CN015PZ-2001-1

Series CN015 - Type 20 Direct Mounting, Screw Fixing (with Ejector) Specifications 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 40mΩ max. (initial resistance) excluding conductor resistance of terminal (25mΩ) Voltage Rating: 250V AC Current Rating: 0.5A Operating Temp. Range: –20°C to +60°C Insulation Resistance: Withstanding Voltage: Contact Resistance: Card Connectors Part Number (Details) Series No. Applications: RZ = 3.3V for SmartMedia Card (3.3V) PZ = 3.3V / 5V for SmartMedia Card (3.3V) and (5V) Type 20 PCB Mounting: 1 = Screw Lock Type (Screw ∅2.2mm See Note 1) Height of Stand-off: ***) 0 = A(0.00mm), B(4.80mm), C(2.80mm) 1 = A(2.00mm), B(6.80mm), C(4.80mm) ***) Dimensions A, B and C are shown in drawings below. Materials and Finish Contact: PB / Ni-AU Insulator Base: PPS Features  Realizing smooth extraction of SmartMedia by ejection function  Stand-off types are available to mount components under the body of CN015  Adapting sequential method to secure data protection by contacting in the order of Ground-Power-Signal correctly Type 20 with Screw Lock PCB Mounting: Type 1 (Screw Lock) = ∅2.20 Recommended PCB Layout Top View 4-∅2.20 (Screw Lock) Note 1: Recommended screw - M2.0 x length (thickness of PC board thickness of flange +2.0mm) Special notice for operation: Never soak and wash after soldering. There are cases where SmartMedia can not be smoothly inserted because of flux remaining inside of the connector, after washing. Wash only part of the connector terminal on PC board. Function Table Part Number CN015RZ-2001-0 CN015RZ-2001-1 CN015PZ-2001-0 CN015PZ-2001-1 Voltage of SmartMedia 3.3V Ejector Yes Mis-insertion Protection Yes Sequential Contact Yes Write Protection Switch Yes 3.3V / 5V Yes No Yes Yes Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER SmartMedia - SSFDC CN015 *Z - 20 0 1 - * Card Connectors Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Series CN015 - Type 20 Direct Mounting, SMT Fixing (with Ejector) Part Number (Details) 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 40mΩ max. (initial resistance) excluding conductor resistance of terminal (25mΩ) Voltage Rating: 250V AC Current Rating: 0.5A Operating Temp. Range: –20°C to +60°C CN015 Series No. RZ - 20 0 3 - 0 RZ = 3.3V for SmartMedia Card (3.3V) Type 20 PCB Mounting: 3 = SMT Fixing Metal Pads Materials and Finish Contact: PB / Ni-Au Insulator Base: PPS (glass filled) black Height of Stand-off: ***) 0 = A(0.00mm), B(4.80mm), C(2.80mm) ***) Dimensions A, B and C are shown in drawings below. Features  Realizing smooth extraction of SmartMedia by ejection function  Stand-off types are available to mount components under the body of CN015  Adapting sequential method to secure data protection by contacting in the order of Ground-Power-Signal correctly Type 20 with SMT Metal Pads (3.3V) Recommended PCB Layout Top View Function Table Part Number CN015RZ-2003-0 Connectors Special notice for operation: Never soak and wash after soldering. There are cases whereSmartMedia can not be smoothly inserted because of flux remaining inside of the connector, after washing. Wash only part of the connector terminal on PC board. Voltage of SmartMedia 3.3V Ejector Yes Mis-insertion Protection Yes Sequential Contact Yes Write Protection Switch Yes SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER