AZ935-2C-12DE

AZ935 20 AMP SUB-MINIATURE POWER RELAY FOR AUTOMOTIVE USE FEATURES • • • • • • Low cost Up to 20 Amp switching capability in a compact size Sealed Two separate relays in one package Vibration and shock resistant Designed for power windows, power seats and wiper applications • Extremely silent operation • QS-9000 Factory CONTACTS Arrangement Ratings DPDT (2 Form C) Max. switched power: 280 W Max. switched voltage: 100 VDC Max. switched current (make/break), continuous: 2 Form C: 25A/20A, 20A Material Resistance Silver nickel, silver tin oxide available < 100 milliohms at 1A, 5 VDC Dielectric Strength (at sea level for 1 min.) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 operations 2 x 105 operations at 20 A 14 VDC Res. 3 ms at nominal coil voltage 1.5 ms at nominal coil voltage (with no coil suppression) 500 Vrms coil to contact 500 Vrms between open contacts 100 megohms min. at 20°C, 500 VDC, 50% RH > 8.3% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55Hz, 10 g at 55-200 Hz 30 g, 11 ms, functional Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 15 grams Insulation Resistance Dropout COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 203 mW 1.0 W 20°C (68°F) ambient 42°C (108°F) nominal coil VDC 155°C (311°F) Ambient Temperature Operating Storage Vibration Shock Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time NOTES 1. 2. 3. 4. All values at 20°C (68°F). Maximum make current refers to in-rush current of lamp load. Relay may pull in with less than “Must Operate” value. Specifications subject to change without notice. Weight ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-04-29 Junkersstrasse 3, D-82178 Puchheim, Germany AZ935 RELAY ORDERING DATA COIL SPECIFICATIONS - DC Coil Nominal Coil VDC 12 Must Operate VDC 7.2 Max. Continuous VDC 15.0 Coil Resistance ±10% 255 ORDER NUMBER* 2 Form C (SPDT) AZ935–2C–12DE *Add suffix “T” for Silver tin oxide contact material. MECHANICAL DATA Outline Dimensions PC Board Layout 3 x .148 [3.75] .148 [3.75] .084 [2.12] .226 [5.73] .827 [21.0] .010 [0.25] 10 x .138 [3.5] .738 [18.75] .122 [3.1] .665 [16.88] .148 [3.75] .906 [23.0] .886 [22.5] 10 x ø.051 [ø1.3] Viewed toward terminals 10 x .016 [0.4] Wiring Diagram 9 10 5 4 10 x .035 [0.9] 8 3 7 6 2 1 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± 0.010” ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-04-29 Junkersstrasse 3, D-82178 Puchheim, Germany