ESD3V3LB

RoHS ESD3V3LB  COMPLIANT   1-Line, Bi-directional, Transient Voltage Suppressor Features ● Stand-off voltage: 3.3V Max ● Transient protection for each line according to IEC61000-4-2(ESD): ±30kV (contact) IEC61000-4-4 (EFT): 40A (5/50ns) IEC61000-4-5(surge): 9A (8/20μs) ● Low leakage current ● Low clamping voltage ●Low clamping voltage: VCL = 9V typ. @ IPP = 16A (TLP) ● RoHS Compliant Applications ● Cellular handsets ● Tablets ● Laptops ● Network communication devices ● Other portable devices Mechanical Data ● Package: DFN1006-2L ● Case Material: “Green” Molding Compound ● Marking Information: See Below DFN1006‐2L  ■Definitions of electrical characteristics 1/6 S-D093 Rev.1.2,19-Apr-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com ESD3V3LB    ■Maximum Ratings PARAMETER SYMBOL Rating UNIT Peak pulse power (tp = 8/20μs) Ppk 90 W Peak pulse current (tp = 8/20μs) IPP 9 A ±30 KV ±30 KV ESD according to IEC61000-4-2 air discharge VESD ESD according to IEC61000-4-2 contact discharge Junction temperature TJ 125 o Storage temperature TSTG -55~150 o C C ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） PARAMETER Symbol UNIT VRWM V IR nA VRWM =3.3V VBR V IBR = 1mA 3.5 4 VHOLD V IHOLD = 50mA 3.5 4 Clamping voltage 1) VCL V IPP = 16A, tp = 100ns Dynamic resistance 1) RDYN Ω Clamping voltage 2) VCL V VESD = 8kV V IPP = 1A, tp = 8/20μs 6 Clamping voltage 3) VCL V IPP = 9A, tp = 8/20μs 10 pF VR = 0V, f = 1MHz 10 13 pF VR = 2.5V, f = 1MHz 8 11 Reverse maximum working voltage Reverse leakage current Reverse breakdown voltage Reverse holding voltage Junction capacitance Conditions Min Typ Max ±3.3 100 9.0 0.2 9.0 CJ (1). TLP parameter: Z0 = 50Ω, tp = 100ns, tr = 2ns, averaging window from 60ns to 80ns. RDYN is calculated from 4A to 16A. (2). Contact discharge mode, according to IEC61000-4-2. (3). Non-repetitive current pulse, according to IEC61000-4-5. ■Ordering Information (Example) PREFERED P/N UNIT WEIGHT(mg) MINIMUM PACKAGE(pcs) ESD3V3LB Approximate 0.9 10000 INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE 400000 Tape & reel 100000 2/6 S-D093 Rev.1.2,19-Apr-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com ESD3V3LB    ■ Characteristics (Typical) Fig.2 Contact discharge current waveform per IEC61000-4-2 100 90 Front time: T1= 1.25 T = 8s 100 90 Current (%) Time to half-value: T2= 20s 50 T2 10 5 T T1 10 15 Time (s) 20 25 Peak pulse power (W) VC - Clamping voltage (V)     Fig.3 Clamping voltage vs. Peak pulse current     9   Pulse waveform: tp = 8/20s   8       7     Pin2 to Pin1 6   Pin1 to Pin2     5     4 0 1 2   3 4 5 6 7 8 9 10   IPP - Peak pulse current (A)     Fig.5 Non-repetitive peak pulse power vs. Pulse time     1000         100         10         1   10 1 100 1000   Pulse time (s)   tr = 0.7~1ns t 60ns 30ns 30 CJ - Junction capacitance (Normalization) 10 0 0 Time (ns) Fig.4 Capacitance vs. Reverse voltage 11 f = 1MHz VAC = 50mV 10 9 8 7 6 -4 -3 -2 -1 0 1 2 3 4 VR - Reverse voltage (V) Fig.6 Power derating vs. Ambient temperature 100 % of Rated power Peak pulse current (%) Fig.1 8/20μs waveform per IEC61000-4-5 80 60 40 20 0 0 25 50 75 100 125 150 o TA - Ambient temperature ( C) 3/6 S-D093 Rev.1.2,19-Apr-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com ESD3V3LB    TLP current (A)   Fig.7 ESD clamping (+8kV contact discharge per IEC61000-4-2) Fig.8 ESD clamping (-8kV contact discharge per IEC61000-4-2)                             Fig.9 TLP Measurement     Z0 =  50   tr = 2ns   tp = 100ns                    20 16 12 8 4 0 -4 -8 -12 -16 -20 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 TLP voltage (V) ■ Outline Dimensions SYMBOL D E A A1 A2 F G L b e MIN 0.50 0.90 0.35 MILLIMETER NOM 0.60 1.00 0.45 0.15 BSC MAX 0.70 1.10 0.55 0.10 0.005 0.005 0.15 0.41 0.25 0.50 0.65 BSC 0.35 0.59 4/6 S-D093 Rev.1.2,19-Apr-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com ESD3V3LB    ■ Recommended PCB Layout                     Unit:mm Notes: This recommended land pattern is for reference purposes only. Please consult your manufacturing group to ensure your PCB design guidelines are met  5/6 S-D093 Rev.1.2,19-Apr-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com ESD3V3LB    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 6/6 S-D093 Rev.1.2,19-Apr-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com