PQ32

PQ Cores,Core Ferrite Manufacturers,Mn-Zn Ferrite Cores,PQ Ferrite Core,Power MnZn ferrite core China Professional Ferrite Core Supplier p PQ CORES Introduce of PQ cores PQ Ferrite Core, one kind of Mn-Zn Ferrite Cores, are designed especially for switched mode power supplies. The design provides an optimized ratio of volume to winding area and surface area. As a result, both maximum inductance and winding area are possible with a minimum core size. The PQ cores thus provide maximum power output with a minimum assembled transformer weight and volume, in addition to taking up a minimum amount of area on the printed circuit board. Assembly with printed circuit bobbins and one piece clamps is simplified. This efficient design provides a more uniform cross-sectional area; thus Power MnZn ferrite core tends to operate with fewer hot spots than with other designs. Advantages of PQ Cores Assemblies As one of specialty Core Ferrite Manufacturers, our PQ Cores posses special advantages as fllows,wide core selection; unique one-piece clamp; minimal wire losses; heavy wire capability; multiple tap capability; consistency and uniformity; compact packaging on PCB easy; low-cost assembly; 12, 14 pin bobbins; easy mounting, etc. Also we have high-tech manufacture than other Core Ferrite Manufacturers. with fewer hot spots than with other designs. PQ Cores,Core Ferrite Manufacturers,Mn-Zn Ferrite Cores,PQ Ferrite Core,Power MnZn ferrite core Advantages of PQ Cores Assemblies As one of specialty Core Ferrite Manufacturers, our PQ Cores posses special advantages as fllows,wide core selection; unique one-piece clamp; minimal wire losses; heavy wire capability; multiple tap capability; consistency and uniformity; compact packaging on PCB easy; low-cost assembly; 12, 14 pin bobbins; easy mounting, etc. Also we have high-tech manufacture than other Core Ferrite Manufacturers. Application of PQ Cores Type PQ20/16 PQ20/16A PQ20/20 PQ20/20A PQ26/20A PQ26/20 PQ26/25 PQ26/25A PQ32/20 PQ32/20A PQ32/30A PQ32/30B PQ35/35 PQ35/35A PQ40/40 PQ40/40A PQ50/50 A 20.5±0.4 20.5±0.4 20.5±0.4 20.5±0.4 26.5±0.45 26.5±0.45 26.5±0.45 26.5±0.45 32.0±0.5 32.0±0.5 32.0±0.5 35.1±0.6 35.1±0.6 40.5±0.9 40.5±0.9 40.5±0.9 50.0±0.9 B 18.0±0.4 18.0±0.4 18.0±0.4 18.0±0.4 22.5±0.45 22.5±0.45 22.5±0.45 22.5±0.45 27.5±0.5 27.5±0.5 27.5±0.5 17.4 +0.1 -0.15 C 8.8±0.2 8.8±0.2 8.8±0.2 8.8±0.2 12.0±0.2 12.0±0.2 12.0±0.2 12.0±0.2 Dimensions(mm) D 14.0±0.4 14.0±0.4 14.0±0.4 14.0±0.4 19.0±0.45 19.0±0.45 19.0±0.45 19.0±0.45 22.0±0.5 22.0±0.5 20.0±0.5 22.0±0.5 26.0±0.5 13.45±0.25 28.0±0.6 28.0±0.6 32.0±0.6 E 5.0 +0.3 -0 5.15±0.15 7.0 +0.3 -0 F 8.0 +0.2 -0 Gmin 12.0 12.0 12.0 12.0 15.5 15.5 15.5 15.5 19.0 19.0 19.0 19.0 23.5 19.0 28.0 28.0 31.5 8.1±0.1 10.2 +0.2 -0 7.15±0.15 5.75±0.15 5.75±0.15 8.05±0.15 8.05±015 5.75±0.15 5.75±0.15 10.5 +0.3 -0 13.45±0.25 13.45±0.25 13.7+0 -0.5 13.45±0.25 22.0±0.5 14.35±0.25 14.9±0.3 14.9±0.3 20.0±0.35 10.65±0.15 12.5±0.15 27.5±0.5 14.75±0.15 14.75±0.15 18.05±0.15 32.0±0.5 32.0±0.5 37.0±0.6 37.0±0.6 20.0±0.35 -0 10.0 +0.1 -0.15 12.5 +0 -0.25 +0.1 12.4 -0.15 10.3 +0.1 -0.15 10.4 +0 -0.25 15.3 +0 -0.3 15.2 +0.1 -0.15 +0 17.5 -0.25 10.1±0.1 9.95 +0.25 10.65±0.15 20.0 +0 19.9 25.0 -0.25 +0.1 -0.15 +0.1 -0.15 PQ Cores,Core Ferrite Manufacturers,Mn-Zn Ferrite Cores,PQ Ferrite Core,Power MnZn ferrite core Core parameter Type Ae C1 Ie (mm-1) (mm2) (mm) PQ20/16 0.605 62.0 37.4 PQ20/16A 0.605 37.4 62.0 PQ20/20 0.738 62.0 45.4 PQ20/20A 0.738 45.4 62.0 PQ26/20 0.391 119 46.3 PQ26/20A 0.391 46.3 119 PQ26/25 0.472 118 55.5 PQ26/25A 0.472 55.5 118 PQ32/20 0.326 170 55.5 PQ32/20A 0.326 170 55.5 PQ32/30A 0.464 161 74.6 PQ32/30B 0.464 74.6 161 PQ35/35 0.448 196 87.9 PQ35/35A 0.448 87.9 196 PQ40/40 0.508 201 102 PQ40/40A 0.508 102 201 PQ50/50 0.346 113 328 Al:1kHz,0.5mA,100Ts Ve (mm3) 2310 2310 2790 2790 5490 5490 6530 6530 9420 9420 12000 12000 17300 17300 20500 20500 37200 weight (g/pr. ) 13 13 15 15 31 31 36 36 42 42 55 55 73 73 95 95 195 AL(nH/N2 ) F2BD F2B1 (±25%) (±25%) 3880 3430 3380 3380 3310 2920 3150 3150 6170 5510 6170 6170 5250 4670 5250 5250 7310 7310 7310 7310 5140 4900 5140 5140 4860 4860 4860 4860 4300 4300 4300 4300 6720 6720 Pc(W) F2BD F2B1 (max.) (max.) 0.35 0.42 0.81 0.99 1.22 1.64 2.20 2.74 5.50 1.16 1.40 2.75 3.27 4.72 6.0 8.7 10.3 11.15* Copyright 2005 YUXIANG Magnetic Materials Ind. Co.,Ltd.All Rights Reserved. Add:16F1,jinyuan building,NO.57,hubin S.Rd.,Xiamen,China.361004 Tel : (86)592 2225286 (86)592 2219816 (86)592 2217138 Fax: (86)592 2207122 Email : yingli@magnets.com.cn yuxiang@sohu.net