HF601-20-02

Series HF601 Flip Type ZIF Connector 90°, SMT (0.50mm Pitch) Specifications Insulation Resistance: Contact Resistance: Withstanding Voltage: Voltage Rating: Current Rating: Operating Temp. Range: Mating Cycles: 500MΩ min. 50mΩ max. 500V AC for 1 minute 50V AC 0.5A -40°C to +85°C 20 times High Speed Connectors Part Number (Details) HF601 Series No. - ** - 02 Pin Counts (10, 20, 26, 30, 40 45, 50 and 60) Design No. Materials and Finish Insulator: Actuator: Contact: LCP PA9T Copper Alloy, Au over Ni Features  Flip type ZIF connector , SMT  Super low profile, height = 2mm  FFC/FPC with and without positioning part can be used  Packaging tape and reel (1,200 pcs. per reel) Outline Dimensions for 90° Connector Recommended PCB Layout Recommended FFC/FPC Part Number HF601-10-02 HF601-20-02 HF601-26-02 HF601-30-02 HF601-40-02 HF601-45-02 HF601-50-02 HF601-60-02 Pin Count 10 20 26 30 40 45 50 60 A 4.50 9.50 12.50 14.50 19.50 22.00 24.50 29.50 B 9.70 14.70 17.70 19.70 24.70 27.20 29.70 34.70 C 10.50 15.50 18.50 20.50 25.50 28.00 30.50 35.50 D 5.50 10.50 13.50 15.50 20.50 23.00 25.50 30.50 E 7.10 12.10 15.10 17.10 22.10 24.60 27.10 32.10 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER C-9 Non-ZIF Connectors for High Speed Cable High Speed Connectors Specifications Insulation Resistance: Conductor Resistance. Withstanding Voltage: Voltage Rating: Operating Temp. Range: Series HF601 Flexible Flat Cable, 0.50mm Pitch Part Number (Details) 1,00MΩ 2.2 Ω / meter 500V AC rms for 1 minute 60V (UL20706) -40°C to +105°C (UL20706) HF601 Series No. Pitch: 0.5mm - F5 - ** - *** - * * - F - * Materials and Finish Conductor: AU plated Cu Insulation Tape: Polyester, white Supporting Tape: Polyester, blue Pin Counts 10, 20, 26, 30, 40, 45, 50, and 60 Insulation Length in mm Total length – 8 mm (2 x stipped lenght) Direction of Supporting Tape A = same B = opposite 0 = No ears 1 = Ear one side 2 = Ears both sides Plating: F = Au UL-Number V = UL20706/20861 Features  Versions with posistioning part available on request  Minimum order quantity may occur Outline Dimensions Item N P TP W T M I S TT H A b Description Number of Conductors Pitch in mm Total Pitch Stiffener Width Thickness of FFC Margin Width Insulation length Stripped Length Terminal Thickness Supporting tape lenght Conductor width Conductor thickness Specification 10, 20, 26, 30, 40, 45, 50, 60 0.5mm P x (n-1) P x (n +1) 0.15mm 0.35mm Total le ngth divided by 2 x S 4.0mm 0.3mm 6.0mm 0.3 +0.05mm 0.035 C-10 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER