See page 238 Mechanical Details All dimensions are in inches (mm) Weight: 1.76-1.98 lb (800-900 g) approx. 1.97 (50.0) Tolerance: 0.04 (1.0) maximum 6.63 (168.4) 3.07 (78.0) Pin 1 2 3 4 5 6 7 8 Shell PIN CONNECTIONS Single Dual Common Common Common Output 2 Output 1 Output 1 Common Output 2 Output 1 Output 1 Common Common Output 1 Output 1 Output 1 Common Ground Ground Triple Common Output 3 Output 1 Output 2 Output 2 Common Output 1 Output 3 Ground AC INPUT IEC 320 INLET 6 1 4 2 DC OUTPUT 8 PIN DIN PLUG 5 8 7 3 POWER LED Notes: 1. Cable length is 48.0” (1.22m) approx. 2. Optional output connectors available, contact sales office. 3. Multi output models include a ferrite bead on the output connector. AC-DC Models and Ratings Maximum Output Power 108 W 113 W 120 W 120 W 120 W PCM120 Output Voltage 12.0 V 15.0 V 18.0 V 24.0 V 48.0 V Output Current 9.00 A 7.50 A 6.50 A 5.00 A 2.50 A Peak Current(1) 15.00 A 10.00 A 9.00 A 7.00 A 4.00 A Model Number PCM120PS12†* PCM120PS15†* PCM120PS18†* PCM120PS24†* PCM120PS48†* Notes 1. Peak current is 5 seconds maximum duration with a 10% duty cycle. † Available from Farnell InOne. See pages 236-237 *Available from Newark InOne. See page 238 Mechanical Details All dimensions are in inches (mm) Weight: 1.90 lb (860 g) approx. Tolerance: 0.04 (1.0) maximum 7.08 (180.0) POWER LED 3.74 (95.0) 1.85 (47.0) AC INPUT IEC 320 INLET 6 1 4 2 DC OUTPUT 8 PIN PLUG Notes: 1. Cable length is 72.0” (1.83m) approx. 2. Optional output connectors available, contact sales office. 8 7 3 5 Pin 1 2 3 4 5 6 7 8 PIN CONNECTIONS All models Return Return Output +V Return Output +V Return Output +V Output +V Derating Curve 100 Load (%) 50 0 10 20 30 40 50 60 Ambient Temperature (˚C) 19-May-06