AZ6991-1A-48D

AZ6991 SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • • • • Extremely small (5mm) 6 Amp switching capability High sensitivity, 95 mW pickup Dielectric strength 4000 Vrms contact to coil Isolation spacing greater than 8 mm Reinforced insulation, EN 60730-1 (VDE 0631, part 1) EN 60335-1 (VDE 0700, part 1) Coils up to 60 VDC Epoxy sealed version available UL, CUR file E43203 VDE file 40020561 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 180 W or 1500 VA Max. switched current: 6 A Max. switched voltage: 150 VDC* or 400 VAC * Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 X 107 operations 1 X 105 at 5 A, 250 VAC 5 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Rated Load UL, CUR Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 4000 Vrms contact to coil 6000 V surge, contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (158°F) -40°C (-40°F) to 105°C (221°F) 1 mm DA at 10–500 Hz 5g P.B.T. polyester 94V-0 Tinned copper alloy, P.C. 260°C (500°F) 5 seconds 80°C (176°F) 30 seconds 6 grams 20 per plastic tube / 1000 per carton box 6 A at 277 VAC resistive 6 A at 30 VDC resistive R300 Pilot Duty 6 A at 6 A at 250 VAC resistive 30 VDC resistive VDE Material Resistance Silver nickel, gold plating available < 50 milliohms initially COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 95 mW 0.9 W at 20°C (68°F) ambient Terminals Max. Solder Temp. Max. Solder Time 20°C (36°F) at nominal coil voltage Max. 105°C (221°F) Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 4. Specifications subject to change without notice. Packing unit in pcs ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2007-04-19 Junkersstrasse 3, D-82178 Puchheim, Germany AZ6991 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 12 24 48 Must Operate VDC 3.75 9.0 18.0 36.0 Max. Continuous VDC 11.2 26.8 53.7 100.0 Coil Resistance Ôhm ± 10% 147 848 3,390 (±15%) 10,600 (±15%) 16,600 (±15%) 1 Form A AZ6991–1A–5D AZ6991–1A–12D AZ6991–1A–24D AZ6991–1A–48D AZ6991–1A–60D ORDER NUMBER* 1 Form C AZ6991–1C–5D AZ6991–1C–12D AZ6991–1C–24D AZ6991–1C–48D AZ6991–1C–60D 60 45.0 120.0 * Add suffix “E” at the end of order number for sealed version. Add suffix “A” at the end of order number for gold plated contacts. Add suffix “H” at the end of order number for horizontal mounting. MECHANICAL DATA PC BOARD LAYOUT 1.102 [28.0] .197 [5.0] .148 [3.75] .591 [15.0] .020 [0.5] 2 x ø .039 [ø 1.0] 5 x .138 [3.5] 2 x .02 [0.5] 3 x .039 [1.0] 5 x .02 [0.5] .466 [11.34] .197 [5.0] .197 [5.0] .075 [1.9] .075 [1.9] .602 [15.3] .047 [1.2] 3 x ø .051 [ø 1.3] Vertical Mount Vertical Mount Horizontal Mount Note: Mounting hole diameters and center to center dimensions are the same for both vertical and horizontal mounting version 1.102 [28.0] .050 [1.26] .610 [15.5] .591 [15.0] WIRING DIAGRAM .197 [5.0] Form A 12 4 5 12 Form A 4 5 5 x .118 [3.0] 2x .02 [0.5] 3 x .039 [1.0] 5 x .02 [0.5] Form C 12 12 3 4 5 Form C 3 4 5 Horizontal Mount Vertical Mount Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Horizontal Mount ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2007-04-19 Junkersstrasse 3, D-82178 Puchheim, Germany