Card Connectors
Specifications
Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Soldering Temp.:
Series CNS PCMCIA II Slot - Single Deck (SMT Type)
Part Number (Details)
1,000MΩ min. 500V ACrms for 1 minute 40mΩ max. 0.5A per contact Rear socket: 220°C /40 sec., 240°C peak
CNS
Series S = Single Deck
-
S T P -A R -8 3 -A- 1
PCB Mounting Style: T = Top B = Bottom
Materials and Finish
Insulator: Contact: Plating:PBT, glass filled (UL94V-0) Phosphor Bronze Header: Card side - Au 0.3µm over Ni 2.0µm Rear side - Au flash over Ni 2.0µm Rear Socket: Mating side - Au 0.2µm over Ni 1.0µm Solder side - Au flash over Ni 1.0µm Stainless Steel Phosphor Bronze Au over Ni
Voltage Style: P = 3.3V / 5V Card A = Plastic Lever B = Metal Lever C = Foldable Lever D = 2 Step Lever E = Without Ejector Eject Lever: R = Right
Plate: Side Contact: Plating:
L = Left
*Height of Stand-off: 1 = 0mm 4 = 2.2mm Nut Insert:
8 = 5.0mm
Features
SMT connector makes assembly and rework easier Small, light and low profile connector meets all kinds of PC card system requirements Various product combinations single or double deck, right or left eject lever, polarization styles, various stand-off heights, fully supports the customer’s design needs Convenience of PC card removal with push type eject lever
0 = None (on request) 1 = Header (on request) 2 = Guide (on request) 3 = Header / Guide (standard) A = None B = Top C = Bottom D = Top / Bottom no mark = None 1 = Top 2 = Bottom 3 = Top and Bottom
Shield Plate:
Kapton Film:
*Stand-off products 0.0 and 2.2mm are subject to a minimum order quantity of 1,120 pcs.
Part Number (Details) for Rear Socket
PCMCIA - 1260
Packing Number
-
*
Available Types 0 = Without Kapton Film (Tray) 1 = With Kapton Film (Tray) 9 = With Kapton Film (Tape & Reel,1,500 pcs. per reel)
A-46
Connectors
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
T rading Division
Series CNS PCMCIA II Slot - Single Deck (SMT Type)
Example: Single Deck SMT Fixing with 5.0mm Stand-off
Rear Socket
5.0
Card Connectors
A
Rear Socket Section Details
Section A - A
Contact Dimensions at
A
Length 5.00 ±0.1 3.50 ±0.1 4.25 ±0.1 Section B - B
Contacts A1, A17, A34, A35, A51 and A68 Contacts A36 and A67 All other contacts
Example PCB Layout
With Stand-off Please Note: this hole for stand-off 2.2mm and 5.0mm lies on the center line with the SMD pad Without Stand-off
Top View
Detail A
T rading Division
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Connectors
A-47
PCMCIA II Slot
