CTMD4P-3J5GAO1500

MiniDIN Series 1st End Cable Assemblies for Standard MiniDIN 2nd End RoHS ∅ 12.0 Ordering Code CTMD MiniDIN Cable Assembly Pin Count (1st End): 3,4,5,6,7,8 and 9 Connector Type (1st End): P = Male J = Female Pin Count (2nd End): 3,4,5,6,7,8 and 9 0 = Open End 5 P– 5 J 1 S AO 1500 Connector Type (2nd End): P = Male J = Female O = Open End (Cut Off) V = Open End, Jacket Stripped 40mm, Wire Ends Twisted and Tinned 5mm Housing Types (See Drawings Below): 1 = Type 1 (Standard) 4 = Type 4 5 = Type 5 (Male with 3 to 8 pins and Female with 8 pins only) Colour Code: S = Black (Standard) G = Grey B = Beige Cable (Shielding and UL-Approval): AO = AWG26 (Standard) with Alu-foil, without UL-Approval AX = AWG24 or AWG28 with Alu-foil, without UL-Approval AU = AWG24, 26 or 28 with Alu-foil, with UL-Approval CU = AWG24, 26 or 28 with Cu braided Shield and with Alu-foil, with UL-Approval OO = AWG 24, 26 or 28 Unshielded, without UL-Approval Info: Shielded cabels always come with Drain Wire! OO = Minimum Ordering Length for Cable is 3,000 meters All others = Minimum Ordering Length for Cable 1,000 meters Overall Length Housing Types Type 1 (Moulded) Round Type (std.) Type 4 (Moulded) Conical Type Type 5 (Mounted) ‘Quick Lock’ Housing Male or Female 3 to 9 pins Min. Order Qty. 100 pcs. Trading Division Male or Female 3 to 9 pins Min. Order Qty. 100 pcs. Male 3 to 8 pins Female 8 pins only Min. Order Qty. 100 pcs. Sockets and Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER