V800ME17-LF_10

V800ME17-LF PHASE NOISE (1 Hz BW, typical) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: applications@zcomm.com Rev A1 Applications • WiMAX • Mobile Communication Systems • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering £(f) (dBc/Hz) Voltage-Controlled Oscillator Surface Mount Module OFFSET (Hz) Performance Specifications Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance Pushing Pulling (14 dB Return Loss, Any Phase) Operating Temperature Range Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) Additional Notes Min 2417 Typ -95 -20 Max 2596 Units MHz dBc/Hz dBc 0.5 96 -2 1.5 50 4.5 5 20 4 2 Vdc MHz/V dBm pF MHz/V MHz °C -20 MINI-14S Min Typ 5 19 70 Max 23 Units Vdc mA LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module Tuning Curve, typ. 2750 2720 2690 2660 2630 2600 2570 2540 2510 2480 2450 2420 2390 2360 2330 2300 2270 2240 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 V800ME17-LF Rev A1 FREQUENCY (MHz) 70 °C 25 °C -20 °C TUNING VOLTAGE (Vdc) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 8 7 6 5 4 3 2 1 0 -1 -2 2277 2333 2381 2429 2477 2523 2572 2625 2674 2721 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. POWER OUTPUT (dBm) 0.030 MIN. CUTBACK FROM LIVE PADS FREQUENCY (MHz) 70 °C 25 °C -20 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE MINI-14S MINI-14S-L H 0.220 0.130 MINI-14S-LOW 0.160 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B