AZ970E-1C-9D

AZ970E/AZ971E 40 AMP MINIATURE POWER RELAY FOR AUTOMOTIVE USE FEATURES • • • • • • • • Low cost Up to 40 Amp switching capability in a compact size Open, covered or sealed Coils to 24 VDC Small footprint (European style) 1 Form A, B and C contacts available Vibration and shock resistant Designed for high in-rush applications GENERAL DATA SPST (1 Form A) SPST (1 Form B) SPDT (1 Form C) Resistive load: Max. switched power: Form A: 560 W Form B: 420 W Form C: 420 W Max. switched current: Form A: 40 A Form B: 30 A Form C: 30 A Max. switched voltage: 150* VDC * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. CONTACTS Arrangement Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 5 x 106 operations 1 x 105 operations at 40 A 14 VDC Res. 5 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) Ratings Dielectric Strength 500 VDC coil to contact (at sea level for 1 min.) 500 VDC between open contacts Insulation Resistance Dropout Ambient Temperature AZ970E Operating AZ970E Storage AZ971E Operating AZ971E Storage 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 6% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 20 grams Material Resistance Silver tin oxide < 100 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 514 mW (12 and 24 VDC Coil) 573 mW (6 VDC Coil) 5.3 W 20°C (68°F) ambient (AZ970E) 4.6 W 20°C (68°F) ambient (AZ971E) 56°C (101°F) nominal coil VDC (AZ970E) 59°C (106°F) nominal coil VDC (AZ971E) 155°C (311°F) Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Weight ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-24 Junkersstrasse 3, D-82178 Puchheim, Germany AZ970E/AZ971E RELAY ORDERING DATA — AZ970E — OPEN STYLE COIL SPECIFICATIONS Nominal Coil VDC 6 9 12 24 Must Operate VDC 3.3 5.1 6.8 13.9 Max. Continuous VDC 9.8 15.9 21.3 42.7 Coil Resistance Ohm ±10% 19.0 50.0 90.0 362.0 Form A (SPST) AZ970E–1A–6D AZ970E–1A–9D AZ970E–1A–12D AZ970E–1A–24D ORDER NUMBER Form B (SPST) AZ970E–1B–6D AZ970E–1B–9D AZ970E–1B–12D AZ970E–1B–24D Form C (SPDT) AZ970E–1C–6D AZ970E–1C–9D AZ970E–1C–12D AZ970E–1C–24D RELAY ORDERING DATA — AZ971E — With Dust Cover COIL SPECIFICATIONS Nominal Coil VDC 6 9 12 24 Must Operate VDC 3.3 5.1 6.8 13.9 Max. Continuous VDC 9.4 15.2 20.4 41.0 Coil Resistance Ohm ±10% 19.0 50.0 90.0 362.0 Form A (SPST) AZ971E–1A–6D AZ971E–1A–9D AZ971E–1A–12D AZ971E–1A–24D ORDER NUMBER* Form B (SPST) AZ971E–1B–6D AZ971E–1B–9D AZ971E–1B–12D AZ971E–1B–24D Form C (SPDT) AZ971E–1C–6D AZ971E–1C–9D AZ971E–1C–12D AZ971E–1C–24D *Add suffix “E” for epoxy sealed version. MECHANICAL DATA AZ970E Outline Dimensions and PCB Layout .740 [18.8 ± 0.4] .906 [23.0 ± 0.4] 3x ø.081 [ø2.1] .165 [4.2] .709 [18.0 ± 0.4] .232 [5.9] .134 [3.4] .433 [11] .563 [14.3] .106 [2.7] Terminal Dimensions Term. 3,5 1,2 4 Dimensions .041 [1.02] x .03 [0.76] .041 [1.02] x .018 [0.46] .041 [1.02] x .062 [1.57] Wiring Diagrams 4 .090 [2.3] .173 [4.4 ± 0.4] .130 [3.3] .087 [2.2] .476 [12.1] 4x ø.055 [ø1.4] FORM C 4 2 1 3 5 4 Viewed towards terminals AZ971E Outline Dimensions and PCB Layout .831 [21.1 ± 0.3] 1.031 [26.2 ± 0.3] 3x ø.081 [ø2.1] .165 [4.2] .831 [21.1 ± 0.3] .232 [5.9] .170 [4.3] .433 [11] .563 [14.3] .106 [2.7] 3 4 4 FORM B 2 1 4 4 .087 [2.2] .476 [12.1] 4x ø.055 [ø1.4] 4 .134 [3.4] .020 [.5] .138 [3.5 ± 0.5] .130 [3.3] FORM A 2 1 5 4 Viewed towards terminals Viewed towards terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-06-24 Junkersstrasse 3, D-82178 Puchheim, Germany