FNS Series
Specifications
Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range:
DIN41612 - IDC Type Socket, 64 Leads
Part Number (Details)
106MΩ min. at 500V DC 1,000V AC rms for 1 minute 20mΩ max. at 10mA 1A –65°C to +85°C
FNS12
Series No. No. of Leads
-
064 00-00 B F
Materials and Finish
Housing: PBT (glass filled), UL 94V-0 rated Contacts: Copper Alloy Plating: Mating Face Contacts - Au over Nickel IDC Terminals - Flash Au over Nickel
Terminal Type 00 = IDC Contact Plating in Mating Area: B = Au 0.3µm min. over Ni Contact Plating in IDC Area: F = Flash Au over Ni
Features
2.54mm pitch IDC type connectors for 1.27mm cable, conforming to DIN41612 standards of compatibility
Part Number for Strain Relief: FNS13-06400-1000 Applicable Cables (see Section D)
AWG 28 stranded wire, AWG 30 solid wire, with 1.27mm pitch
Outline Dimensions
Applicable Tool for FNS Series
Hand press: FX-003 Positioning Tool for FNS12 = Part No. FN-106
Contact Details (contacts in rows A and B)
2.54 + 0.1 – 0.80
(1.80)
SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
(15.20)
Sockets and Connectors
FNS Series
Specifications
Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range:
DIN41612 - IDC Type Socket, 64 Leads
Part Number (Details)
106MΩ min. at 500V DC 1,000V AC rms for 1 minute 20mΩ max. at 10mA 1A –65°C to +85°C
FNS13
Series No. No. of Leads
-
064 00-00
BF
Materials and Finish
Housing: PBT (glass filled), UL 94V-0 rated Contacts: Copper Alloy Plating: Mating Face Contacts - Au over Nickel IDC Terminals - Flash Au over Nickel
Terminal Type 00 = IDC Contact Plating in Mating Area: B = Au 0.3µm min. over Ni Contact Plating in IDC Area: F = Flash Au over Ni
Features
2.54mm pitch IDC type connectors for 1.27mm cable, conforming to DIN41612 standards of compatibility
Part Number for Strain Relief: FNS13-06400-1000 Applicable Cables (see Section D) AWG 28 stranded wire, AWG 30 solid wire, with 1.27mm pitch
Outline Dimensions
Applicable Tool for FNS Series
Hand press: FX-003 Positioning Tool for FNS13 = Part No. FN-105
Contact Details (contacts in rows A and C)
5.08 + 0.1 – 2.54 + 0.1 – 0.80
(1.80)
Sockets and Connectors SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
(15.20)
FNS Series
Specifications
Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range:
DIN41612 - IDC Type Socket, 96 Leads
Part Number (Details)
106MΩ min. at 500V DC 1,000V AC rms for 1 minute 20mΩ max. at 10mA 1A –65°C to +85°C
FNS13
Series No. No. of Leads
-
096 00 -00 B F
Materials and Finish
Housing: PBT (glass filled), UL 94V-0 rated Contacts: Copper Alloy Plating: Mating Face Contacts - Au over Nickel IDC Terminals - Au over Nickel
Terminal Type 00 = IDC Contact Plating in Mating Area: B = Au 0.3µm min. over Ni Contact Plating in IDC Area: F =Flash Au over Ni
Features
2.54mm pitch IDC type connectors for 0.847mm cable, conforming to DIN41612 standards of compatibility
Part Number for Strain Relief: FNS13-06400-1000 Applicable Cables (see Section D) AWG 28 stranded wire, AWG 30 solid wire, with 1.27mm pitch
Outline Dimensions
Applicable Tool for FNS Series
Hand press: FX-003 Positioning Tool for FNS13 = Part No. FN-105
Contact Details (contacts in rows A, B and C)
SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Sockets and Connectors
FNS Series (Cable)
Specifications
Insulation Resistance: Withstanding Voltage: Current Rating: Voltage Rating: Conductor Resistance: Characteristic Impedance: Capacity: Dimension: Operating Temp. Range:
33MIL (0.847mm), Hitachi Cable (150V, 105°C)
Part Number (Details)
5MΩ / km min. at 20°C 1,500V AC / min. 0.5A 150V max. 362Ω / km max. at 20°C 89Ω approx. (ground- signal- ground) 65pF / m at 1kHz (ground- signal- ground) AWG 30 –20°C to +105°C
TFC30
Series No.
- 96 (0.847) *
No. of Conductors: 96 Packing Sizes: – = In Rolls (30.5 meters) / M = 1 meter
Features
33MIL, 0.847mm pitch flat cable designed for termination with DIN41612 IDC connectors (96 pos.) ➭ AWG 30 (7/0.1mm) stranded Cu-wire ➭ UL Style No. 2678
Standard Cable Length
see Part Number (Details)
Applicable Tools for FNS Series
Hand press: FX-003 Positioning Tools for FNS12: FN-106 FNS13: FN-105
Outline Cable Dimensions
80.47±0.2 (96 conductors) 81.31±0.25 (96 conductors)
Sockets and Connectors
SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
很抱歉,暂时无法提供与“FNS13-06400-00BF”相匹配的价格&库存,您可以联系我们找货
免费人工找货