SF5A04

YENYO Glass Passivated Super Fast Recovery Rectifier Voltage Range 50 to 600 V Current 5.0 Ampere TO-220AC .154(3.91) DIA .137(3.50) .057(1.45) .052(1.33) MAX.412(10.5) .185(4.70) .175(4.44) .072(1.82) .062(1.58) .055(1.40) .045(1.14) SF5A01 THRU SF5A06 Features  Fast switching for high efficiency  Low forward voltage drop  High current capability  Low reverse leakage current  High surge current capability Mechanical Data  Case: Molded plastic TO-220AC  Epoxy: UL 94V-0 rate flame retardant  Terminals: Solderable per MIL-STD-202 method 208  Polarity:Color band denotes cathode  Mounting position: Any  Weight: 2.07 grams .128(3.25) .114(2.90) 1 2 .056(1.43) .048(1.22) .037(0.94) .027(0.68) .526(13.35) .508(12.90) .27(6.86) .23(5.84) PIN .638(16.2) .602(15.3) .102(2.60) .088(2.25) 1 2 .025(0.64) .014(0.35) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTIC Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TC=100 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 5.0 A Maximum DC Reverse Current @TJ=25 C At Rated DC Blocking Voltage @TJ=125 C Maximum Reverse Recovery Time (Note 1) Typical junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range o o o SYMBOL SF5A01 VRRM VRMS VDC IF(AV) 50 35 50 SF5A02 100 70 100 SF5A03 200 140 200 SF5A04 300 210 300 SF5A05 400 280 400 SF5A06 UNIT 600 420 600 V V V A 5.0 IFSM 100 A VF IR Trr CJ R JC TJ, TSTG 0.95 10.0 250 35 65 2.2 -55 to +150 1.3 1.7 V uA uA nS pF o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to case. 1/2 R1, JUN-11 RATINGS AND CHARACTERISTIC CURVES SF5A01 THRU SF5A06 FIG.1 - FORWARD CURRENT DERATING CURVE 5 100 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 4 80 3 60 2 40 1 60 Hz Resistive or Inductive load 0 0 50 100 o 20 0 150 1 10 100 CASE TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES SF5A01-SF5A03 10 SF5A04-SF5A05 TJ=125 C 100 o 10 SF5A06 1 1 TJ=25 C o 0.1 0.4 0.6 0.8 1.0 1.2 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.4 1.6 1.8 2.0 o 0.1 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R1, JUN-11