RDC40110S3V3

RDC40 Series DC-DC Power Supplies XP Power 40 Watts • 72 & 110 VDC Input for Railway Applications • Single and Dual Outputs • 1500 VAC Basic Isolation • High Efficiency - Up to 90% • Remote On/Off • Complies with EN50155 • EN50121-3-2 EMC for Railway Applications • 3 Year Warranty Dimensions: The RDC40 series of 40W DC-DC converters are designed for railway applications and comply with EN50121-3-2, the EMC standard for rolling stock apparatus. There are two input voltage ranges. The 72 VDC nominal models accept an input from 36 to 140 VDC and the 110 V nominal versions have a 55 to 176 VDC input. A trim pin allows a +/-10% adjustment for single output models. Using convection cooling the converters have a wide operating temperature range of -40°C to +85°C and a maximum case temperature of 105°C. RDC40: 2.00 x 1.60 x 0.4” (50.8 x 40.6 x 10.16 mm) Models & Ratings Input Voltage Output Voltage 36-140 VDC 55-176 VDC Output Current 3.3 V 5.0 V 12.0 V 15.0 V ±12.0 V ±15.0 V 3.3 V 5.0 V 12.0 V 15.0 V ±12.0 V ±15.0 V 10.00 8.00 3.35 2.65 ±1.65 ±1.35 10.00 8.00 3.35 2.65 ±1.65 ±1.35 A A A A A A A A A A A A Input Current(1) No Load Full Load 30 mA 526.82 mA 30 mA 617.28 mA 25 mA 641.76 mA 25 mA 627.37 mA 30 mA 632.18 mA 30 mA 639.20 mA 20 mA 344.83 mA 25 mA 408.58 mA 25 mA 420.06 mA 25 mA 410.64 mA 20 mA 413.79 mA 20 mA 420.78 mA Maximum Capacitive Load 25000 2000 2500 2500 ±1600 ±1600 25000 2000 2500 2500 ±1600 ±1600 μF μF μF μF μF μF μF μF μF μF μF μF Efficiency 87.0% 90.0% 87.0% 88.0% 87.0% 88.0% 87.0% 89.0% 87.0% 88.0% 87.0% 87.5% Model Number(2) RDC4072S3V3 RDC4072S05 RDC4072S12 RDC4072S15 RDC4072D12 RDC4072D15 RDC40110S3V3 RDC40110S05 RDC40110S12 RDC40110S15 RDC40110D12 RDC40110D15 Notes 1. Input current specified at nominal 72 V or 110 V input. 2. Add suffix ‘-HK’ for optional heatsink. Input Characteristic Input Voltage - Operating Minimum Typical 36 55 Maximum Units Notes & Conditions 140 176 VDC 72 V nominal 110 V nominal Input Current See models and ratings table Input Reflected Ripple 20 mA Input Filter Undervoltage Lockout Input Surge Through 12 μH inductor and 33 μF capacitor Pi network OFF: 30.5 OFF: 48.5 ON: 33.5 V ON: 52.5 V V 150 185 VDC www.xppower.com 72 V models 110 V models 72 V models (for 100 ms) 110 V models (for 100 ms) RDC40 Series DC-DC Power Supplies XP Power Output Characteristic Min. Typ. Max. Units Notes & Conditions VDC See Models and Ratings table % On single outputs models only Output Voltage Output Voltage Trim Minimum Load ±10 0 A Line Regulation ±0.2 % Load Regulation ±0.5 ±1.0 % Single output models Dual output models (balanced outputs) % Dual output models, when one load is varied between 25% and 100% and the other is fixed at 100% Cross Regulation ±5 Setpoint Accuracy ±1 % Start Up Time 30 ms Single output models Dual output model Measured with 20 MHz bandwidth in parallel with 1 μF ceramic capacitor across output rails 100 150 mV pk-pk mV pk-pk 4 % Deviation, recovery to within 1% in 3.0) or Open Off = Logic Low (