DISPLAYTRONIC
A DIVISION OF ZE XIAMEN CO., LTD.
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
PART NUMBER: DATE:
ACM 1604C SERIES August 9, 1999
ACM1604C SERIES CHARACTER MODULE 1.0 MECHANICAL SPECS
1. Overall Module Size
VER1.0
2. 3. 4. 5. 6. 7. 8. 9.
Dot Size Dot Pitch Duty Controller IC LC Fluid Options Polarizer Options Backlight Options Temperature Range Options
87.0mm(W) x 60.0mm(H) x max 13.5mm(D) for LED backlight version 87.0mm(W) x 60.0mm(H) x max 9.5mm(D) for reflective version 0.55mm(W) x 0.55mm(H) 0.60mm(W) x 0.60mm(H) 1/16 KS0066 TN, STN Reflective, Transflective, Transmissive LED Standard(0ºC ~ 50ºC), Wide(-20ºC ~ 70ºC)
2.0 ABSOLUTE MAXIMUM RATINGS
Item Operating temperature (Standard) Storage temperature (Standard) Operating temperature (Wide temperature) Storage temperature (Wide temperature) Input voltage Supply voltage for logic Supply voltage for LCD drive Symbol Top Tst Top Tst Vin Vdd- Vss Vdd- Vo Min 0 -10 -20 -30 Vss 2.7 3.0 4.6 Typ Max 50 60 70 80 Vdd 5.5 6.5 Unit ºC ºC ºC ºC V V V
3.0 ELECTRICAL CHARACTERISTICS
Item Input voltage (high) Input voltage (low) Recommended LC Driving Voltage (Standard Temp) Symbol Vih Vil Vdd - Vo Condition H level L level 0ºC 25ºC 50ºC -20ºC Recommended LC Driving Voltage (Wide Temp) Vdd -Vo 0ºC 50ºC 70ºC Power Supply Current LED Power Supply Voltage LED Power Supply Current Idd Vfled Ifled Vdd=5.0V, fosc=270kHz R=6.8Ω R=6.8Ω Min 2.2 0 4.2 3.9 3.6 Typ 4.8 4.6 4.3 6.4 4.8 4.3 4.1 0.5 4.1 120 Max Vdd 0.6 5.4 7.2 1.0 4.3 360 mA V mA V V Unit V V
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
1
ACM1604C SERIES CHARACTER MODULE
VER1.0
4.0 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, TN LC fluid)
Item Viewing angle (horizontal) Viewing angle (vertical) Contrast Ratio Response time (rise) Response time (fall) Symbol θ φ Cr Tr Tf Condition Cr ≥ 4.0 Cr ≥ 4.0 φ=0°, θ=0° φ=0°, θ=0° φ=0°, θ=0° Min -25 -30 Typ 2 120 120 Max 30 150 150 ms ms Unit deg deg
4.1 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, STN LC fluid)
Item Viewing angle (horizontal) Viewing angle (vertical) Contrast Ratio Response time (rise) Response time (fall) Symbol θ φ Cr Tr Tf Condition Cr ≥ 2.0 Cr ≥ 2.0 φ=0°, θ=0° φ=0°, θ=0° φ=0°, θ=0° Min -60 -40 Typ 6 150 150 Max 35 40 250 250 ms ms Unit deg deg
5.0 BLOCK DIAGRAM
1. Vss 2. Vdd 3. Vo 4. RS 5. R/W 6. E 7. DB0 8 COM 16 16 COM16 14. DB7
~
U2
SEG1- 40 SEG41- 100 40 SEG 1 COM 1 60
U3
SEG100 -160 60 SEG160
U1
LCD 16X4
+ BL+ BL-
LED BACKLIGHT
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
2
ACM1604C SERIES CHARACTER MODULE 6.0 PIN ASSIGNMENT
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + Symbol Vss Vdd Vo RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 BL+ BLFunction Ground +5V LCD contrast adjust Register select Read / write Enable Data bit 0 Data bit 1 Data bit 2 Data bit 3 Data bit 4 Data bit 5 Data bit 6 Data bit 7 Power Supply for BL+ Power Supply for BLVss Vo Vdd Vss Vo
VER1.0
7.0 POWER SUPPLY
Vdd +5V
Vr
STANDARD TEMP RANGE
Vr -5V
+5V
WIDE TEMP RANGE Vr = 10KΩ ~ 20KΩ
8.0 TIMING CHARACTERISTICS
Item Enable cycle time Enable pulse width Enable rise/fall time RS, R/W set up time RS, R/W hold time Data delay time Data set up time Data hold time Symbol tC tW tR , tF tSU tH tD tDSU tDH Test Condition Fig. a, Fig. b Fig. a, Fig. b Fig. a, Fig. b Fig. a, Fig. b Fig. a, Fig. b Fig. b Fig. a Fig. a, Fig. b Min. 500 220 40 10 60 20 Typ. Max. 25 120 Unit ns ns ns ns ns ns ns ns
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
3
ACM1604C SERIES CHARACTER MODULE
VER1.0
RS R/W E DB0~DB7
VIH1 VIL1 t SU
VIH1 VIL1 tH
V IL1 tW VIH1 VIL1 tR VIH1 VIH1 VIL1 t DSU t DH VIH1 tF tH
VIL1
VIL1
Valid Data
VIL1 tC VIL1
Fig. a Interface timing (data write)
RS R/W
VIH1 VIL1 t SU V IH1
VIH1 VIL1 tH VIH1
tW
tF VIH1 VIL1
tH
E DB0~DB7
VIH1 VIL1 tR tD VIH1 VIL1
t DSU
VIL1 t DH VIH1 VIL1
Valid Data
tC
Fig. b Interface timing (data read)
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
4
ACM1604C SERIES CHARACTER MODULE 9.0 MECHANICAL DIAGRAM
VER1.0
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
5
ACM1604C SERIES CHARACTER MODULE 10.0 RELIABILITY TEST
Evaluations and Assessment* Storage Condition Operation at high temperature and humidity High temperature storage Low temperature storage Content 40ºC,90% RH,240hrs 60ºC, 240hrs -20ºC, 240hrs Current Consumption Twice initial value or less Twice initial value or less Twice initial value or less Oozing none Contrast
VER1.0
Other Appearances No abnormality
More than 80% of initial value More than 80% of initial value More than 80% of initial value
none
No abnormality No abnormality
*Evaluations and assessment to be made two hours after returning to room temperature (25ºC±5ºC). *The LCDs subjected to the test must not have dew condensation.
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
6
ACM1604C SERIES CHARACTER MODULE 11.0 DISPLAY INSTRUCTION TABLE
COMMAND R R/ DB DB DB DB 4 5 SW7 6 DB 3 DB 2 DB 1 DB 0 DESCRIPTION
VER1.0
Executing time fosc=250khz 1.64ms
Clear Display Cursor at Home
0
00
0
0
0
0
0
0
1
Clears Display & Returns to Address 0.
0
00
0
0
0
0
0
1
x
Returns Cursor to Address 0. Also returns the display being shifted to the original position. DDRAM contents remain unchanged. I/D: Set Cursor Moving Direction I/D=1: Increment I/D=0: Decrement S: Specify Shift of Display S=1: The display is shifted S=0: The display is not shifted
1.64ms
Entry Mode Set
0
00
0
0
0
0
1
I/D
S
40µs
Display ON/OFF Control
0
00
0
0
0
1
D
C
B
Display D=1: Display on D=0: Display off Cursor C=1: Cursor on C=0: Cursor off Brink B=1: Brink on B=0: Brink off Moves cursor or shifts the display w/o changing DD RAM contents S/C=0: Cursor Shift (RAM unchanged) S/C=1: Display Shift (RAM unchanged) R/L=1: Shift to the Right R/L=0: Shift to the Left Sets data bus length (DL), # of display lines (N), and character fonts (F). DL=1: 8 bits F=0: 5x7 dots DL=0: 4 bits F=1: 5x10 dots N=0: 1 line display N=1: 2 lines display Sets CG RAM address. CG RAM data is sent and received after this instruction. Sets DD RAM address. DD Ram data is sent and received after this instruction. Reads Busy Flag (BF) and address counter contents.
40µs
Cursor / Display Shift
0
00
0
0
1
S/C
R/L
x
x
40µs
Function Set
0
00
0
1
DL
N
F
x
x
40µs
Set CG RAM Address Set DD RAM Address Busy Flag / Address Read Write Data Read Data x: Don't Care.
0
00
1
Character Generator (CG) RAM Address
40µs
0
01
Display Data (DD) RAM Address / Cursor Address
40µs
0
1B F
Address counter used for both DD & CG RAM address
40µs
1 1
0 1
Write Data Read Data
Writes data into DDRAM or CGRAM. Reads data from DDRAM or CGRAM.
46µs 46µs
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
7
ACM1604C SERIES CHARACTER MODULE 12.0 STANDARD CHARACTER PATTERNS
VER1.0
Note: The character generator RAM is the RAM with which the user can rewrite character patterns by program.
DISPLAYTRONIC
A DIVISION OF ZE XIAMEN
8
很抱歉,暂时无法提供与“ACM1604C”相匹配的价格&库存,您可以联系我们找货
免费人工找货