AZ733W-2A-6DE

AZ733W DPST MINIATURE POWER RELAY FEATURES • • • • • • • Dielectric strength 5000 Vrms 1.5 mm contact gap Epoxy sealed version available 10 Amp switching — double pole contacts Isolation spacing greater than 8 mm UL, CUR file E44211 TÜV file R9659062 CONTACTS Arrangement Ratings DPST (2 Form A) Resistive load: Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 150 VDC* or 400 VAC * Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 5 x 105 1 x 105 at 10 A 250 VAC Res. 10 ms at nominal coil voltage 4 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Rated Load UL, CUR 10 A at 250 VAC general use 100k cycles [1] [2] [3] TV-3 at 125 VAC [1] 10 A at 30 VDC resistive, 100k cycles [1] [2] [3] 10 A at 250 VAC resistive, 100k cycles [1] [2] [3] Silver cadmium oxide [1], silver tin oxide [2] or silver nickel [3] < 50 milliohms initially Dielectric Strength 5000 Vrms contact to coil (at sea level for 1 min.) 3000 Vrms between open contacts 3000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage at nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 18 grams 50 per plastic tray / 500 per carton box TÜV Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 450 mW 2.0 W at 20°C (68°F) ambient 40°C (83°F) at nominal coil voltage Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. 130°C (266°F) Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Packing unit in pcs ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2005-02-16 Junkersstrasse 3, D-82178 Puchheim, Germany AZ733W RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 60 110 Must Operate VDC 2.25 3.8 4.5 6.8 9.0 13.5 18.0 36.0 45.0 82.5 Max. Continuous VDC 4.7 7.9 9.5 14.2 18.9 28.4 37.9 75.9 94.8 183.3 Coil Resistance Ohm 11.3 ±10% 31 45 101 180 405 720 2,880 4,500 16,800 ±10% ±10% ±10% ±10% ±10% ±15% ±15% ±15% ±15% ORDER NUMBER Unsealed AZ733W–2A–3D AZ733W–2A–5D AZ733W–2A–6D AZ733W–2A–9D AZ733W–2A–12D AZ733W–2A–18D AZ733W–2A–24D AZ733W–2A–48D AZ733W–2A–60D AZ733W–2A–110D Sealed AZ733W–2A–3DE AZ733W–2A–5DE AZ733W–2A–6DE AZ733W–2A–9DE AZ733W–2A–12DE AZ733W–2A–18DE AZ733W–2A–24DE AZ733W–2A–48DE AZ733W–2A–60DE AZ733W–2A–110DE * Add suffix “B” to “2A” for silver nickel contacts. Add suffix “E” to “2A” for silver tin oxide contacts. MECHANICAL DATA PC BOARD LAYOUT .787 (20.0) .197 (5) 1.14 (29) .160 ± .015 (4.2 ± .4) .51 (13) 1.02 (25.9) .295 (7.5) 0.015 (0.38) .08 (2.1) 6 x ø .05 [ø 1.3] Viewed toward terminals WIRING DIAGRAM Terminal No. Dimensions Tol.: ± 0.005 (0.13) 1,4,5,8 0.018 (0.457) x 0.038 (0.965) 3,6 0.011 (0.279) x 0.038 (0.965) 1 8 3 6 4 5 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2005-02-16 Junkersstrasse 3, D-82178 Puchheim, Germany