G1MF-F1-0000HF

RoHS M1 THRU M7  COMPLIANT   Surface Mount General Purpose Rectifier Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Typical Applications For use in general purpose rectification of power supplies, inverters, converters, and freewheeling diodes for consumer and telecommunication. Mechanical Data ● Package: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: Cathode line denotes the cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Device marking code M1 M2 M3 M4 M5 M6 M7 M1 M2 M3 M4 M5 M6 M7 Maximum Repetitive Peak Reverse Voltage VRRM V 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS V 35 70 140 280 420 560 700 VDC V 50 100 200 400 600 800 1000 Average rectified output current @60Hz sine wave, Resistance load, TL (FIG.1) IO A Forward Surge Current (Non-repetitive) @60Hz Half-sine wave,1 cycle, Tj=25℃ Forward Surge Current (Non-repetitive) @1ms, square wave, 1 cycle, Tj=25℃ IFSM A Maximum DC blocking Voltage 1.0 30 60 Current squared time @1ms≤t8.3≤ms Tj=25℃，Rating of per diode Typical junction capacitance @Measured at 1MHz and Applied Reverse Voltage of 4.0 V.D.C I2t A2s 3.7 Cj pF 6 Storage temperature Tstg ℃ -55 ~ +150 Junction temperature Tj ℃ -55 ~ +150 ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） SYMBOL UNIT TEST CONDITIONS Maximum instantaneous forward voltage drop per diode VF V IFM=1.0A 1.1 Maximum DC reverse current at rated DC blocking voltage per diode IR Tj =25℃ 5 μA Tj =125℃ 100 PARAMETER M1 M2 M3 M4 M5 M6 M7 1/4 S-S1682 Rev.1.7,07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com M1 THRU M7    ■Thermal Characteristics （Ta=25℃ Unless otherwise specified） PARAMETER Typical Thermal Resistance M1 M2 M3 M4 SYMBOL UNIT RθJ-A(1) ℃/W 75 RθJ-L(1) ℃/W 25 RθJ-C(1) ℃/W 20 M5 M6 M7 Note (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas ■Ordering Information (Example) PREFERED P/N PACKAGE CODE UNIT WEIGHT(g) MINIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE M1~M7 F1 Approximate 0.059 5000 10000 80000 13” reel M1~M7 F2 Approximate 0.059 7500 15000 120000 13” reel M1~M7 F3 Approximate 0.059 7500 15000 60000 13” reel M1~M7 F4 Approximate 0.059 1800 14400 57600 7” reel M1~M7 F5 Approximate 0.059 2000 16000 64000 7” reel M1~M7 F6 Approximate 0.059 5000 10000 100000 13” reel ■ Characteristics (Typical)               FIG.1: Io-TL Curve FIG.2: Forward Surge Current Capability 1.0 30 Peak Forward Surge Current (A) Average Forward Output Current (A)                               0.8 0.6 0.4 0.2 0 24 8.3ms Single Half Sine Wave JEDEC Method 18 12 6 0 0 50 100 1 150 2 4 6 8 10 20 40 60 80 100 Number of Cycles Lead Temperature (℃) 2/4 S-S1682 Rev.1.7,07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com M1 THRU M7    FIG.3: Typical Forward Voltage FIG.4: Typical Reverse Characteristics 1000 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) 100 10 1.0 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 100 Tj=125℃ 10 1.0 Tj=25℃ 0.1 0.01 1.6 0 Instantaneous Forward Voltage (V) 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) ■ Outline Dimensions DO-214AC(SMA) DO-214AC(SMA) A B C D G F H E Dim Min Max A 1.25 1.58 B 2.40 2.83 C 4.06 4.75 D 1.90 2.30 E 4.93 5.28 F 0.76 1.41 G 0.08 0.20 H 0.15 0.31 Dimensions in millimeters ■ Suggested Pad Layout P3 P2 DO-214AC(SMA) Q2 Q1 P1 Dim Millimeters P1 4.00 P2 1.50 P3 6.50 Q1  2.50 Q2  1.70 Dimensions in millimeters 3/4 S-S1682 Rev.1.7,07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com M1 THRU M7    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 4/4 S-S1682 Rev.1.7,07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com