AZ943S-1CH-24D

AZ943S 15 AMP MINIATURE PC BOARD RELAY SMT FEATURES • • • • • High performance Low seated height Flux tight version Class B insulation (130°C) standard UL, CUR file E43203 CONTACTS Arrangement Ratings SPDT (1 Form C) Form C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC 1 Form C 10 A at 277 VAC, general use, 100,000 cycles 1/ HP at 125 VAC N.O. 2 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) Silver tin oxide < 100 milliohms initally (24 V, 1 A method) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time 1 x 106 1 x 105 at 10A 277 VAC Res. 10 ms max. 5 ms max. (with no coil suppression) UL/CUR Ratings Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 70°C(158°F) -40°C(-40°F) to 105°C(221°F) 0.062" (1.5 mm) DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 10 g Material Resistance COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise Temperature 203 mW 1.8 W at 20°C (68°F) 32°C (58°F) at nominal coil voltage Max. 130°C (266°F) Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-08-26 Junkersstrasse 3, D-82178 Puchheim, Germany AZ943S RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 48 Must Operate VDC 3.8 4.5 6.8 9.0 13.5 18.0 36.0 Max. Continuous VDC 11.2 13.4 20.1 26.8 40.2 53.4 107.3 Coil Resistance Ohm ±10% 70 100 225 400 900 1,600 6,400 ORDER NUMBER AZ943S–1CH–5D AZ94S3–1CH–6D AZ943S–1CH–9D AZ943S–1CH–12D AZ943S–1CH–18D AZ943S–1CH–24D AZ943S–1CH–48D MECHANICAL DATA Outline Dimensions PC Board Layout .758 MAX [19.25] .620 MAX [15.75] .606 [15.40] 5X.079 [2.00] .087 [2.20] .059 [1.50] .601 MAX [15.27] .472 [12.00] .236 [6.00] .157 [3.99] .079 [2.00] .480 [12.19] .016 [0.40] .472 [12.00] .043 [1.10] .059 [1.50] 5X.197 [5.00] VIEWED TOWARD TERMINALS .620 MAX [15.75] .758 MAX [19.25] Wiring Diagram .472 [12.00] 2 5x.043 [1.10] 3 .008 [0.20] 5x.157 [4.00] .449 [11.40] 5 4 .059 [1.50] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Typical Soldering Profile 250 NOTES The soldering profile to the left is an example and is just to show one of various profiles AZ943S has been tested with. TC2 (°C) TC3 (°C) 200 temperature in °C 150 100 In order to make sure AZ943S fits to a specific profile, we strongly recommend to test under the real environment. 50 0 1 61 121 181 241 301 361 421 time in seconds ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-08-26 Junkersstrasse 3, D-82178 Puchheim, Germany