MUR160B

YENYO Surface Mount Efficient Fast Recovery Rectifier Voltage Range 400 to 600 V Current 1.0 Ampere SMB/DO-214AA MUR140B THRU MUR160B Features  Fast switching for high efficiency  Low forward voltage drop  High current capability  Low reverse leakage current  High surge current capability  Glass passivated chip Mechanical Data  Case: Molded plastic SMB/DO-214AA  Epoxy: UL 94V-0 rate flame retardant  Terminals: Solderable per MIL-STD-750 method 2026  Polarity:Color band denotes cathode  Mounting position: Any  Weight: 0.093 gram .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .002(.051) .008(.203) .200(5.08) .220(5.59) .030(0.76) .060(1.52) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTIC Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TA=135 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward @ 25 C o Voltage @1.0A @ 150 C Maximum DC Reverse Current @TJ=25 C At Rated DC Blocking Voltage @TJ=150 C Maximum Reverse Recovery Time (Note 1) Typical junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range o o o o SYMBOL VRRM VRMS VDC IF(AV) MUR140B 400 280 400 1.0 MUR160B 600 420 600 UNIT V V V A IFSM 35 A VF IR Trr CT R JT TJ, TSTG 1.25 1.05 5.0 150 50 10 15 -55 to + 150 / -55 to + 175 o V uA uA nS pF CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Unit mounted on PC board with 5.0mm2 (0.013mm thick) copper pads as heat sink. 1/2 R1, JUL-11 RATINGS AND CHARACTERISTIC CURVES MUR140B THRU MUR160B FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 40 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.8 30 0.6 20 0.4 0.2 60 Hz Resistive or Inductive load 0 0 50 100 o 10 0 150 1 10 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES Tj=150 C 1.0 o o TJ=150 C 10 o Tj=25 C 0.1 1 0.1 o 0.01 0.4 0.6 0.8 1.0 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.2 1.4 1.6 1.8 o TJ=25 C 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 10 1 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R1, JUL-11