HS1G-F1-0000HF

  RoHS HS1A THRU HS1M  COMPLIANT   Surface Mount High Efficient Rectifier Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ● Super fast reverse recovery time ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Typical Applications For use in high frequency rectification of power supplies, inverters, converters, and freewheeling diodes for consumer, and telecommunication. Mechanical Data ● Package: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: Cathode line denotes the cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Device marking code HS1A HS1B HS1D HS1F HS1G HS1J HS1K HS1M HS1A HS1B HS1D HS1F HS1G HS1J HS1K HS1M Maximum Repetitive Peak Reverse Voltage VRRM V 50 100 200 300 400 600 800 1000 Maximum RMS Voltage VRMS V 35 70 140 210 280 420 560 700 VDC V 50 100 200 300 400 600 800 1000 IO A IFSM A Maximum DC blocking Voltage Average rectified output current @60Hz sine wave, Resistance load, TL (FIG.1) Forward Surge Current (Non-repetitive) @60Hz Half-sine wave,1 cycle, Tj=25℃ Forward Surge Current (Non-repetitive) @1ms, square wave, 1 cycle, Tj=25℃ 1.0 30 60 Current squared time @1ms≤t8.3≤ms Tj=25℃，Rating of per diode Typical junction capacitance @Measured at 1MHz and Applied Reverse Voltage of 4.0 V.D.C I2t A2s Cj pF Storage temperature Tstg ℃ -55 ~ +150 Junction temperature Tj ℃ -55 ~ +150 3.735 17 12 7 ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） PARAMETER Maximum instantaneous forward voltage drop per diode SYMBOL UNIT VF TEST CONDITIONS V IFM=1.0A IF=0.5A,IR=1.0A, Irr=0.25A Maximum reverse recovery time trr ns Maximum DC reverse current at rated DC blocking voltage per diode IR μA HS1A HS1B HS1D HS1F 1.0 HS1G 1.3 50 HS1J HS1K HS1M 1.7 75 Tj =25℃ 5 Tj =125℃ 100 1/5 S-S062 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   HS1A THRU HS1M    ■Thermal Characteristics （Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT HS1A HS1B HS1D HS1F RθJ-A(1) HS1J HS1K HS1M 75 ℃/W RθJ-L(1) Typical Thermal resistance HS1G 28 RθJ-C(1) 22 Note (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas ■ Characteristics (Typical) FIG.2: Forward Surge Current Capability FIG.1: Io-TL Cure 1.40 30 1.20 Peak Forward Surge Current (A) Average Forward Output Current(A)                           1.00 0.80 0.60 0.40 60Hz Resistive or Inductive Load P.C.B. Mounted on 0.2"×0.2" (5.0mm×5.0mm)Copper Pad Areas 0.20 0 0 30 60 90 120 24 8.3ms Single Half Sine Wave JEDEC Method 18 12 6 0 150 4 6 8 10 20 40 60 80 100 FIG.4: Typical Reverse Characteristics FIG.3: Typical Forward Characteristics 100 Instantaneous Reverse Current (uA)   Instantaneous Forward Current (A) 2 Number of Cycles 100             1 Lead Temperature(℃) HS1F-HS1G 10 HS1A-HS1D 1.0 HS1J-HS1M 0.1 0.01 0.4 10 1.0 0.1 Tj=25℃ 0.01 0.001 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Tj=125℃ 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) 2/5 S-S062 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   HS1A THRU HS1M    FIG.5: Diagram of circuit and Testing wave form of reverse recovery time 10 Ω NONINDUCTIVE 50 Ω NONINDUCTIVE trr +0.5A (-) DUT (+) 0 PULSE GENERATOR (NOTE2) (-) 1Ω NONINDUCTIV OSCILLOSCOPE (NOTE1) -0.25A (+) NOTES: 1.Rise Time=7ns max .Inpot Impedance=1M Ω 22pf 2.Rise Time=10ns max.Sourse Impedance=50 Ω -1.0A 1cm SET TIME BASE FOR 5/10ns/cm ■Ordering Information (Example) PREFERED P/N PACKAGE CODE UNIT WEIGHT(g) MINIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE HS1A-HS1M F1 Approximate 0.059 5000 10000 80000 13” reel HS1A-HS1M F2 Approximate 0.059 7500 15000 120000 13” reel HS1A-HS1M F3 Approximate 0.059 7500 15000 60000 13” reel HS1A-HS1M F4 Approximate 0.059 1800 14400 57600 7” reel HS1A-HS1M F5 Approximate 0.059 2000 16000 64000 7” reel HS1A-HS1M F6 Approximate 0.059 5000 10000 100000 13” reel ■ Outline Dimensions DO-214AC(SMA) A DO-214AC(SMA) B C D F G H Dim Min Max A 1.25 1.58 B 2.40 2.83 C 4.06 4.75 D 1.90 2.30 E 4.93 5.28 F 0.76 1.41 G 0.08 0.20 H 0.15 0.31 E Dimensions in millimeters 3/5 S-S062 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   HS1A THRU HS1M    ■Suggested Pad Layout DO-214AC(SMA) P3 P2 Q2 Q1 Dim Millimeters P1 4.00 P2 1.50 P3 6.50 Q1  2.50 Q2  1.70 P1 Dimensions in millimeters 4/5 S-S062 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com   HS1A THRU HS1M    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 5/5 S-S062 Rev. 2.5, 07-Jan-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com