AZ943

AZ943 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • High performance Low seated height Flux tight and sealed versions available Class F insulation (155°C) available UL, CUR file E43203 TÜV file R2134654 GENERAL DATA SPST (1 Form A) SPDT (1 Form C) Form A and C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC 1 Form A 15 A at 125 VAC, general use 10A at 277 VAC, general use, 100k cycles TV - 5 120 VAC 1/ HP at 125 VAC 2 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) 1 Form C 10 A at 277 VAC, general use, 100,000 cycles 1/ HP at 125 VAC N.O. 2 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) TÜV Material Resistance 5 A at 250 VAC resistive, 100k cycles 12 A at 125 VAC resistive, 100k cycles Silver tin oxide < 100 milliohms initally (24 V, 1 A method) Life Expectancy Mechanical Electrical Operate Time Release Time 1 x 106 1 x 105 at 10A 277 VAC Res. 10 ms max. 5 ms max. (with no coil suppression) CONTACTS Arrangement Ratings UL, CUR Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 70°C(158°F) class B -40°C(-40°F) to 85°C(185°F) class F -40°C(-40°F) to 105°C(221°F) 0.062" (1.5 mm) DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 10 g 20 per plastic tube / 1000 per carton box COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise Temperature 203 mW 1.8 W at 20°C (68°F) Class B 2.4 W at 20°C (68°F) Class F 32°C (58°F) at nominal coil voltage Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Max. Solvent Temp. Max. Immersion Time Weight Packing unit in pcs NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-06-02 Junkersstrasse 3, D-82178 Puchheim, Germany AZ943 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 36 48 Must Operate VDC 3.8 4.5 6.8 9.0 13.5 18.0 27.0 36.0 Max. Continuous VDC 11.2 13.4 20.1 26.8 40.2 53.4 80.1 107.3 Coil Resistance Ohm ±10% 70 100 225 400 900 1,600 3,600 6,400 ORDER NUMBER Unsealed AZ943–1CH–5D AZ943–1CH–6D AZ943–1CH–9D AZ943–1CH–12D AZ943–1CH–18D AZ943–1CH–24D AZ943–1CH–36D AZ943–1CH–48D Sealed AZ943–1CH–5DE AZ943–1CH–6DE AZ943–1CH–9DE AZ943–1CH–12DE AZ943–1CH–18DE AZ943–1CH–24DE AZ943–1CH–36DE AZ943–1CH–48DE Substitute “1AH” in place of “1CH” to indicate 1 Form A contact. To indicate Class F version, add suffix “F”. MECHANICAL DATA PC BOARD LAYOUT .748 [19.0] .600 [15.3] 5 x ø .051 [ø 1.3] .134 [3.4] .059 [1.49] .236 [6.0] .618 [15.7] .472 [12.0] .185 [4.7] .017 [0.43] .480 [12.2] .559 [14.2] VIEWED TOWARDS TERMINALS .014 [0.36] 4x.016 [0.4] WIRING DIAGRAMS .039 [1.0] 4x.032 [0.8] FORM "A" FORM "C" VIEWED TOWARDS TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-06-02 Junkersstrasse 3, D-82178 Puchheim, Germany