AZ946-2C-24DS

AZ946 MINIATURE PC BOARD RELAY FEATURES • • • • • • • • Subminiature size High sensitivity, 288 mW pick up Coils to 24 VDC Epoxy sealed for automatic wave soldering Contacts rated at 1 or 5 Amps Life expectancy to 20 million operations Extremely low cost UL, CUR file E43203 CONTACTS Arrangement Max. Ratings Light Duty 2 Form C (DPDT) Noninductive load: Max. switched power: 30 W or 277 VA Max. switched current: 1 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 1 A at 30 VDC resistive 1 A at 277 VAC general use (100k cycles) Max. switched power: 150 W or 1385 VA Max. switched current: 5 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 5 A at 30 VDC resistive 5 A at 277 VAC general use (100k cycles) * If switching voltage is greater than 30 VDC special precautions must be taken. Please contact the factory Material Resistance Light Duty: Silver, gold plated Medium Duty: Silver Cadmium Oxide, gold plated Light Duty: 100 milliohms max. initially Medium Duty: 100 milliohms max. (6 V 1 A method) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Dielectric Strength (at sea level for 1 min.) Minimum operations 2 x 107 1 x 105 (at rated load) 5 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) 1000 Vrms coil to contact 750 Vrms between open contacts 1000 Vrms contact set to contact set 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -10°C (14°F) to 60°C (140°F) standard -10°C (14°F) to 70°C (158°F) sensitive -10°C (14°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 5–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 12 grams Medium Duty Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 384 mW standard 288 mW sensitive 1.2 W at 20°C (68°F) 35°C (63°F) standard 30°C (54°F) sensitive 105°C (221°F) Max. Solder Temp. Max. Solder Time Max.Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Unsealed relays should not be dipped cleaned ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-16 Junkersstrasse 3, D-82178 Puchheim, Germany AZ946 RELAY ORDERING DATA Nominal Coil Must Operate VDC VDC 3 2.4 5 6 9 12 24 4.0 4.8 7.2 9.6 19.2 COIL SPECIFICATIONS - Medium Duty (5 Amp Contact) Max. Continuous Coil Resistance ORDER NUMBER VDC 4.2 7.1 8.4 12.7 16.9 33.9 ±10% 15 42 60 135 240 960 Unsealed AZ946–2CH–3D AZ946–2CH–5D AZ946–2CH–6D AZ946–2CH–9D Sealed AZ946–2CH–3DE AZ946–2CH–5DE AZ946–2CH–6DE AZ946–2CH–9DE AZ946–2CH–12D AZ946–2CH–12DE AZ946–2CH–24D AZ946–2CH–24DE RELAY ORDERING DATA COIL SPECIFICATIONS - Light Duty (1 Amp Contact) Nominal Coil Must Operate VDC VDC 3 2.4 5 6 9 12 24 4.0 4.8 7.2 9.6 19.2 Max. Continuous Coil Resistance VDC ±10% 4.9 20 8.2 9.8 14.7 19.6 39.0 56 80 180 320 1280 ORDER NUMBER Unsealed AZ946–2C–3DS AZ946–2C–5DS AZ946–2C–6DS AZ946–2C–9DS AZ946–2C–12DS AZ946–2C–24DS Sealed AZ946–2C–3DSE AZ946–2C–5DSE AZ946–2C–6DSE AZ946–2C–9DSE AZ946–2C–12DSE AZ946–2C–24DSE MECHANICAL DATA Outline Dimensions PC Board Layout .854 [21.7] .630 [16.0] .100 [2.5] .060 [1.5] .200 [5.1] .400 [10.1] .200 [5.1] .150 [3.8] .650 [16.5] .500 [12.7] 8x.138 [3.5] 8xø.060 [ø1.5] .060 [1.5] VIEWED TOWARD TERMINALS 8x.018 [0.44] 8x.039 [1.0] Wiring Diagram 3 4 5 6 2 1 8 7 VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-16 Junkersstrasse 3, D-82178 Puchheim, Germany