AT-320240Q6FIQW

A MP I R E SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. APPROVED BY DATE AT-320240Q6FIQW-T83(V)(R) APPROVED BY CHECKED BY ORGANIZED BY Date : 2006/9/12 AMPIRE CO., LTD. 1 RECORD OF REVISION Revision Date Page 2006/9/12 -New Release Contents Editor Tony Date : 2006/9/12 AMPIRE CO., LTD. 2 1 (1) (2) FEATURES Display format : 320 × 240 dot- matrix, 1/240 duty. Construction : FSTN LCD, TAB type LCD driver, white Edge LED backlight, Touch Panel , Touch Panel controller (TSC2046) and PCB. Display type : FSTN ,Transflective , 6 o’clock view. Controller : RA8835. New Driving Method CMOS LCD Driver for Low Power Consumption Driving. 5V or 3.3V single power input. Built- in specific power supplies circuit for LCD driving. Ultra Low Power Consumption. Normal temperature type. Portrait(Default) or Landscape Display Type Selectable by Jumper Setting. 80 or 68 Family MPU Selectable by Jumper Setting ROHS compliant. (3) (4) (5) (6) (7) (8) (9) (10) 2 MECHANICAL DATA Parameter Dot size Dot pitch Viewing area Module size Module size (w/ Touch panel) Stand Value 0.225(W) × 0.225(H) 0.24(W) × 0.24(H) 62.0 (W) × 81.8 (H) 85.0(W) × 99.3(H) × 6.7 max (T) 85.0(W) × 99.3(H) × 8.6 max (T) Unit mm mm mm mm mm 3 ABSOLUTE MAXIMUM RATINGS Parameter Logic Circuit Supply Voltage LCD Driving Voltage Input Voltage Normal. type Operating Temp. Storage Temp. Symbol VDD-VSS -VI TOP TSTG Min - 0.3 -0.3 - 0.3 0 - 20 Max 7.0 28.0 VDD+0.3 50 70 Unit V V V °C °C Date : 2006/9/12 AMPIRE CO., LTD. 3 4 ELECTRO-OPTICAL CHARACTERISTICS Parameter Logic Circuit Supply Voltage LCD Driving Voltage Condition Min Typ Max ----- Electronic Characteristics ----2.7 -5.5 VDD-VSS --0 °C 25 ° C 50 ° C Input Voltage Logic Supply Current Contrast Rise Time Fall Time Viewing Angle Range VIH VIL ICC ---22.7 20.7 19.8 0.7 VDD VSS -22.9 21.8 20.8 -24.1 22.9 21.8 VDD V Symbol Unit V V 0~50 ° C for Normal Temp. type Note -0.3 VDD V T.B.D -mA ----- Optical Characteristics ----CR tr tf θf θb θl θr Frame Frequency Parameter Forward Current fF Symbol IF 25° C Condition -IF=60mA IF=60mA FSTN type 25° C 25° C 25° C & CR≥2 2 --40 25 30 40 -Min ---5 170 380 ----70 Typ 60 2.5 3.2 255 570 -----Max 80 -3.5 Hz Unit mA cd/ m2 V (※) Note Note 4 Note 4 Note 5 Deg. ms ms Note 3(※) Note 1(※) Note 2(※) ----- White LED Back-light Characteristics ----- LCM Luminous intensity (Full White pattern) Forward Voltage VF Note 4: Luminous intensity is decided by forward current of White LED. Note 5: White LEDs are with voltage tolerance. * LED Dice number = 4 A 3.2V/60mA K Please keep the IF between 60~80mA Luminous intensity is decided by IF (※)These data need to be determined. Date : 2006/9/12 AMPIRE CO., LTD. 4 (NOTE 1) Contrast ratio : CR = (Brightness in OFF state) / (Brightness in ON state) ( NOTE 2 ) Response time : (NOTE 3) Viewing angle Touch Panel Electrical Specification Parameter ON Resistance Insulating Resistance Chattering Specification 400 Ω ~ 800 Ω 260 Ω ~ 600 Ω More than 10MΩ Less Than 15 ms Condition X Axis Y Axis DC 25 V 100KΩ Pull- Up Date : 2006/9/12 AMPIRE CO., LTD. 5 5 BLOCK DIAGRAM From MPU FLM /RESET /RD /WR Controller RA8835 /CS A0 DB0~7 LP, M, YDIS COM. Driver LCD Panel 240 320 x 240 Dots 320 SRAM CP,D0~D3 SEG. Driver * Please use the YDIS pin and the inner command of the RA8835 to control Display On/Off. Power Supply Example LCD MODULE New driving method LCD driver VCC VCTL VR 21.8V VSS LCD power circuit 0V Note: VCTL is about 0.4V 6 INTERFACE DEFINITION PIN NO. 1 2 SIGNAL /RESET /RD LEVEL FUNCTION H/L Reset Signal 80 Series: Read Signal H/L 68 Series: Enable Signal(E) Date : 2006/9/12 AMPIRE CO., LTD. 6 3 4 5 6 ~ 13 14 15 16 17 18* 19* 20* 21* 22* 23 24 /WR /CS A0 DB0~DB7 VDD VSS VCTL NC SK / X1 DO / X2 DI / Y1 CS / Y2 INT A K H/L H/L H/L H/L - 80 Series: Write Signal 68 Series: R/W Signal Chip Select Signal Data Type Selection Data Input(8 bits) Power Supply for Logic(+5 or 3.3V) Power Supply(Ground : 0V) Contrast Adjustment Input No Connection Serial Clock Touch Panel Left Signal in X Axis Serial Data Output Touch Panel Right Signal in X Axis Serial Data Input Touch Panel Upper Signal in Y Axis T/P controller Chip Select. Active Low Touch Panel Lower Signal in X Axis Pen Interrupt LED Anode LED Cathode * 18~22 : SK, DO, DI, CS, INT for Touch Panel controller TSC2046 / X1, X2, Y1, Y2 for Touch Panel (without TSC2046) Date : 2006/9/12 AMPIRE CO., LTD. 7 7 TIMING CHARACTERISTICS 7.1 8080 Family Interface Timing Max Unit ns ns ns ns ns ns ns ns Remark A0,/CS /WR,/RD Parameter Condition Symbol Min Address Hold Time tAH8 10 Address Setup Time tAW8 0 System Cycle Time tCYC Note Strobe Pulse Width CL=100 pF tOC 150 VDD=2.7~4.5 Data Setup Time tDS8 120 Data Hold Time tDH8 5 /RD Access Time tACC8 Output Disable Time tOH8 10 Note: For memory control and system control commands: tCYC8=2tC+tOC+tCEA+75 > tACV +245 For all other commands: tCYC8=4tC+tOC+30 80 55 DB0~DB7 A0,/CS /WR,/RD DB0~DB7 (Write) DB0~DB7 (Read) Date : 2006/9/12 AMPIRE CO., LTD. 8 7.2 6800 Family Interface Timing Max Unit ns ns ns ns ns ns ns ns Remark A0,/CS, R/W Parameter Condition Symbol Min System Cycle Time tCYC6 Note Address Setup Time tAW6 10 Address Hold Time tAH6 0 Data Setup Time CL=100 pF tDS6 120 VDD=2.7~4.5 Data Hold Time tDH6 0 Output Disable Time tOH6 10 Access Time tACC6 Enable Pulsewidth tEW 150 Note: For memory control and system control commands: tCYC6=2tC+tEW+tCEA+75 > tACV +245 For all other commands: tCYC6=4tC+tEW+30 75 130 - DB0~DB7 E E R/W A0, /CS DB0~DB7 (Write) DB0~DB7 (Read) AC Electrical Characteristics Date : 2006/9/12 AMPIRE CO., LTD. 9 8 INSTRUCTION SET Code Class Command /RD /WR A0 SYSTEM System SET Control SLEEP IN DISP ON/OFF SCROLL CSRFORM Display CGRAM Control ADDR. CSRDIR HDOT SCR OVLAY Drawing CSRW Control CSRR Memory MWRITE Control MREAD 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 D7 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 0 0 0 0 0 0 0 0 0 0 0 0 0 D4 0 1 1 0 1 1 0 1 1 0 0 0 0 D3 0 0 1 0 1 1 1 1 1 0 0 0 0 0 1 1 0 0 D2 0 0 0 1 1 1 1 D1 0 1 0 0 0 0 D0 0 1 D 0 1 0 4 0 Initialized Device and display 5 3 Enter Standby mode 58, Enable and disable display and 5 9 display flashing 4 4 set Display start address and display regions 5D Set cursor byte Hex Command Description Command read parameters Number of Section byters 8 0 1 10 2 2 0 1 1 2 2 8.2.1 8.2.2 8.3.1 8.3.2 8.3.3 8.3.6 8.3.4 8.3.7 8.3.5 8.4.1 8.4.2 8.5.1 8.5.2 5 C Set start address of character generator RAM CD CD 4C Set direction of cursor to movement 1 0 4F 1 1 1 1 1 1 0 1 0 1 0 1 5A set horizontal scroll position 5 B set display overlay format 4 6 set cursor address 4 7 read cursor address 4 2 write to display memory 4 3 read from display memory Note: 1. In general, the internal registers of the RA8835 are modified as each command parameter is input. However, the microprocessor does not have to set all the parameters of a command and may send a new command before all parameters have been input. The internal registers for the parameters that have been input will have been changed but the remaining parameter registers are unchanged. 2 bytes parameters( where two bytes are treated as 1 data item) are handled as following: a. CSRW, CSRR: Each byte is processed individually. The microprocessor may read or write just the low byte of the cursor address. b. SYSTEM SET, SCROLL, CGRAM ADR. : Both parameter bytes are processed together. If the command is changed after half of the parameter has been input, the single byte is ignored. 2. APL and APH are 2-byte parameters, but are treated as two 1-byte parameters. 3. Please refer to RA8835 LCD Controller Data Book for detail. Date : 2006/9/12 AMPIRE CO., LTD. 10 9 INNER DATA FORMAT COM1 #1 #2 D3 D2 D1 D0 D3 D3 D2 D1 D0 D3 D2 D1 D0 COM240 D3 D2 D1 D0 D3 D2 D1 #320 D0 D2 D1 D0 D2 D1 D0 Portrait Display Type (Top View) /&' 3 R W L RG UU W H DP -3 -3 FXW V R W KU SEG1 #1 D3 D2 D1 D0 D3 D2 D3 D2 SEG320 D1 D0 Date : 2006/9/12 AMPIRE CO., LTD. 11 #2 D3 D2 D1 D0 D3 D2 D3 D2 D1 D0 #240 D3 D2 D1 D0 D3 D2 D3 D2 D1 D0 Landscape Display Type(Top View) / &' $ %& / D G6FD P RG Q SH H -3 -3 FXW V R W KU * Regardless Portrait or Landscape type, both are 1/240 duty. The only difference is the opposite scan direction on Common driver. The character mode of RA8835 could only be used on Landscape type. The character will be Mirrored on Portrait type. 10 JUMPER SETTING Item Display Type MPU Option Portrait (default) Landscape 80 family (default) 68 family Jumper Setting Pin 1,2 short on JP1&JP2 Pin 2,3 short on JP1&JP2 Pin 1,2 short on JP4 Pin 2,3 short on JP4 Remark Date : 2006/9/12 AMPIRE CO., LTD. 12 11 QUALITY AND RELIABILITY 11.1 TEST CONDITIONS Tests should be conducted under the following conditions : Ambient temperature : 25 ± 5° C Humidity : 60 ± 25% RH. 11.2 SAMPLING PLAN Sampling method shall be in accordance with MIL-STD-105E , level II, normal single sampling plan . 11.3 ACCEPTABLE QUALITY LEVEL A major defect is defined as one that could cause failure to or materially reduce the usability of the unit for its intended purpose. A minor defect is one that does not materially reduce the usability of the unit for its intended purpose or is an infringement from established standards and has no significant bearing on its effective use or operation. 11.4 APPEARANCE An appearance test should be conducted by human sight at approximately 30 cm distance from the LCD module under fluorescent light. The inspection area of LCD panel shall be within the range of following limits. Date : 2006/9/12 AMPIRE CO., LTD. 13 11.5 INSPECTION QUALITY CRITERIA Item Function Dimension Black spots Description of defects Short circuit or Pattern cut Deviation from drawings Ave . dia . D area A area B Disregard D≤0.2 3 4 0.2