AZ164-1CT-12A

AZ164 MINIATURE POWER RELAY FEATURES • • • • • • • • PC Terminals SPDT through 4PDT arrangement High switching capacity AC and DC coils Push To Test lever available on some models CE marking UL, CUR file E43203 TÜV pending CONTACTS Arrangement SPDT (1 Form C) DPDT (2 Form C) 3PDT (3 Form C) 4PDT (4 Form C) See chart on page 2 See chart on page 2 -1CT contact -2C and 2CT contact -3C contact -4C contact Silver Silver Silver Silver cadmium oxide cerium cerium cerium GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 2 x 107 operations See UL/CUR ratings on page 2 25 msec max. at nominal coil voltage 25 msec at nominal coil voltage (without suppression) Ratings UL, CUR Material Dielectric Strength 1500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact 1000 Vrms between contact sets Insulation Resistance Dropout 100 megohms min. at 500 VDC, 20°C, 50% RH DC: > 10% of nominal coil voltage AC: > 30% of nominal coil voltage -55°C (-67°F) to 70°C (158°F) -55°C (-67°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 20 g Polycarbonate PC 250°C (482°F) 5 seconds 37 grams Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature DC: 576 mW, 6 to 48 VDC 704 mW, 110 VDC AC: .768 VA DC: 1.2 W (110 V : 1.5 W) at 20°C (68°F) AC: 1.7 VA at 20°C (68°F) 105°C (221°F) Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Weight ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-07-30 Junkersstrasse 3, D-82178 Puchheim, Germany AZ164 CONTACT RATINGS Maximum Ratings SPDT Heavy duty, resistive load: Max. Switched Power: 450 W, 3750 VA Max. Switched Current: 15 A Max. Switched Voltage: 30 VDC, 250 VAC DPDT Heavy duty, resistive load: Max. Switched Power: 300 W, 2500 VA Max. Switched Current: 10 A Max. Switched Voltage: 30 VDC, 250 VAC DPDT Standard duty, resistive load: Max. Switched Power: 210 W, 1750 VA Max. Switched Current: 7 A Max. Switched Voltage: 30 VDC, 250 VAC 3PDT, 4PDT, Standard duty, resistive load: Max. Switched Power: 150 W, 1250 VA Max. Switched Current: 5 A Max. Switched Voltage: 30 VDC, 250 VAC UL/CUR Ratings SPDT Heavy duty: 15 A, 250 VAC 100k, Resistive 15 A, 30 VDC, 100k N.O., 30k N.C., Resistive DPDT Heavy duty: 10 A, 250 VAC, 100k, General use 10 A, 30 VDC, 100k, Resistive 1/3 HP, 120/240 VAC, 100k Motor load DPDT, Standard duty: 7A, 250 VAC, 100k Resistive 7A, 30 VDC, 100k, Resistive 3A, 240 VAC/30 VDC, 100k, General use 3PDT, 4PDT, Standard duty: 5A, 250 VAC, 100k, Resistive 5A, 30 VDC, 100k, Resistive 3A, 240 VAC/30 VDC, 100k, General use MECHANICAL DATA AZ164-_C .039 [1.0] .098 [2.5] AZ164-_CT .059 [1.5] .846 [21.5] .157 [4.0] .846 [21.5] 1.378 [35.0] .157 [4.0] .020 [0.5] .138 [3.5] 1.102 [28.0] 1.378 [35.0] .197 [5.0] .020 [0.5] .138 [3.5] 1.102 [28.0] WIRING DIAGRAM 1 5 9 2 6 10 3 7 11 4 8 12 1 4 7 13 2 5 8 3 6 9 14 1 5 9 13 4 8 12 14 7 1 3 5 2 4 6 Viewed Towards Terminal 1 4 7 2 5 8 3 6 9 1 5 9 4 8 12 1 3 5 2 4 6 1 3 5 2 4 6 1 3 5 2 4 6 1 5 9 2 6 10 3 7 11 4 8 12 13 14 8 7 8 13 14 13 14 13 14 7 8 7 8 4C 4C 3C 2C 2CT 1CT + 3C + 2C + 2CT + 1CT + WITH LED PC BOARD LAYOUTS .169 [4.3] .161 [4.1] Viewed Towards Terminal .226 [5.7] .520 [13.2] .173 [4.4] .169 [4.3] .163 [4.1] .520 [13.2] .161 [4.1] .260 [6.6] .163 [4.1] .169 [4.3] .161 [4.1] .520 [13.2] .163 [4.1] .394 [10.0] .156 [4.0] .181 [4.6] .661 [16.8] .409 [10.4] .661 [16.8] .409 [10.4] .661 [16.8] .409 [10.4] .417 [10.6] .699 [17.75] ø.051 TYP [ø1.3 TYP] ø.051 TYP [ø1.3 TYP] ø.051 TYP [ø1.3 TYP] ø.098 TYP [ø2.5 TYP] .559 [14.2] 4C 3C 2C 1CT & 2CT ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-07-30 Junkersstrasse 3, D-82178 Puchheim, Germany AZ164 RELAY ORDERING DATA STANDARD RELAYS: DC Coil COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 110 Must Operate VDC 4.0 4.8 9.6 19.2 38.4 88.0 Max. Continuous VDC 5.5 6.6 13.2 26.4 52.8 121.0 Nominal Current mA ± 10% 181.0 150.0 75.0 36.9 18.5 10.0 Coil Resistance Ohm 27.5 ± 10% 40.0 ± 10% 160 650 2600 11,000 ± 10% ± 10% ± 15% ± 15% ORDER NUMBER* AZ164–2C–5D AZ164–2C–6D AZ164–2C–12D AZ164–2C–24D AZ164–2C–48D AZ164–2C–110D STANDARD RELAYS: AC Coil (50/60 Hz) COIL SPECIFICATIONS Nominal Coil VAC 6 12 24 48 120 220 240 Must Operate VAC 4.8 9.6 19.2 38.4 96.0 176.0 192.0 Max. Continuous VAC 7.1 14.3 28.6 57.1 143.0 261.0 288.0 Nominal Current mA ± 10% 200.0 100.0 50.0 25.0 10.0 5.5 5.0 Coil Resistance Ohm 11.5 ± 10% 46.0 ± 10% 184 735 4,550 14,400 22,000 ± 10% ± 10% ± 10% ± 15% ± 15% ORDER NUMBER* AZ164–2C–6A AZ164–2C–12A AZ164–2C–24A AZ164–2C–48A AZ164–2C–120A AZ164–2C–220A AZ164–2C–240A * For 3PDT or 4PDT substitute “-3C” or “-4C” for “-2C”. For LED add “1” to the end of p/n. “-2C” and “-4C” versions are available with a lockable “push to test” lever. Add suffix “P” to part number for “Push to Test” lever. RELAY ORDERING DATA HEAVY DUTY RELAYS: DC Coil COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 110 Must Operate VDC 4.0 4.8 9.6 19.2 38.4 88.0 Max. Continuous VDC 5.5 6.6 13.2 26.4 52.8 121.0 Nominal Current mA ± 10% 181.0 150.0 75.0 36.9 18.5 10.0 Coil Resistance Ohm 27.5 ± 10% 40.0 ± 10% 160 650 2600 11,000 ± 10% ± 10% ± 15% ± 15% ORDER NUMBER* AZ164–1CT–5D AZ164–1CT–6D AZ164–1CT–12D AZ164–1CT–24D AZ164–1CT–48D AZ164–1CT–110D HEAVY DUTY RELAYS: AC Coil (50/60 Hz) COIL SPECIFICATIONS Nominal Coil VAC 6 12 24 48 120 220 240 Must Operate VAC 4.8 9.6 19.2 38.4 96.0 176.0 192.0 Max. Continuous VAC 7.1 14.3 28.6 57.1 143.0 261.0 288.0 Nominal Current mA ± 10% 200.0 100.0 50.0 25.0 10.0 5.5 5.0 Coil Resistance Ohm 11.5 ± 10% 46.0 ± 10% 184 735 4,550 14,400 22,000 ± 10% ± 10% ± 10% ± 15% ± 15% ORDER NUMBER* AZ164–1CT–6A AZ164–1CT–12A AZ164–1CT–24A AZ164–1CT–48A AZ164–1CT–120A AZ164–1CT–220A AZ164–1CT–240A * For DPDT substitute “-2CT” for “-1CT”. For LED add “1” to the end of p/n. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-07-30 Junkersstrasse 3, D-82178 Puchheim, Germany