HS5M

RoHS HS5A THRU HS5M  COMPLIANT   Surface Mount High Efficient Rectifier Features ● High current capability ● High Reliability ● High forward surge current capability ● Solder dip 260 °C max. 10 s, per JESD 22-B106 Mechanical Data ● Package: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant ● Terminals: Tin plated leads, solderable per J-STD002 and JESD22-B102 ● Polarity:Color band denotes cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Device marking code HS5A HS5B HS5D HS5F HS5G HS5J HS5K HS5M HS5A HS5B HS5D HS5F HS5G HS5J HS5K HS5M 50 100 200 300 400 600 800 1000 HS5K HS5M VRRM V IO A 5.0 Forward Surge Current (Non-repetitive) @60Hz Half-sine wave,1 cycle, Ta=25℃ IFSM A 150 Storage Temperature Tstg ℃ -55 ~+150 Junction Temperature Tj ℃ -55 ~+150 Repetitive Peak Reverse Voltage Average Rectified Output Current @60Hz sine wave, Resistance load, TL (FIG.1) ■Electrical Characteristics（Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT TEST CONDITIONS Maximum instantaneous forward voltage drop per diode VF V IFM=5.0A Maximum reverse recovery time TRR ns IF=0.5A,IR=1.0A, Irr=0.25A Maximum DC reverse current at rated DC blocking voltage per diode IR μA Typical junction capacitance Cj pF HS5A HS5B HS5D 1.0 HS5F HS5G 1.3 50 5 Ta=125℃ 100 85 1.7 75 Ta=25℃ Measured at 1MHZ and Applied Reverse Voltage of 4.0 V.D.C. HS5J 60 1/4 S-S068 Rev. 2.5, 10-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com HS5A THRU HS5M    ■Thermal Characteristics （Ta=25℃ Unless otherwise specified） PARAMETER Thermal Resistance SYMBOL Junction to ambient RθJ-A Junction to lead RθJ-L UNIT HS5A HS5B HS5D HS5F HS5G HS5J HS5K HS5M 471) ℃/W 131) Note(1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.6" x 0.6" (16 mm x 16 mm) copper pad areas ■Ordering Information (Example) PREFERED P/N PACKAGE CODE UNIT WEIGHT(g) MINIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE HS5A~HS5M F1 Approximate 0.254 3000 6000 42000 13” reel ■ Characteristics(Typical) FIG.1: Io-TL Curve FIG.2: Forward Surge Current Capability 175 150 Peak Forward Surge Current (A) 4.0 3.0 2.0 0 . 1 Average Forward Output Current (A) 5.0 1.0 8.3ms Single Half Sine Wave JEDEC Method 100 50 Resistive or Inductive Load P.C.B. Mounted on 0.6"×0.6" (16mm×16mm)Copper Pad Areas 0 0 0 0 1 0 50 150 100 Lead Temperature (℃) 1 2 10 20 100 Number of Cycles FIG.4: Typical Reverse Characteristics FIG.3: Forward Voltage 100 100 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) HS5A-HS5D HS5F-HS5G 10 HS5J-HS5M 1.0 0.1 0.01 0.5 10 1.0 0.1 Ta=25℃ 0.01 0.001 0.7 0.9 1.1 1.3 1.5 1.7 1.9 Ta=125℃ 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) 2/4 S-S068 Rev. 2.5, 10-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com HS5A THRU HS5M    FIG.5: Diagram of circuit and Testing wave form of reverse recovery time 10 Ω NONINDUCTIVE 50 Ω NONINDUCTIVE trr +0.5A (-) (+) DUT 0 PULSE GENERATOR (NOTE2) (-) 1Ω NONINDUCTIV OSCILLOSCOPE (NOTE1) -0.25A (+) NOTES: 1.Rise Time=7ns max .Inpot Impedance=1M Ω 22pf 2.Rise Time=10ns max.Sourse Impedance=50 Ω -1.0A 1cm SET TIME BASE FOR 5/10ns/cm ■ Outline Dimensions DO-214AB(SMC) DO-214AB (SMC) Dim Min Max A 6.60 7.11 B 2.85 3.27 C 5.59 6.22 D 7.75 8.13 E 1.99 2.61 F 0.15 0.31 G 0.76 1.52 H 0.10 0.20 Dimensions in millimeters ■ Suggested pad layout Dim P2 Q1 Typ P1 9.9 P2 3.84 Q1  3.03 Q2  3.82 Q2 P1 Dimensions in millimeters 3/4 S-S068 Rev. 2.5, 10-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com HS5A THRU HS5M    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 4/4 S-S068 Rev. 2.5, 10-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com