AZ940-1C-9D

AZ940 10 AMP MINIATURE POWER RELAY FEATURES • • • • • 10 Amp switching capability 4 kV dielectric strength Epoxy sealed version available UL, CUR file E44211 VDE file 134326 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1250 VA (N.O.) 90 W or 750 VA (N.C.) Max. switched current: 10 A (N.O.), 3 A (N.C.) Max. switched voltage: 150 VDC* or 400 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (max.) Release Time (max.) Minimum operations 1 x 107 1 x 105 at 10 A 250 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Operating 10 g for 11 ms 1/2 sine pulse (no contact opening >100 usec) 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 7 grams 100 per styropor tray / 1000 per carton box 1 x 109 ohms minimum at 500 VDC Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) standard -40°C (-40°F) to 85°C (185°F) sensitive -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz Rated Load UL, CUR (N.O.) 10 A at 125 VAC general use, 100K cycles [1] [2] 10 A at 277 VAC cos phi 0.4, 10K cycles [1] [2] 5 A at 250 VAC general use, 100K cycles [1] [2] 5 A at 30 VDC [1] [2] 1/ HP at 125 VAC, 100K cycles [1] [2] 10 1/ 6 HP at 250 VAC, 100K cycles [1] [2] UL, CUR (N.C.) VDE 3 A at 250 VAC general use, 100 K cycles [1] [2] 3 A at 30 VDC resistive, 100K cycles [1] [2] Form A N.O.: 5 A 250 VAC [1] [2] Form C N.O.: 5 A 250 VAC [1] [2] Form C N.C.: 3 A 250 VAC [1] [2] Silver cadmium oxide [1] or silver nickel [2]. Gold plating available.