ES2J

YENYO Surface Mount Efficient Fast Recovery Rectifier Voltage Range 50 to 600 V Current 2.0 Ampere SMB/DO-214AA ES2A THRU ES2J Features  Fast switching for high efficiency  Low forward voltage drop  High current capability  Low reverse leakage current  High surge current capability  Glass passivated chip Mechanical Data  Case: Molded plastic SMB/DO-214AA  Epoxy: UL 94V-0 rate flame retardant  Terminals: Solderable per MIL-STD-750 method 2026  Polarity:Color band denotes cathode  Mounting position: Any  Weight: 0.093 gram .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .002(.051) .008(.203) .200(5.08) .220(5.59) .030(0.76) .060(1.52) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTIC Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TA=90 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 2.0 A Maximum DC Reverse Current @TJ=25 C At Rated DC Blocking Voltage @TJ=125 C Maximum Reverse Recovery Time (Note 1) Typical junction Capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range o o o SYMBOL VRRM VRMS VDC IF(AV) ES2A 50 35 50 ES2B 100 70 100 ES2D 200 140 200 2.0 ES2G 400 280 400 ES2J 600 420 600 UNIT V V V A IFSM 60 A VF IR Trr CJ R JA TJ, TSTG 0.9 5.0 100 20 50 55 -55 to + 150 1.25 1.5 V uA uA nS pF o 25 50 CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to ambient. 1/2 R1, APR-10 RATINGS AND CHARACTERISTIC CURVES ES2A THRU ES2J FIG.1 - FORWARD CURRENT DERATING CURVE 2.0 60 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.6 50 40 1.2 30 0.8 20 0.4 60 Hz Resistive or Inductive load 0 0 50 100 o 10 0 150 1 10 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 TJ=125 C o 1.0 ES2A-ES2D ES2G ES2J 10 0.1 1 TJ=25 C o 0.01 0.4 0.6 0.8 1.0 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.2 1.4 1.6 1.8 o 0.1 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R1, APR-10