V338ME01-LF_10

V338ME01-LF PHASE NOISE (1 Hz BW, typical) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: applications@zcomm.com Rev A1 Applications • Satellite Modems • Mobile Radios • Test Equipment Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering £(f) (dBc/Hz) Voltage-Controlled Oscillator Surface Mount Module OFFSET (Hz) Performance Specifications Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance Pushing Pulling (14 dB Return Loss, Any Phase) Operating Temperature Range Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) Additional Notes Pin 4 is no connect or ground. Min 338 Typ -110 -13 Max 338 -12 2 Units MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz °C 0 11 0 3 50 6 250 1 1 -40 MINI-16M Min Typ 3.3 17 85 Max 21 Units Vdc mA LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module Tuning Curve, typ. 350 348 346 344 342 340 338 336 334 332 330 328 326 324 322 320 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 V338ME01-LF Rev A1 FREQUENCY (MHz) 85 °C 25 °C -40 °C TUNING VOLTAGE (Vdc) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 6 5 4 3 2 1 0 327 329 332 334 336 339 341 344 346 POWER OUTPUT (dBm) SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 P4 REST Vt RF OUT Vcc MOD GROUND H 0.220 0.130 PACKAGE MINI-16M MINI-16M-L MINI-16M-LOW 0.160 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B