SHP350 Series
•
420 W High Line Output Power
•
Rugged Industrial Construction
•
Variable Speed Fan for Noise Reduction
•
-40 °C to +70 °C Operation
•
5 V Standby
•
AC OK, Remote On/Off and Active Current Share
•
Screw Terminals
•
SEMI F47 Compliant
•
3 Year Warranty
The SHP350 AC-DC power supply provides upto 420 W of output power in a compact rugged mechanical package, suitable for a
range of industrial applications.
The unit comprises of a main output with voltages from 12-48 VDC and a 5 VDC standby supply which can be utilitsed with the
signals and control features of the unit to provide detection of loss of AC input and remote on/off control.
Multiple units can be used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage
current, and conducted EMC compliance to Class B also simplify higher power system design.
Packaged in a compact 7” (178 mm) x 3.6” (91 mm) x 2.1” (53 mm) and carrying IEC60950 family safety approvals, the SHP350 has
a load dependant variable speed fan, is fully protected with overtemperature shutdown and provides -40 ºC start up and full power
from -20 ºC to 50 ºC and 50% power at +70 ºC.
xppower.com
Models and Ratings
Output Voltage V1
Output Current V1
12 V
15 V
24 V
28 V
36 V
48 V
Standby Supply V2
26.5 A
22.0 A
14.5 A
12.5 A
9.7 A
7.3 A
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
Output Power
Continuous
A
A
A
A
A
A
Peak
Model Number
318 W
330 W
348 W
350 W
350 W
350 W
417 W
420 W
420 W
420 W
SHP350PS12
SHP350PS15
SHP350PS24
SHP350PS28
SHP350PS36
SHP350PS48
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Minimum
85
47
Typical
115/230
50/60
Units
VAC
Hz
0.15
A
3.8/2.1
A
115/230 VAC
A
µA
230 VAC cold start, 25 ºC
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
60
150/260
500
T10 A/250 V internal fuse in both lines
Input Derating Curve
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
EN61000-3-2 class A compliant,
Class C compliant ≥10% load
>0.9
Power Factor
Input Current - No Load
Input Current - Full Load
(350 W)
Inrush Current
Earth Leakage Current
Input Protection
Maximum
264
63
100
Figure 1
Output Power (%)
90
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
Minimum
12
Typical
Maximum
48
±1 (V1) , ±5 (V2)
±10
±0.2
±0.5
±1 (V1) , ±5 (V2)
Units
VDC
%
%
A
s
ms
%
%
%
4
%
145
140
% pk-pk
%
% I nom
0
0.5
20
Transient Response - V1
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
1%
115
110
0.02
%/˚C
°C
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
V1 only. See mechanical details.
230 VAC full load
After 20 min warm up
90-264 VAC
0-100% load.
Recovery within 1% in less than 500 µs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
Output Voltage (V)
14
12
10
8
6
4
Unit enters
hiccup mode
2
0
0
5
10
15
20
25
30
35
Output Current (A)
Figure 2
Typical V1 Overload Characteristic (SHP350PS12 shown)
3
xppower.com
General
Specifications
Xxxxxxxxxx
Characteristic
Efficiency
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
Minimum
Typical
85
Maximum
3000
1500
500
70/200/130
6.6
Mean Time Between Failure
Weight
Units
%
VAC
VAC
VDC
kHz
W/in3
Notes & Conditions
See fig 3 & 4
PFC converter / Main converter / Standby
216
kHrs
MIL-HDBK-217F at 25 ºC GB
2.1 (940)
lb (g)
See mechanical details
Efficiency vs Load
SHP350PS12
Figure 3
90%
80%
70%
Efficiency
60%
50%
115Vac input
40%
30%
230Vac input
20%
10%
0%
10
20
30
40
50
60
70
80
90
100
Load (%)
SHP350PS48
Figure 4
90%
80%
70%
Efficiency
60%
50%
115Vac input
40%
30%
230Vac input
20%
10%
0%
10
20
30
40
50
60
70
80
90
100
Load (%)
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
4
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
Current Share
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Standby Supply V2
Isolated 5 V/0.2 A supply, always present when AC supplied.
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
5 V Standby
Pin 9
Max 12 V 20 mA
330R
AC OK Collector
Pin 3
Transistor On (4.5 V): AC OK
AC OK Emitter
Pin 2 (-sense)
5 V Standby
Return Pin 10
J2 Logic Connector
Remote On/Off (Inhibit)
INHIBIT HI
INHIBIT LOW
Figure 6
800 R
POWER SUPPLY
800 R
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
Inhibit Hi
Pin 7
On (4.5 V):
100 R
Inhibit Hi
Pin 7
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Signal
POWER SUPPLY
Chassis J3 Logic Connector
High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
SHP350PSXX (1)
V1 Output
ns
e
V1 Output
-
Current
Share
s
en
-S
e
se
en
-S
Figure 7
Se
+
+ Sens
+
-
+
e
Se
ns
e
Current
Share
+
+
- Sense
-
SHP350PSXX (3)
SHP350PSXX (2)
V1 Output
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply 1
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J3 Connector
Power Supply 2
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J3 Connector
Power Supply 3
AC OK
Collector
Pin 3
Transistor On (4.5 V): AC OK
AC OK Emitter
Pin 2
J3 Connector
Parallel Remote Inhibit Connection
PSU 1
Figure 9
6
PSU 8
PSU 2
Pin 7
Pin 7
Pin 7
Pin 8
Pin 8
Pin 8
Please see figure 6.
xppower.com
Environmental
Characteristic
Minimum
Typical
Maximum
Units
Operating Temperature
-40
+70
°C
Storage Temperature
-40
+85
°C
See derating curve, fig 10.
Cooling
5
Humidity
Operating Altitude
95
3000
Notes & Conditions
%RH
m
Integral variable speed fan load dependant.
See fig 11.
Non-condensing
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis,
total 18 shocks. EN60068-2-27 &
EN60068-2-47.
Single axis 10-500 Hz at 2 g x 10 sweeps.
EN60068-2-6.
Shock
Vibration
Temperature Derating Curve
Figure 10
Some specification
parameters may not be met
Output Load (%)
100
50
0
-40
-20
0
+50
+70
Ambient Temperature (ºC)
Fan Speed Control
100
Fan Speed (%)
Figure 11
0
0
10
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Low Voltage PSU EMC
Harmonic Current
ESD
Radiated
EFT
Surges
Conducted
Dips and Interruptions
Standard
EN61204-3
EN61000-3-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
SEMI F47
Test Level
High severity level
Class A
3
3
3
Installation class 3
3
Dip: 20% 5000 ms
Dip: 30% 500 ms
Dip: 60% 200 ms
Dip: 100% 5000 ms
Criteria
as below
Notes & Conditions
A
A
A
A
A
A
A
B
B
Compliant
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Test Level
Standard
EN55032
EN55032
EN61000-3-3
Conducted
Radiated
Voltage Fluctuations
Notes & Conditions
Criteria
Class B
Class A
Safety Agency Approvals
Safety Agency
CB Report
UL
TUV
CE
Safety Standard
IEC60950-1:2005 Ed 2 / IEC62368-1:2014
UL 62368-1 & CAN/CSA C22.2 No. 62368-1-14
EN62368-1:2014/A11:2017
LVD
Equipment Protection Class
Safety Standard
Notes & Conditions
IEC60950-1:2005 Ed 2 / IEC62368-1:2014
See safety agency conditions of acceptibility
for details
Class I
Category
Information Technology
Information Technology
Information Technology
Mechanical Details
Standard Terminal Block
M4 Screw 4 Pins
0.37 (9.5) Centre
Standard Terminal Block
M3.5 Screw 3 Pins
0.37 (9.5) Centre
2.1 (53.34)
L
-VOUT
N
+VOUT
LED
2.20
(55.9)
B
1.13
(28.72)
VR
1.03 (26.2)
0.06 (1.5)
7.00 (177.8)
A Mounting Hole
8 places M3 x 0.5
0.15 (3.8) Max. Penetration
PIN 2
PIN 1
PIN 10
PIN 9
A
A
AIRFLOW
1.61
(41.0) -2X
DETAIL B
SCALE 2 : 1
LOGIC CONNECTOR J3
A
A
2.44
(62.0)
CL
A
A
5.35 (136.0)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 1.73 lb (0.788 kg).
8
3.6
(91.44)
0.70 (17.9)
J3 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby
10
5 V Standby Return
3. Logic connector J3 mates with JST housing PHDR-10VS
and SPHD-001T-P0.5 Crimp Terminals
18 Feb 20
SHP650 Series
•
Rugged Industrial Construction
•
End Fan, Top Fan & U’
‘ Channel Mechanical Options
•
-40 °C to +70 °C Operation
•
5 V Standby
•
AC OK, Remote On/Off and Active Current Share
•
Load Dependant Variable Fan Speed
•
Screw Terminals
•
SEMI F47 Compliant
•
3 Year Warranty
The SHP650 AC-DC power supply provides upto 650 W of output power in three mechanical packages to provide installation
flexibility in a range of industrial applications.
The unit comprises of a main output with voltages from 12-48 VDC and two peripheral outputs providing a 12 VDC fan supply and a
5 VDC standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of AC input
and remote on/off control.
Multiple units can used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage current,
and conducted EMC compliance to Class B also simplify higher power system design.
Packaged in a compact 8” (203 mm) x 4” (102 mm) x 2.6” (65 mm) and carrying IEC60950 family safety approvals, the SHP650 has a
load dependant variable speed fan is fully protected with overtemperature shutdown and provides full power from -20 ºC to 50 ºC and
50% power at +70 ºC.
xppower.com
Models and Ratings
End Fan Models (-EF)
Output Voltage V1
12 V
15 V
24 V
28 V
36 V
48 V
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Fan Supply V2
Not
Not
Not
Not
Not
Not
Standby Supply V3
Available
Available
Available
Available
Available
Available
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
Max Output Power
Model Number
607 W
607 W
657 W
651 W
657 W
657 W
SHP650PS12-EF
SHP650PS15-EF
SHP650PS24-EF
SHP650PS28-EF
SHP650PS36-EF
SHP650PS48-EF
A
A
A
A
A
A
Top Fan Models (-TF)
Output Voltage V1
12 V
15 V
24 V
28 V
36 V
48 V
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Fan Supply V2
Not
Not
Not
Not
Not
Not
Standby Supply V3
Available
Available
Available
Available
Available
Available
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
Max Output Power
Model Number
607 W
607 W
657 W
651 W
657 W
657 W
SHP650PS12-TF
SHP650PS15-TF
SHP650PS24-TF
SHP650PS28-TF
SHP650PS36-TF
SHP650PS48-TF
Max Output Power(1)
Model Number
601 W
601 W
651 W
655 W
651 W
651 W
SHP650PS12
SHP650PS15
SHP650PS24
SHP650PS28
SHP650PS36
SHP650PS48
A
A
A
A
A
A
U Channel Models
Output Voltage V1
12 V
15 V
24 V
28 V
36 V
48 V
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Fan Supply V2
12 V
12 V
12 V
12 V
12 V
12 V
/
/
/
/
/
/
0.5
0.5
0.5
0.5
0.5
0.5
Standby Supply V3
A
A
A
A
A
A
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
A
A
A
A
A
A
1. U Channel models require a minimum of 5.5 m/s airflow from the system for cooling
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Minimum
85
47
Typical
115/230
50/60
Units
VAC
Hz
40
0.75
A
A
A
mA
>0.9
Power Factor
Input Current - No Load
Input Current - Full Load
Inrush Current
Earth Leakage Current
Input Protection
Maximum
264
63
0.15/0.3
6.5/3.2
0.3/0.5
T16 A / 250 V internal in-line fuse
Input Derating Curve
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
Agency approval, 47-63 Hz
EN61000-3-2 class A compliant
EN61000-3-2 class C for loads ≥10%
115/230 VAC
115/230 VAC
230 VAC cold start, 25 ºC
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
100
Figure 1
Output Power (%)
90
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
Minimum
12
Typical
±0.2
±0.5
±1 (V1) , ±5 (V3)
Units
VDC
%
%
A
s
ms
%
%
%
4
%
1
140
145
% pk-pk
%
% I nom
0.02
%/˚C
°C
0
0.5
20
Transient Response - V1
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
Maximum
48
±1 (V1) , ±5 (V3)
±10
115
110
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
V1 only. See mechanical details.
230 VAC full load
After 20 min warm up
90-264 VAC
0-100% load.
Recovery within 1% in less than 500 µs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
Unit enters
hiccup mode
Figure 2
Typical V1 Overload Characteristic (SHP650PS12 shown)
3
xppower.com
General
Specifications
Xxxxxxxxxx
Characteristic
Efficiency
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
Minimum
Typical
84
Maximum
3000
1500
500
70/200
8.2
Mean Time Between Failure
260
Weight
Units
%
VAC
VAC
VDC
kHz
W/in3
kHrs
2.8 (1.25)
lb (kg)
Notes & Conditions
See fig 3 & 4
PFC converter / Main converter
MIL-HDBK-217F at 25 ºC GB
See mechanical details
Efficiency vs Load
SHP650PS12
Figure 3
SHP650PS48
Figure 4
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
4
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
Current Share
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Standby Supply V3
Isolated 5 V/0.2 A supply, always present when AC supplied.
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
5 V Standby
Pin 9
Max 12 V 20 mA
330R
AC OK Collector
Pin 3
Transistor On (4.5 V):
AC OK
AC OK Emitter
Pin 2 (-sense)
5 V Standby
Return Pin 10
J3 Logic Connector
Remote On/Off (Inhibit)
Figure 6
INHIBIT HI
INHIBIT LOW
800 R
POWER SUPPLY
800 R
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
Inhibit Hi
Pin 7
POWER SUPPLY
100 R
Inhibit Hi
Pin 7
4.5 V):
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Signal
Chassis J3 Logic Connector
High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
SHP650PSXX (2)
V1 Output
V1 Output
Current
Share
Figure 7
se
en
-S
ns
e
e
Se
+
+ Sens
+
-
V1 Output
-
Current
Share
-S
s
en
+
e
+
+
- Sense
-
SHP650PSXX (3)
Se
ns
e
SHP650PSXX (1)
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply 1
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J3 Connector
Power Supply 2
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J3 Connector
Power Supply 3
AC OK
Collector
Pin 3
Transistor On (4.5 V): AC OK
AC OK Emitter
Pin 2
J3 Connector
Parallel Remote Inhibit Connection
PSU 1
Figure 9
6
PSU 8
PSU 2
Pin 7
Pin 7
Pin 7
Pin 8
Pin 8
Pin 8
Please see figure 6.
xppower.com
Environmental
Characteristic
Minimum
Typical
Maximum
Units
Notes & Conditions
Operating Temperature
-40
+70
°C
See derating curve, fig 10.
Storage Temperature
-40
+85
°C
Some specification parameters maybe
exceeded until after 20 minutes warm up
period.
Cooling
Humidity
Operating Altitude
5
95
3000
%RH
m
Integral variable speed fan load dependant.
See fig 11.
Non-condensing
Shock
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis,
total 18 shocks.
Vibration
Single axis 10-500 Hz at 2 g x 10 sweeps
Temperature Derating Curve
Figure 10
Some specification
parameters may not be met
Output Load (%)
100
50
0
-40
-20
0
+50
+70
Ambient Temperature (ºC)
Fan Speed Control
Figure 11
Fan Speed (%)
100
50
0
0
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Low Voltage PSU EMC
Standard
EN61204-3
Harmonic Current
EN61000-3-2
ESD
Radiated
EFT
Surges
Conducted
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Dips and Interruptions
EN61000-4-11
SEMI F47
Test Level
High severity level
Class A
Class C
3
3
3
Installation class 3
3
Dip:
30% 10 ms
Dip:
60% 100 ms
Dip: 100% 5000 ms
Criteria
as below
Notes & Conditions
For loads ≥10%
A
A
A
A
A
A
B
B
Compliant
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Test Level
Standard
EN55032
EN55032
EN61000-3-3
Conducted
Radiated
Voltage Fluctuations
Notes & Conditions
Criteria
Class B
Class A
Safety Agency Approvals
Safety Agency
CB Report
UL
TUV
CE
Safety Standard
IEC60950-1:2005 Ed 2 / IEC62368-1:2014
UL 62368-1 & CAN/CSA C22.2 No. 62368-1-14
EN62368-1:2014/A11:2017
LVD
Equipment Protection Class
Safety Standard
Notes & Conditions
IEC60950-1:2005 Ed 2 / IEC62368-1:2014
See safety agency conditions of acceptibility
for details
Class I
Category
Information Technology
Information Technology
Information Technology
Mechanical Details - End Fan (Suffix -EF)
Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Vo+
L
E
N
Vo-
Standard Terminal
Block, M3.5 Screw 3
Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
2.49
(63.3)
V1 Adjustment
Output On, LED
9.18 (233.2)
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
2.50 (63.5)
AIRFLOW
Pin 2
Pin 1
Pin 10
Pin 9
1.95
(49.5)
J3: Logic Connector
8.00 (203.2)
2.86 (72.6)
4.00
(101.6)
CL
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.8 lb (1.25 kg).
8
6.53 (165.8)
0.87
(22.2)
J3 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby (V3)
10
5 V Standby Return (V3)
3. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
xppower.com
Xxxxxxxxxx Details - Top Fan (Suffix -TF)
Mechanical
Standard Terminal Block, M3.5 Screw 3, Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Vo+
L
E
Vo-
N
V1 Adjustment
Output On, LED
2.50 (63.5)
8.00 (203.2)
2.58 (65.5)
AIRFLOW
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
1.95
(49.5)
Pin 2
Pin 1
Pin 10
pin 9
J3: Logic Connector
2.86 (72.6)
4.00
(101.6)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Pin
1
2
3
4
5
6
7
8
9
10
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.6 lb (1.2 kg).
0.87
(22.2)
6.53 (165.8)
J3 Logic Connector
(JST B10B-PHDSS)
Function
+ Sense
- Sense
AC OK/Power Fail
- Sense
Current Share
Current Share
+ Inhibit
- Inhibit
+5 V Standby (V3)
5 V Standby Return (V3)
3. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
9
xppower.com
Xxxxxxxxxx Details - U Channel (No Suffix)
Mechanical
Standard Terminal Block
M3.5 Screw 3 Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Standard Terminal Block, M4 Screw 6 Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Vo+
L
E
Vo-
N
V1 Adjustment
Output On, LED
8.00 (203.2)
2.46 (62.5)
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
System Airflow
Required
Pin 2
Pin 1
Pin 10
Pin 9
1.95
(49.5)
J3: Logic Connector
Pin 1
J1: Fan Connector
4.00
(101.6)
CL
2.86
(72.6)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.4 lb (1.1 kg).
3. Requires system airflow, see thermal considerations.
6.53 (165.80)
0.87
(22.2)
4. J3 Mating plug: JST part no. PHR-2, contact: JST part no.
SPH-002T-P0.5S.
5. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22
AWG JST part no. SPHD-001T-P0.5.
J3 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby (V3)
10 5 V Standby Return (V3)
J1 Fan Connector
(JST B2B-PH-KL (LF) (SN)
Pin
Function
1
+V
2
NC
3
-V
Thermal Considerations (U Channel)
Temperature Measurements (Ambient ≤50 °C)
Recommended
Maximum
Temperature °C
Temperature °C
C55 Capacitor
70
105
T302 Transformer
90
120
C314 Capacitor
70
105
D311 Diode
100
120
Component
10
In order to ensure reliable operation in the end use application the
recommended component temperatures listed should not be exceeded.
Higher temperatures up to the maximum stated can be used but
product lifetime may be reduced.
18 Feb 20
SHP1000 Series
•
1200 W High Line Output Power
•
Rugged Industrial Construction
•
Variable Speed Fan for Noise Reduction
•
-40 °C to +70 °C Operation
•
5 V Standby
•
AC OK, Remote On/Off and Active Current Share
•
Screw Terminals
•
3 Year Warranty
TheSHP1000AC-DCpowersupplyprovidesupto1200Wofoutputpowerinacompactruggedmechanicalpackage,suitablefora
rangeofindustrialapplications.
Theunitcomprisesofamainoutputwithvoltagesfrom12-48VDCanda5VDCstandbysupplywhichcanbeutilitsedwiththe
signalsandcontrolfeaturesoftheunittoprovidedetectionoflossofACinputandremoteon/offcontrol.
Multipleunitscanbeusedinparallelviathecurrentsharefacility,providinghigherpowersolutions.Inherentlylowearthleakage
current,andconductedEMCcompliancetoClassBalsosimplifyhigherpowersystemdesign.
Packagedinacompact9.5”(241mm)x5.9”(150mm)x2.4”(61mm)andcarryingIEC60950familysafetyapprovals,theSHP1000
hasaloaddependantvariablespeedfanisfullyprotectedwithovertemperatureshutdownandprovides-40ºCstartupwithfull
powerfrom-20ºCto50ºCand50%powerat+70ºC.
xppower.com
Models and Ratings
Output Voltage V1
Max Output Current V1
180 VAC
83.0 A
67.0 A
42.0
36.0
28.0
21.0
A
A
A
A
50.0
42.9
33.3
25.0
A
A
A
A
Max Output Power
Standby Supply V2
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
1.0
1.0
1.0
1.0
1.0
1.0
180 VAC
1001 W
1010 W
1013 W
1013 W
1013 W
1013 W
1205 W
1206 W
1204 W
1205 W
Model Number
SHP1000PS12
SHP1000PS15
SHP1000PS24
SHP1000PS28
SHP1000PS36
SHP1000PS48
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Minimum
85
47
Typical
115/230
50/60
Units
VAC
Hz
>0.9
Power Factor
Input Current - No Load
Input Current - Full Load
(1000 W)
Inrush Current
Earth Leakage Current
Input Protection
Maximum
264
63
EN61000-3-2 class A compliant
0.35/0.5
A
115/230 VAC
10.9/5.3
A
115/230 VAC
A
µA
230 VAC cold start, 25 ºC
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
60
75/140
250
T20 A/250 V internal fuse in both lines
Input Derating Curve
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
100
Figure 1
Output Power (%)
90
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
Minimum
12
Typical
Maximum
48
±1 (V1) , ±5 (V2)
±10
±0.2
±0.5
±1 (V1) , ±5 (V2)
Units
VDC
%
%
A
s
ms
%
%
%
4
%
1
145
140
% pk-pk
%
% I nom
0.02
%/˚C
°C
0
0.5
20
Transient Response - V1
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
115
110
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
V1 only. See mechanical details.
230 VAC full load
After 20 min warm up
90-264 VAC
0-100% load.
Recovery within 1% in less than 500 µs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
Output Voltage (V)
14
12
10
8
6
4
Unit enters
hiccup mode
2
0
0
30
40
50
60
70
80
90
Output Current (A)
Figure 2
Typical V1 Overload Characteristic (SHP1000PS12 shown)
3
xppower.com
General
Specifications
Xxxxxxxxxx
Characteristic
Efficiency
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
Mean Time Between Failure
Weight
Minimum
Typical
84
Maximum
3000
1500
500
70/200/130
8.9
Units
%
VAC
VAC
VDC
kHz
W/in3
Notes & Conditions
See fig 3 & 4
PFC converter / Main converter / Standby
275
kHrs
MIL-HDBK-217F at 25 ºC GB
2.1 (940)
lb (g)
See mechanical details
Efficiency vs Load
SHP1000PS12
Figure 3
SHP1000PS48
Figure 4
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
4
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
Current Share
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Standby Supply V2
Isolated 5 V/1.0 A supply, always present when AC supplied.
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
5 V Standby
Pin 9
Max 12 V 20 mA
330R
AC OK Collector
Pin 3
Transistor On (4.5 V): AC OK
AC OK Emitter
Pin 2 (-sense)
5 V Standby
Return Pin 10
J2 Logic Connector
Remote On/Off (Inhibit)
INHIBIT HI
INHIBIT LOW
Figure 6
800 R
POWER SUPPLY
800 R
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
Inhibit Hi
Pin 7
On (4.5 V):
100 R
Inhibit Hi
Pin 7
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Signal
POWER SUPPLY
Chassis J3 Logic Connector
High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
SHP1000PSXX (1)
V1 Output
ns
e
V1 Output
-
Current
Share
s
en
-S
e
se
en
-S
Figure 7
Se
+
+ Sens
+
-
+
e
Se
ns
e
Current
Share
+
+
- Sense
-
SHP1000PSXX (3)
SHP1000PSXX (2)
V1 Output
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply 1
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J3 Connector
Power Supply 2
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J3 Connector
Power Supply 3
AC OK
Collector
Pin 3
Transistor On (4.5 V): AC OK
AC OK Emitter
Pin 2
J3 Connector
Parallel Remote Inhibit Connection
PSU 1
Figure 9
6
PSU 8
PSU 2
Pin 7
Pin 7
Pin 7
Pin 8
Pin 8
Pin 8
Please see figure 6.
xppower.com
Environmental
Characteristic
Minimum
Typical
Maximum
Units
Operating Temperature
-40
+70
°C
Storage Temperature
-40
+85
°C
Notes & Conditions
See derating curve, fig 10.
2 x integral variable speed fans
load dependant. See fig 11.
Non-condensing
Cooling
Humidity
Operating Altitude
5
95
3000
%RH
m
Shock
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis,
total 18 shocks.
Vibration
Single axis 10-500 Hz at 2 g x 10 sweeps
Temperature Derating Curve
Figure 10
Some specification
parameters may not be met
Output Load (%)
100
50
0
-40
-20
0
+50
+70
Ambient Temperature (ºC)
Fan Speed Control
100
Fan Speed (%)
Figure 11
0
0
10
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Low Voltage PSU EMC
Standard
EN61204-3
Test Level
High severity level
Harmonic Current
EN61000-3-2
Class A
ESD
EN61000-4-2
3
A
Radiated
EN61000-4-3
3
A
EFT
EN61000-4-4
3
A
Surges
EN61000-4-5
Installation class 3
A
Conducted
EN61000-4-6
3
A
EN61000-4-11
Dips and Interruptions
SEMI F47
Criteria
as below
Dip: 20% 5000 ms
A
Dip: 30% 500 ms
A
Dip: 60% 200 ms
B
Dip: 100% 5000 ms
B
Notes & Conditions
Compliant
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Standard
EN55032
EN55032
EN61000-3-3
Conducted
Radiated
Voltage Fluctuations
Test Level
Notes & Conditions
Criteria
Class B
Class A
Safety Agency Approvals
Safety Agency
CB Report
UL
TUV
CE
Safety Standard
IEC60950-1:2005 Ed 2 / IEC62368-1:2014
UL 62368-1 & CAN/CSA C22.2 No. 62368-1-14
EN62368-1:2014/A11:2017
LVD
Equipment Protection Class
Safety Standard
Notes & Conditions
IEC60950-1:2005 Ed 2
See safety agency conditions of acceptibility
for details
Class I
Category
Information Technology
Information Technology
Information Technology
Mechanical Details
VO+
VO-
Standard Terminal Block, M6 Screw, 4 Pins 0.62 (16.0) center
Torque 26.0 lbs-in (2.94 Nm)
5.90
(149.8)
2.91
(73.9)
Output On, LED
A
V1 Adjustment
N
1.47
(37.4)
L
2.40 (61.0)
9.48 (240.9)
1.20 (30.5)
9.55 (242.64)
Standard Terminal Block, M4 Screw
3 Pins 0.37 (9.5) center
Torque 10.62 lbs-in (1.2 Nm)
9.41 (238.9)
4 x M4-0.7 THD both side faces
0.15 (3.8) max screw penetration
max torque 10.62 lbs-in (1.2 Nm)
B
B
Airflow
1.20 (30.5)
4 x M4-0.7 THD both side faces
0.15 (3.8) max screw penetration
max torque 10.62 lbs-in (1.2 Nm)
B
B
4.50
(114.3)
CL
Pin 2
Pin 1
Pin 10
Pin 9
B
J3 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby
10
-5 V Standby
B
Detail A J3: Logic Connector
6.70 (170.2)
1.33 (33.8)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.8 lb (1.25 kg).
8
3. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
18 Feb 20
工商网监
湘ICP备2023018690号
