AZ7709-1AE-12DE

AZ7709 SPDT SUBMINIATURE POWER RELAY FEATURES • 4 kV dielectric strength • Proof tracking index (PTI/CTI) 250 • 5 Amp switching capability (version “T” 10 Amp) • Epoxy sealed version available • Class F insulation available • UL, CUR file E365652 • TUV B0887930007 CONTACTS Arrangement SPST (1 Form A) Resistive load: Ratings Max. switched power: 150W or 1250VA (Version “T”: 300W or 2500VA) Max. switched current: 5A (Version “T”: 10A) Max. switched voltage: 30VDC* or 250VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR TUV Material Resistance Standard Coil 5A at 250VAC, resistive, 100k cycles 85°C 5A at 30VDC, resistive, 100k cycles 85°C 1/6HP at 125/250 VAC, 100k cycles 85°C Sensitive Coil 3A at 250VAC, Res. 100k cycles 85°C 3A at 30VDC, Res. 100k cycles 85°C High capacity version “T” Standard Coil 10A at 250VAC, Res. 100k cycles 85°C 10A at 30VDC, Res. 100k cycles 85°C 1/6HP at 125/250 VAC, 100k cycles 85°C TV5 at 120VAC, 25k cycles 25°C Silver tin contacts only Sensitive Coil 8A at 250VAC, 85°C, 100k cycles 8A at 30VDC, Res. 100k cycles 85°C Standard Coil 5A at 250VAC/ 30VDC, Res., 100k cycles 85°C 10A at 250VAC/ 30VDC, Res., 100k cycles 85°C ( "T Ver.) Sensitive Coil 3A at 250VAC/ 30VDC, Res. 100k cycles 85°C 8A at 250VAC/ 30VDC, Res., 100k cycles 85°C ( "T Ver.) (All TUV ratings 105°C Class F only) Silver cadmium oxide, Silver alloy (UL only), Silver tin oxide, gold plating available (UL/TUV only) < 100 milliohms initially (at 6V,1A,voltage drop method) NOTES 1. All values at 20°C (68°F) 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 Operate Time (max.) 8ms at nominal coil voltage Release Time (max.) 4msat nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 4000 Vrms coil to contact 1000 Vrms between open ontacts Insulation Resistance 1000 MΩ min. at 20°C, 500VDC, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) Class F only Storage Enclosure -40°C (-40°F) to 105°C (221°F) P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight (approx.) 6 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 220 mW (standard coil) 113 mW (sensitive coil) 760 mW at 20°C (68°F) ambient 41°C (74°F) at nominal coil voltage, standard 22°C (40°F) at nominal coil voltage, sensitive Max. 105°C (221°F) Standard Max. 155°C (311°F) available 10/12/19 AZ7709 RELAY ORDERING DATA STANDARD COIL COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC Max. Continuous VDC ORDER NUMBER* Coil Resistance Ohm Form A (SPST) 3 2.1 3.9 20 ± 10% AZ7709-1A-3D 5 3.5 6.5 55 ± 10% AZ7709-1A-5D 6 4.2 7.8 80 ± 10% AZ7709-1A-6D 9 6.3 11.7 180 ± 10% AZ7709-1A-9D 12 8.4 15.6 320 ± 10% AZ7709-1A-12D 18 12.6 23.4 720 ± 10% AZ7709-1A-18D 24 16.8 31.2 1,280 ± 10% AZ7709-1A-24D 48 33.6 62.4 5,120 ± 15% AZ7709-1A-48D SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC Max. Continuous VDC ORDER NUMBER* Coil Resistance Ohm ± 10% Form A (SPST) 3 2.25 3.9 45 ± 10% AZ7709-1A-3DS 5 3.75 6.5 125 ± 10% AZ7709-1A-5DS 6 4.50 7.8 180 ± 10% AZ7709-1A-6DS 9 6.75 11.7 400 ± 10% AZ7709-1A-9DS 12 9.00 15.6 720 ± 10% AZ7709-1A-12DS 18 13.50 23.4 1,620 ± 10% AZ7709-1A-18DS 24 18.00 31.2 2,800 ± 10% AZ7709-1A-24DS * Standard contact material Silver cadmium oxide contacts. Substitute “AZ7709T” in place of “AZ7709” for high capacity version. Substitute "1AB" in place of "1A" for Silver alloy contacts. (UL only) Substitute "1AE" in place of "1A" for Silver tin oxide contacts. Add suffix “E” at the end of order number for sealed version. Add suffix “G” at the end of order number for gold plated contacts. (UL/TUV only) Add suffix "F" at the end of the model number for Class F 155°C Version. 10/12/19