MUR1060CD

RoHS MUR1060CD  COMPLIANT   Ultra-Fast Recovery Diodes 5A*2 FRED Pt Pin 2  Features ● Adopt FRED chip ● Low forward Voltage drop ● Fast reverse recovery time ● High frequency operation ● High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ● Guard ring for enhanced ruggedness and long term reliability Typical Applications Pin 1 Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. Pin 3  Mechanical Data ● Package: TO-252 Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant ● Terminals: Tin plated leads, solderable per J-STD002 and JESD22-B102 ● Polarity: As marked ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER MUR1060CD SYMBOL UNIT MUR1060CD Device marking code Repetitive Peak Reverse Voltage VRRM V 600 Average Rectified Output Current @60Hz sine wave, R-load, Tc(FIG.1) Surge(Non-repetitive)Forward Current @60Hz half sine-wave, 1 cycle, Ta=25℃ Current Squared Time @1ms≤t≤8.3ms Tj=25℃， IO A 10 IFSM A 50 I2t A2s 10 Storage Temperature Tstg ℃ -55 ~ +150 Junction Temperature Tj ℃ -55 ~ +150 Junction capacitance @4V,1MHz Cj pF 20 1/5 S-B981 Rev.1.2,27-July-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR1060CD    ■Electrical Characteristics PARAMETER SYMBOL UNIT TEST CONDITIONS IFM=5.0A @Tj=25℃ VFM Instantaneous forward voltage drop per diode Min Typ Max - 1.45 1.6 1.15 1.3 - - 10 - 35 200 - 25 35 - 3.06 - - 5.07 - - 78.88 - - 280 - V IFM=5.0A @Tj=150℃ IRRM1 DC reverse current at rated DC blocking voltage per diode uA IRRM2 Reverse Recovery Time Trr Peak recovery current IRRM ns VRM=VRRM Tj=25℃ VRM=VRRM Tj=150℃ IF=0.5A IRM=1A IRR=0.25A Tj=25℃ Tj=25℃ A Tj=125℃ IF=5A di/dt=-200A/us VRM=200V Tj=25℃ Reverse recovery charge Qrr nC Tj=125℃ ■Thermal Characteristics （Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT MUR1060CD Thermal Resistance Between junction and case RθJ-C ℃/W 5.0 Thermal Resistance Between junction and Air RθJ-A ℃/W 50 ■Ordering Information (Example) PREFERED P/N UNIT WEIGHT(g) MINIIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE MUR1060CD Approximate 0.32 2500 2500 25000 Reel ■Characteristics (Typical) FIG2:Surge Forward Current Capability 70 17.5 Peak Forward Surge Current (A) Average Forward Output Current (A) FIG1:Io -Tc Curve 15.0 12.5 10.0 TC measure point 7.5 5.0 2.5 0 0 50 100 150 60 50 8.3ms Single Half Sine-Wave JEDEC Method 40 30 20 10 200 1 Case Temperature（℃） 2 5 10 20 50 100 Number of Cycles 2/5 S-B981 Rev.1.2,27-July-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR1060CD    FIG .4: Instantaneous Reverse Characteristics FIG3: Forward Voltage 100 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) 40 20 10 5.0 Tj=25℃ Tj=100℃ Tj=125℃ Tj=150℃ 2.0 1.0 0.5 0.2 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Tj=150 ℃ 10 Tj=125 ℃ 1.0 Tj=100 ℃ 0.1 Tj=25 ℃ 0.01 2.0 0 Instantaneous Forward Voltage (V) 20 40 60 80 100 Percent of Rated Peak R everse Voltage (% ) FIG.5: Diagram of circuit and Testing wave form of reverse recovery time 50 Ω NONINDUCTIVE 10 Ω NONINDUCTIVE trr +0.5A (-) (+) DUT 0 PULSE GENERATOR (NOTE2) (-) 1Ω NONINDUCTIVE OSCILLOSCOPE (NOTE1) -0.25A (+) NOTES: 1.Rise Time=7ns max .Inpot Impedance=1M Ω 22pf 2.Rise Time=10ns max.Sourse Impedance=50Ω -1.0A 1cm SET TIME BASE FOR 5/10ns/cm 3/5 S-B981 Rev.1.2,27-July-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR1060CD    ■Outline Dimensions TO-252 TO-252 单位： mm A B J I K C H D E M L F G N Dim Min Max A 6.500 6.700 B C 5.100 5.460 1.400 1.800 D 6.000 6.200 E 10.000 10.400 F 2.166 2.366 G 0.660 0.860 H Ф1.050 Ф1.350 I 0.460 0.580 J 2.200 2.400 K 0 0.300 L 0.890 2.290 M 2.730 3.080 N 0.430 0.580 4/5 S-B981 Rev.1.2,27-July-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR1060CD    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 5/5 S-B981 Rev.1.2,27-July-20 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com