AZ2150-1A-6DE

AZ2150 MINIATURE POWER RELAY FEATURES • 30 Amp switching capability for both N.O. and N.C. contacts • 1 Form A, B and C contacts available • DC coils to 120 VDC • Life expectancy to 10 million operations • Class B insulation standard • Class F (155°C) version available • Available with an epoxy seal for automatic wave soldering and immersion cleaning • Proof Tracking Index (PTI/CTI) 175 • UL, CUR file E44211 including versions meeting UL 508 and UL 873 spacing and contact rating requirements; VDE 132710 ÜG (some models) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (max.) Release Time (max.) Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. (N.O.) Max. 12 ms Typical: 8 ms Max. 5 ms Typical: 3.5 ms CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A and 1 Form B) Resistive load: Max. switched power: 900 W or 7200 VA Max. switched current: 30 A Max. switched voltage: 30 VDC or 300 VAC UL Rating: See chart for UL contact ratings. AZ2150 Series meets UL 508 Group A spacing and UL 873 refrigeration and safety control requirements. AZ2151 Series meets UL 508 Group B spacing requirements. VDE Rating: AZ2150-1A - 25 A at 250 VAC, 1 x 104, resistive AZ2150-1C - 20 A at 250 VAC, 1 x 104, resistive Material Resistance Silver cadmium oxide < 20 milliohms initially (at rated current, voltage drop method) Dielectric Strength 2500 Vrms contact to coil (at sea level for 1 min.) 1500 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time 1000 megohms min. at 500 VDC, 20°C 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -55°C (-67°F) to 85°C (185°F) -55°C (-67°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 20 g P.B.T. polyester Tinned copper alloy 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 25 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 500 mW 2.2 W at 20°C (68°F) ambient 1.8 W at 40°C (104°F) ambient 43°C (77°F) at nominal coil voltage Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Weight NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed relays should not be dip cleaned. Other coil resistances and sensitivities available upon request. Please call the factory. 5. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-03-12 Junkersstrasse 3, D-82178 Puchheim, Germany AZ2150 RELAY ORDERING DATA STANDARD RELAYS: 1 Form A (SPST); 508 Group A; UL 873 Version COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC Max. Continuous VDC Coil Resistance ±10% Must Operate VDC Unsealed Sealed Maximum Switching Capacity 30 20 5 6 9 12 15 18 24 48 70 110 7.3 8.9 13.9 17.5 22.5 27.4 36.1 68.4 104.4 163.2 27 40 97 155 256 380 660 2,560 5,500 13,450 3.75 4.5 6.75 9.0 11.25 13.5 18.0 36.0 52.5 82.5 AZ2150–1A–5D AZ2150–1A–6D AZ2150–1A–9D AZ2150–1A–12D AZ2150–1A–15D AZ2150–1A–18D AZ2150–1A–24D AZ2150–1A–48D AZ2150–1A–70D AZ2150–1A–110D AZ2150–1A–5DE AZ2150–1A–6DE AZ2150–1A–9DE AZ2150–1A–12DE AZ2150–1A–15DE AZ2150–1A–18DE AZ2150–1A–24DE AZ2150–1A–48DE AZ2150–1A–70DE AZ2150–1A–110DE 10 8 AMPERES 6 5 4 3 2 DC RESISTIVE LOAD AC RESISTIVE LOAD 1 10 20 30 40 60 80 100 200 300 VOLTAGE STANDARD RELAYS: 1 Form A (SPST); UL 508 Group B Version COIL SPECIFICATIONS ORDER NUMBER* 5 6 9 12 15 18 24 48 70 110 7.3 8.9 13.9 17.5 22.5 27.4 36.1 68.4 104.4 163.2 27 40 97 155 256 380 660 2,560 5,500 13,450 3.75 4.5 6.75 9.0 11.25 13.5 18.0 36.0 52.5 82.5 AZ2151–1A–5D AZ2151–1A–6D AZ2151–1A–9D AZ2151–1A–12D AZ2151–1A–15D AZ2151–1A–18D AZ2151–1A–24D AZ2151–1A–48D AZ2151–1A–70D AZ2151–1A–110D AZ2151–1A–5DE Coil Temperature Rise AZ2151–1A–6DE 180 AZ2151–1A–9DE 160 AZ2151–1A–12DE 140 AZ2151–1A–15DE 120 AZ2151–1A–18DE 100 AZ2151–1A–24DE 80 30A AZ2151–1A–48DE 60 25A AZ2151–1A–70DE 40 20A 15A AZ2151–1A–110DE 20 0A Coil Temperature Rise ˚C 0 40% 60% 80% 100% 120% 140% 160% 180% 200% * Substitute “1B” or “1C” in place of the “1A” to indicate 1 Form B and 1 Form C respectively.To indicate Class F version, add suffix “F”. Percent of Nominal Coil Voltage (at 20˚C) UL/CUR File E44211 Approved Contact Ratings Load Type General Purpose (Inductive) Resistive MECHANICAL DATA Cycles 100,000 30,000 100,000 100,000 100,000 100,000 6,000 30,000 30,000 100,000 6,000 6,000 30,000 100,000 Volts 125 or 240 VAC 277 VAC 125 or 240 VAC 30 VDC 277 VAC 240 VAC 277 VAC 125 VAC 240 VAC 125 or 277 VAC 125 VAC 240 VAC 125 VAC 125 or 277 VAC 125 VAC 125 VAC 240 VAC 277 VAC Form A (NO) 30 A 30 A 30 A 20 A 20 A 15 A 6A 800 VA 690 VA 690 VA 1 HP 2 HP 1 HP 3/ HP 4 Form B (NC) 15 A 30 A 15 A 10 A — — 3A 275 VA 275 VA — 1/ HP 4 1 HP — — Form C NO NC — 30 A — 20 A — — 6A 470 VA 470 VA 690 VA 1 HP 2 HP 1 HP 3/ HP 4 15 A 30 A — 10 A — — 3A 275 VA 275 VA — 1/ HP 4 1 HP — — 33 LRA 10 FLA — — 33 LRA 10 FLA — — 3A 3A — — TV–3 TV–3 .020 .130 + .010 – 0.51 (3.3 + 0.25) – .200 (5.1) .110 (2.8) .045 x .045 (1.14 x 1.14) .690 (17.5) 1.25 (31.80) .500 (12.7) Ballast Pilot Duty .090 (2.3) 1.06 (26.9) .196 (5.0) .751 (19.1) .032 x .062 (0.81 x 1.57) .025 x .025 (0.63 x 0.63) PC BOARD LAYOUT Viewed toward terminals .081 x .003 (2.06 x .076) DIA (4 PLACES) 1.00 (25.38) .900 (22.86) .043 x .003 (1.09 x .076) .150 (3.8) .350 (8.9) .550 (14.0) .700 (17.8) Terminal Eliminated on AZ2150 Versions WIRING DIAGRAM Viewed toward terminals AZ2150 VERSION Motor Load .400 .300 (10.2) (7.6) Definite Purpose (LRA-Locked Rotor) (FLA-Full Load) 30,000 100,000 30,000 100,000 6,000 125 VAC 6,000 240 VAC 6,000 120 VAC 6,000 240 VAC TV–5 25,000 120 VAC TV–3 25,000 120 VAC Note: See AZ2100 Data Sheet for more complete Tungsten 96 LRA 33 LRA 60 LRA 30 FLA 10 FLA 20 FLA 82.8 LRA — 82.8 LRA 27 FLA — 27 FLA 80 LRA 33 LRA 60 LRA 30 FLA 10 FLA 20 FLA 60 LRA — 60 LRA 20 FLA — 20 FLA 15 A — 15 A 5A — 5A — 3A — — 3A — TV–5 — TV–5 — TV–3 — UL and CUR approved contact ratings. 1 FORM A (SPST-NO) 1 FORM B (SPST-NC) 1 FORM C (SPDT) AZ2151 VERSION 1 FORM A (SPST-NO) 1 FORM B (SPST-NC) 1 FORM C (SPDT) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-03-12 Junkersstrasse 3, D-82178 Puchheim, Germany