MUR7560PL

RoHS MUR7560PL  COMPLIANT   Ultra-Fast Recovery Rectifier Diodes Features ● High frequency operation ● High surge forward current capability ● High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ● Guard ring for enhanced ruggedness and long term reliability ● Solder dip 275 °C max. 7 s, per JESD 22-B106 Typical Applications Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. Mechanical Data ● Package: TO-247AC Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant ● Terminals: Tin plated leads, solderable per J-STD002 and JESD22-B102 ● Polarity: As marked ■Maximum Ratings (Tj=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT MUR7560PL MUR7560PL Device marking code VRRM V 600 Io A 75 IFSM A 500 I2t A2s. 1037 Storage Temperature Tstg ℃ -55 ~ +175 Junction Temperature Tj ℃ -55 ~ +175 Typical Junction capacitance @4V,1MHz Cj pF 200 Repetitive Peak Reverse Voltage Average Rectified Output Current @60Hz half sinewave, R-load, Tc(FIG.1) Surge(Non-repetitive)Forward Current @60Hz half sine-wave, 1 cycle, Tj=25℃ Current Squared Time @1ms≤t≤8.3ms Tj=25℃ 1/5 S-B2600 Rev.1.1,04-Aug-23 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR7560PL    ■Electrical Characteristics（Tj=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT instantaneous forward voltage drop per diode VFM V uA IRRM2 Reverse Recovery Time Trr Min Typ Max - 2.0 2.75 - - 5.0 - - 200 - 35 50 Tj=25℃ - 60 - Tj=125℃ - 88 - - 3.43 - - 11.74 - Tj=25℃ - 102 - Tj=125℃ - 511 - IFM=75.0A IRRM1 DC reverse current at rated DC blocking voltage per diode TEST CONDITIONS Tj=25℃ VRM=VRRM Tj=25℃ VRM=VRRM Tj=125℃ IF=0.5A IRM=1A IRR=0.25A Tj=25℃ ns Tj=25℃ Peak recovery current IRRM A Tj=125℃ Reverse recovery charge Qrr IF=30A di/dt=-200A/us VRM=400V nC ■Thermal Characteristics （Tj=25℃ Unless otherwise specified） SYMBOL UNIT MUR7560PL Between junction and case RθJ-C ℃/W 0.4 Between junction and Air RθJ-A ℃/W 45 PARAMETER Thermal Resistance ■Ordering Information (Example) PREFERED P/N UNIT WEIGHT(g) MINIIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE MUR7560PL Approximate 6.0 30 360 1800 Tube ■Characteristics (Typical) FIG1:Io -Tc Curve 76.0 FIG2:Surge Forward Current Capability 600 68.0 60.0 52.0 48.0 40.0 32.0 24.0 16.0 8.0 0 8.3ms Single Half Sine-Wave JEDEC Method 500 Peak Forward Surge Current (A) Average Forward Output Current (A)                                   0 50 100 150 Case Temperature（℃） 300 200 100 0 200 2/5 S-B2600 Rev.1.1,04-Aug-23 400 1 2 10 20 100 Number of Cycles Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR7560PL  FIG3: Forward Voltage 80 FIG4: Typical Reverse Characteristics 100 60 Instantaneous Reverse Current (uA) 40 Instantaneous Forward Current (A)                                             20 10 Tj=125 ℃ 5.0 Tj=25 ℃ 2.0 1.0 0.5 Tj=125℃ 10 1.0 0.1 Tj=25℃ 0.2 0.1 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 2.0 2.25 0.01 2.5 0 Instantaneous Forward Voltage (V) 20 40 60 80 Percent of Rated Peak Reverse Voltage (%) 100 FIG.5 Diagram of circuit and Testing wave form of reverse recovery time 10Ω 50Ω +0.5A (-) (+) 0 (-) -0.25A (+) 1Ω =7 =10 . -1.0A =1 Ω 22 Ω 1cm SET TIME BASE FOR 5/10ns/cm                       3/5 S-B2600 Rev.1.1,04-Aug-23 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR7560PL    ■Outline Dimensions TO-247AC Dim Min A 4.80 Max 5.20 A1 A2 2.21 2.61 1.85 2.15 b 1.11 1.36 b2 1.91 2.21 c 0.51 0.75 D 20.70 21.30 D1 16.25 16.85 E 15.50 16.10 E1 13.00 13.60 E2 4.80 5.20 E3 2.30 2.70 e L 10.88BSC 19.62 20.22 L1 - 4.30 φP 3.40 3.80 φP1 - 7.30 S 6.15BSC 4/5 S-B2600 Rev.1.1,04-Aug-23 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com MUR7560PL    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 5/5 S-B2600 Rev.1.1,04-Aug-23 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com