AZ169-2C-100D

AZ169-2C-100D

  • 厂商:

    ZETTLER(赛特勒)

  • 封装:

  • 描述:

    AZ169-2C-100D - MINIATURE POWER RELAY - ZETTLER Electronics

  • 详情介绍
  • 数据手册
  • 价格&库存
AZ169-2C-100D 数据手册
AZ169 MINIATURE POWER RELAY FEATURES • • • • • • 10 A switching DPDT or 3PDT arrangement High switching capacity AC and DC coils Push To Test lever UL, CUR file E44211 CONTACTS Arrangement Ratings DPDT (2 Form C) 3PDT (3 Form C) Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 30 VDC* or 250 VAC * Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 1 x 107 operations 1 x 105 operations 25 ms max. at nominal coil voltage 25 ms max. at nominal coil voltage (without suppression) special precautions must be taken. Please contact the factory. Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 2000 Vrms between contact sets Insulation Resistance Insulation (according to DIN VDE 0110, IEC 60664-1) Dropout DC coils AC coils Ambient Temperature Operating Storage 500 megohms min. at 500 VDC, 20°C, 50% RH C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC Greater than 10% of nominal coil voltage Greater than 30% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) - DC coils -40°C (-40°F) to 55°C (131°F) - AC coils -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 10 g Polycarbonate Octal or Undecal Type Plug 85 grams 10 per small carton / 100 per carton box UL, CUR 10A at 250 VAC 30VDC 1/3 HP at 240 VAC 1/3 HP at 120 VAC 1/2 HP at 277 VAC Silver tin oxide or silver cadmium oxide, gold plated versions are available < 100 milliohms initially Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature DC: 1.0 W AC: 2.0 VA DC: 2.2 W at 20°C (68°F) AC: 3.5 VA at 20°C (68°F) 105°C (221°F) Vibration Shock Enclosure Terminals Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Packing unit in pcs ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2006-02-03 Junkersstrasse 3, D-82178 Puchheim, Germany AZ169 RELAY ORDERING DATA COIL SPECIFICATIONS: Nominal Coil VDC 6 12 24 48 60 100 110 DC Coil Max. Continuous VDC 7.2 14.4 28.8 57.6 72.0 120.0 132.0 Nominal Current mA ± 10% 255.3 126.3 55.8 36.9 31.3 14.7 15.1 Coil Resistance Ohm ± 10% 23.5 95 430 1,630 1,920 6,800 7,300 Must Operate VDC 4.8 9.6 19.2 38.4 48.0 80.0 88.0 ORDER NUMBER* AZ169–2C–6D AZ169–2C–12D AZ169–2C–24D AZ169–2C–48D AZ169–2C–60D AZ169–2C–100D AZ169–2C–110D COIL SPECIFICATIONS AC Coil (50/60 Hz) Nominal Coil VAC 6 12 24 48 120 230 Must Operate VAC 4.8 9.6 19.2 38.4 88.0 176.0 Max. Continuous VAC 7.2 14.4 28.8 57.6 132.0 264.0 Nominal Current mA ± 10% 450.0 225.0 112.5 56.3 22.5 11.7 Coil Resistance Ohm ± 10% 3.9 16.3 70 315 1,600 6,800 ORDER NUMBER* AZ169–2C–6A AZ169–2C–12A AZ169–2C–24A AZ169–2C–48A AZ169–2C–120A AZ169–2C–230A * For 3PDT substitute “-3C” for “-2C”. Add suffix “E” to “-2C” or “-3C” to indicate silver tin oxide contacts. Add suffix “1” for LED at the end of part number. Add suffix “P” for “Push to Test” lever at the end of part number. Add sufffix “A” for gold plated contacts at the end of part number. MECHANICAL DATA WIRING DIAGRAMS 2 Form C 3 Form C 2 Form C 2 Form C (with LED) 3 Form C 3 Form C (with LED) Dimensions in mm. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2006-02-03 Junkersstrasse 3, D-82178 Puchheim, Germany
AZ169-2C-100D
物料型号: - AZ169-2C-6D - AZ169-2C-12D - AZ169-2C-24D - AZ169-2C-48D - AZ169-2C-60D - AZ169-2C-100D - AZ169-2C-110D - AZ169-2C-6A - AZ169-2C-12A - AZ169-2C-24A - AZ169-2C-48A - AZ169-2C-120A - AZ169-2C-230A

器件简介: AZ169MINIATURE POWER RELAY是一款小型功率继电器,具有10A的开关能力,DPDT或3PDT的配置,高开关容量,适用于交流和直流线圈,带有Push To Test杠杆,并且符合UL, CUR文件E44211。

引脚分配: - DPDT (2 Form C) 和 3PDT (3 Form C)两种配置。

参数特性: - 电阻负载:最大300W或2500VA,最大电流10A,最大电压30VDC或250VAC。 - 材料:银锡氧化物或银镉氧化物,提供镀金版本。 - 初始电阻:小于100毫欧姆。 - 线圈功率:在接通电压下DC为1.0W,AC为2.0VA。 - 最大连续功率:DC在20°C时为2.2W。 - 消耗:AC在20°C时为3.5VA。 - 线圈温度:105°C。 - 机械电气寿命:至少1x10^7次操作和1x10^5次操作。 - 操作时间:在额定线圈电压下最大25ms。 - 释放时间:在额定线圈电压下最大25ms(无抑制)。 - 耐压:线圈到接触2500Vrms,接触组间2000Vrms。 - 绝缘电阻:在500VDC、20°C、50%RH下至少500兆欧姆。 - 绝缘:根据DIN VDE 0110、IEC60664-1标准,C250过电压类别:Il污染度:3额定电压:250VAC。 - 存储操作:DC线圈-40°C至70°C,AC线圈-40°C至105°C。 - 振动:10-55Hz下0.062"(1.5mm)DA。 - 冲击:10g。 - 外壳:聚碳酸酯。 - 端子:八路或十一路型插头。 - 重量:85克。 - 包装单位:每小箱10个,每箱100个。

功能详解: 该继电器可以用于需要高开关容量和多种配置(DPDT或3PDT)的应用场合,适用于交流和直流线圈,具有Push To Test功能,方便测试。

应用信息: 适用于需要高开关容量和多种配置的应用场合,如工业控制、家用电器等。

封装信息: - 尺寸:10.75+0.25mm。 - 外壳材料:聚碳酸酯。
AZ169-2C-100D 价格&库存

很抱歉,暂时无法提供与“AZ169-2C-100D”相匹配的价格&库存,您可以联系我们找货

免费人工找货