GS8M-F1-0000

RoHS GS8A THRU GS8M  COMPLIANT   Surface Mount General Purpose Rectifier Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Typical Applications For use in general purpose rectification of power supplies, inverters, converters, and freewheeling diodes for consumer, and telecommunication. Mechanical Data ● Package: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: Color band denotes the cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Device marking code GS8A GS8B GS8D GS8G GS8J GS8K GS8M GS8A GS8B GS8D GS8G GS8J GS8K GS8M Maximum Repetitive peak reverse voltage VRRM V 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS V 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VDC V 50 100 200 400 600 800 1000 IO A IFSM A Average Rectified Output Current @60Hz sine wave, Resistance load, TL (FIG.1) Forward Surge Current (Non-repetitive) @60Hz Half-sine wave,1 cycle, Tj=25℃ Forward Surge Current (Non-repetitive) @1ms, square wave, 1 cycle, Tj=25℃ 8.0 200 400 Current squared time @1ms≤t8.3≤ms Tj=25℃，Rating of per diode Typical junction capacitance @Measured at 1MHz and Applied Reverse Voltage of 4.0 V.D.C I2t A2s 166 Cj pF 55 Storage Temperature Tstg ℃ -55 ~ +150 Junction Temperature Tj ℃ -55 ~ +150 1/4 S-S379 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com GS8A THRU GS8M    ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Maximum instantaneous forward voltage drop per diode VF V Maximum DC reverse current at rated DC blocking voltage per diode IR μA GS8A TEST CONDITIONS GS8B GS8D GS8G IFM=8.0A 1.1 Tj =25℃ 5 Tj =125℃ 100 GS8J GS8K GS8M ■Thermal Characteristics （Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT GS8A GS8B GS8D GS8G RθJ-A(1) RθJ-L(1) Typical Thermal resistance GS8J GS8K GS8M 50 ℃/W 18 RθJ-C(1) 15 Note(1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.6" x 0.6" (16 mm x 16 mm) copper pad areas ■Ordering Information (Example) PREFERED P/N PACKAGE CODE UNIT WEIGHT(g) MINIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE GS8A~GS8M F1 Approximate 0.261 3000 6000 42000 13” reel ■ Characteristics(Typical) FIG.2: Forward Surge Current Capability FIG.1: Io-TL Curve 200 12.0 Peak Forward Surge Current (A) Average Forward Output Current (A) 13.0 10.0 8.0 6.0 4.0 Resistive or Inductive Load P.C.B. Mounted on 0.6"×0.6" (16mm×16mm)Copper Pad Areas 2.0 0 160 8.3ms Single Half Sine Wave JEDEC Method 120 80 40 0 25 50 75 100 125 150 1 Lead Temperature (℃) 2 4 6 8 10 20 40 60 80 100 Number of Cycles 2/4 S-S379 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com GS8A THRU GS8M    FIG.4: Typical Reverse Characteristics FIG.3: Typical Forward Voltage 100 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) 100 10 1.0 0.1 0.01 0.4 0.5 0.7 0.6 0.8 0.9 1.0 1.1 1.0 0.1 Tj=25℃ 0.01 0.001 Instantaneous Forward Voltage (V) Tj=125℃ 10 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) ■ Outline Dimensions DO-214AB(SMC) DO-214AB (SMC) Dim Min Max A 6.60 7.11 B 2.85 3.27 C 5.59 6.22 D 7.75 8.13 E 1.99 2.61 F 0.15 0.31 G 0.76 1.52 H 0.10 0.20 Dimensions in millimeters ■ Suggested pad layout Dim P2 Q1 Typ P1 9.9 P2 3.84 Q1  3.03 Q2  3.82 Q2 P1 Dimensions in millimeters 3/4 S-S379 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com GS8A THRU GS8M    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 4/4 S-S379 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com