MiniDIN Series
1st End
Cable Assemblies for Standard MiniDIN
2nd End
RoHS
∅ 12.0
Ordering Code
CTMD
MiniDIN Cable Assembly Pin Count (1st End): 3,4,5,6,7,8 and 9 Connector Type (1st End): P = Male J = Female Pin Count (2nd End): 3,4,5,6,7,8 and 9 0 = Open End
5
P– 5
J
1
S
AO 1500
Connector Type (2nd End): P = Male J = Female O = Open End (Cut Off) V = Open End, Jacket Stripped 40mm, Wire Ends Twisted and Tinned 5mm Housing Types (See Drawings Below): 1 = Type 1 (Standard) 4 = Type 4 5 = Type 5 (Male with 3 to 8 pins and Female with 8 pins only) Colour Code: S = Black (Standard)
G = Grey
B = Beige
Cable (Shielding and UL-Approval): AO = AWG26 (Standard) with Alu-foil, without UL-Approval AX = AWG24 or AWG28 with Alu-foil, without UL-Approval AU = AWG24, 26 or 28 with Alu-foil, with UL-Approval CU = AWG24, 26 or 28 with Cu braided Shield and with Alu-foil, with UL-Approval OO = AWG 24, 26 or 28 Unshielded, without UL-Approval Info: Shielded cabels always come with Drain Wire! OO = Minimum Ordering Length for Cable is 3,000 meters All others = Minimum Ordering Length for Cable 1,000 meters Overall Length
Housing Types
Type 1 (Moulded)
Round Type (std.)
Type 4 (Moulded)
Conical Type
Type 5 (Mounted)
‘Quick Lock’ Housing
Male or Female 3 to 9 pins Min. Order Qty. 100 pcs.
Trading Division
Male or Female 3 to 9 pins Min. Order Qty. 100 pcs.
Male 3 to 8 pins Female 8 pins only Min. Order Qty. 100 pcs.
Sockets and Connectors
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
