S1G

YENYO Surface Mount Standard Rectifier Voltage Range 50 to 1000 V Current 1.0 Ampere SMA/DO-214AC S1A THRU S1M Features  Low forward voltage drop  High current capability  Low reverse leakage current  High surge current capability  Glass passivated chip  Qualified as per AEC-Q101 Mechanical Data  Case: Molded plastic SMA/DO-214AC  Epoxy: UL 94V-0 rate flame retardant  Terminals: Solderable per MIL-STD-750 method 2026  Polarity:Color band denotes cathode end  Mounting position: Any  Weight: 0.064 gram .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .002(.051) .008(.203) .188(4.80) .208(5.28) .030(0.76) .060(1.52) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTIC Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TA=110 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0 A Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C Typical junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range o o SYMBOL VRRM VRMS VDC I(AV) S1A 50 35 50 S1B 100 70 100 S1D 200 140 200 S1G 400 280 400 1.0 S1J 600 420 600 S1K 800 560 800 S1M 1000 700 1000 UNIT V V V A IFSM 30 A VF IR CJ R JA 1.1 5.0 100 12 75 -55 to +150 85 o V uA uA pF C/W o TJ,TSTG C NOTES : (1) Thermal Resistance junction to ambient. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. 1/2 R3, FEB-11 RATINGS AND CHARACTERISTIC CURVES S1A THRU S1M FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 30 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.8 25 20 0.6 15 0.4 10 0.2 60 Hz Resistive or Inductive load 0 0 50 100 o 5 0 150 1 10 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 o INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125 C 10 1.0 1 0.1 0.1 TJ=25 C o 0.01 0.2 0.4 0.6 0.8 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 1.2 1.4 1.6 o 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 100 S1K-S1M S1A-S1J 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R3, FEB-11