CRO2690A-LF

CRO2690A-LF PHASE NOISE (1 Hz BW, typical) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: applications@zcomm.com Rev A1 Applications • Digital Radio Equipment • Fixed Wireless Access • Satellite Communication Systems Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering £(f) (dBc/Hz) Voltage-Controlled Oscillator Surface Mount Module OFFSET (Hz) Performance Specifications Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance Pushing Pulling (14 dB Return Loss, Any Phase) Operating Temperature Range Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) Additional Notes Min 2690 Typ -114 -15 Max 2690 -13 4.5 Units MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz °C 0.5 7 1 4 50 7 50 1 1 -40 MINI-16-SM Min Typ 5 22 85 Max 26 Units Vdc mA LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module Tuning Curve, typ. 2710 CRO2690A-LF Rev A1 FREQUENCY (MHz) 2705 2700 2695 2690 2685 2680 2675 2670 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 85 °C 25 °C -40 °C TUNING VOLTAGE (Vdc) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 7 6 5 4 3 2 1 2676 POWER OUTPUT (dBm) SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 2679 2683 2686 2689 2692 2695 2698 2701 2704 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B