AZ8P1-1CH-3DE

AZ8P 10 A MINIATURE POWER RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • Dielectric strength 4000 Vrms Clearance and creepage distance >3.5 mm Tracking index CTI 250 Single coil latching Epoxy sealed 7 Amp switching 10 Amp version (1 Form A only) available UL, CUR file E43203 GENERAL DATA SPDT (1 Form C) SPST (1 Form A) 10 A version only Resistive load: Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 220 VDC* or 300 VAC Max. switched power: 170 W or 1750 VA Max. switched current: 7A Max. switched voltage: 220 VDC* or 300 VAC * Note: If switching voltage is greater than 30 VDC, ZETTLER CH-24DE AZ8P1-1 CONTACTS Arrangement Ratings Form A Life Expectancy Mechanical Electrical Form A Form C Set Time (typical) Reset Time (typical) Minimum operations 2 x 107 1 x 105 at 10 A, 250 VAC 1 x 105 at 5 A, 250 VAC 5 ms at nominal coil voltage Recommended coil pulse: 20 ms 6 ms at reset voltage Recommended coil pulse: 20 ms Form C special precautions must be taken. Please contact the factory Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Surge Voltage Coil to contact Insulation Resistance Ambient Temperature Operating Storage Vibration Shock Enclosure 5,000V (at 1.2x50 µs) 1000 megohms min. at 20°C, 500 VDC, 50% RH At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" DA at 10–55 Hz, 10 g at 10–50 Hz 10 g operating, 100 g damage P.E.T. polyester, UL-94: V0 Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 8 grams 25 per plastic tube / 400 per carton box Rated Load Form A 10 A at 250 VAC, Resistive [2] 10 A at 24 VDC, Resistive [2] 7 A at 250 VAC, Res., 50k cycles [1] 5 A at 250 VAC, Res., 100k cycles [1] Silver nickel [1] or silver tin oxide [2] < 100 milliohms initially Form C Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 700 mW Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. 1.3 W 20°C (68°F) ambient 138°C (248°F) at nominal coil voltage Max. 155°C (311°F) Class F Max. Immersion Time Weight Packing unit in pcs NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2006-01-12 Junkersstrasse 3, D-82178 Puchheim, Germany AZ8P RELAY ORDERING DATA COIL SPECIFICATIONS BISTABLE (LATCHING): 1 COIL Nominal Coil VDC 3 5 6 9 12 18 24 36 48 60 Set VDC 2.2 3.7 4.5 6.7 9.0 13.5 18.0 27.0 36.0 45.0 Max. Continuous VDC 3.0 5.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 60.0 Reset VDC -0.75 -1.25 -1.50 -2.25 -3.00 -4.50 -6.00 -9.00 -12.00 -15.00 Max. Reset VDC -1.35 -2.25 -2.70 -4.05 -5.40 -8.10 -10.80 -16.20 -21.60 -27.00 Coil Resistance Ohm ± 10% 8 22 33 74 119 280 475 1,050 1,750 2,750 AZ8P1–1CH–3DE AZ8P1–1CH–5DE AZ8P1–1CH–6DE AZ8P1–1CH–9DE AZ8P1–1CH–12DE AZ8P1–1CH–18DE AZ8P1–1CH–24DE AZ8P1–1CH–36DE AZ8P1–1CH–48DE AZ8P1–1CH–60DE ORDER NUMBER* * “1CH” denotes silver nickel contacts. Substitute “1AE” in place of “1CH” for 1 Form A silver tin oxide contacts (10A version only). MECHANICAL DATA PC BOARD LAYOUT ventilation Viewed toward terminals WIRING DIAGRAMS Form A Form C Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2006-01-12 Junkersstrasse 3, D-82178 Puchheim, Germany