AZSR131-1AE-12D

AZSR131 35 AMP MINIATURE POWER RELAY FEATURES: • Dielectric strength 4500Vrms, 10KV surge • 35 Amp switching capability • Contact gap : 1.8mm/2.3 mm available • UL class F insulation system • GWT(IEC60335-1) version available • UL ：E365652 • TUV ：B 088793 005 • CQC ：17002168255 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 9695VA Max. switched current: 35A Max. switched voltage: 277VAC Max. continuous current: 35 A Rated Load UL TUV/CQC 26A at 277 VAC, resistive, 85°C, 50k cycles Electrical Minimum operations 100,000 cycles Min. ( 2.3mm gap ) 300,000 cycles Min. ( 1.8mm gap ) See UL/TUV/CQC ratings Operate Time(typical) 20 ms Max. at nominal coil voltage Release Time(typical) 10 ms Max. at nominal coil voltage (with no coil suppression) Dielectric Strength (Initial.) 4500 Vrms(coil to contacts) 2500 Vrms(between open contacts） Surge Voltage 10KV @1.2/50μs (coil to contacts) 35A at 277 VAC, resistive, 85°C, 30k cycles 22A at 277 VAC, resistive, 70°C, 100k cycles 26A at 277 VAC, resistive, 85°C, 50k cycles 33A at 277 VAC, cos phi 0.8, 85°C, 50k cycles 35A at 277 VAC, cos phi 0.8, 85°C, 30k cycles Greater than 35% of nominal coil voltage Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Storage At rated coil voltage Vibration 1.5mm DA at 10-55 Hz 2.0 W at 20℃(68℉) ambient Shock 20g 70℃ Max. at Rated voltage,35A,85℃ Enclosure P.B.T, Polyester Max. 155℃(311℉) class F Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270℃(518℉) Max. solder time 5 seconds Weight 25g Packing unit in pcs 50per tray/500per carton box AgSnO2(Silver tin oxide) Resistance ＜100 mΩ initially (at 6V, 1A, voltage drop method) COIL Power At pickup Voltage Max. Continuous Dissipation Temperature Rise Insulation Resistance 1,000MΩ min. at 20℃ 500VDC 50% RH Holding voltage Material Temperature Life Expectancy Mechanical 790 mw (typical) NOTES 1.All values at 20℃(68℉) 2.Relay may pull in with less than “Must Operate” value 3.Specifications subject to change without notice ZETTLER RELAY (XIAMEN) CO., LTD. -40℃(-40F )to 85℃(185℉) -40℃(-40F )to 105℃(221℉) www.zettlercn.com 5F,No.6 , Xinjin Road , Xinyang Industrial Zone, Haicang District, Xiamen, China. Tel:(0592)2631523 Fax: (0592)2631599 7/25/17 AZSR131 RELAY ORDERING DATA COIL SPECIFICATIONS @20℃ Nominal Coil VDC 5 9 12 18 24 48 Must Operate VDC 3.75 6.75 9 13.5 18 36 NOMENCLATURE Min. holding VDC 1.75 3.20 4.2 6.3 8.4 16.8 Max. Continuous VDC 6 10.8 14.4 21.6 28.8 57.6 Coil Resistance Ω±10% 18 58 103 230 410 1650 ORDER NUMBER AZSR131-1AE-5D AZSR131-1AE-9D AZSR131-1AE-12D AZSR131-1AE-18D AZSR131-1AE-24D AZSR131-1AE-48D AZSR131 - 1A E - 12D GW (200) (XXX) I II III IV V VI VII I. Basic Series AZSR131 II. Contact Form 1A: 1 form A III. Contact Material E: AgSnO2 IV. Coil Voltage 5, 9, 12, 18, 24, 48 VDC. V. Glow wire degree Blank: without glow wire GW: with glow wire VI. Contact Gap Blank: 1.8 mm (200): 2.3 mm VII. Special code Additional numbers or letters, which does not designate construction features or ratings MECHANICAL DATA PC BOARD LAYOUT Viewed toward terminals WIRING DIAGRAM Tolerance: ±0.3mm Viewed toward terminals Disclaimer: The specification is for referenece only. We could not evalue all the performance and all the parameters for every possible application.Thus the user should evaluate and select the suitable product for their own application. If there is any query, please contact ZETTLER. However, it is the user's responsibility to determine which product should be used only. 免责声明：此规格书仅用于参考。我们不能评估所有可能的应用条件下的性能和参数，所以用户需根据自己的应用评估 和选择合适的产品。如有疑问，可以咨询赛特勒；但仍然是用户的责任来选择和使用产品。 ZETTLER RELAY (XIAMEN) CO., LTD. www.zettlercn.com 5F,No.6 , Xinjin Road , Xinyang Industrial Zone, Haicang District, Xiamen, China. Tel:(0592)2631523 Fax: (0592)2631599 7/25/17