RAW23189

RA2 Automotive PCB relays • Cadmium - free contacts • Miniature size • Automative applications • High inrush current • Dust cover available • PCB mounting 1 Contacts Contact number & arrangement Contact material Voltage Max. switching voltage AC/DC Min. switching voltage Current Min. switching current Max. inrush current Rated current Max. breaking capacity Min. breaking capacity Resistance Max. operating frequency • at rated load • at motor load • at lamp load • no load see Table 1 AgSnO 2 ; AgSnO2 /Au 0,2 µm 60 V / 60 V 1V 1C/O 10 mA 110 A / 50 A (1NO/1NC) 20 A / 12 A (1NO/1NC) 270 W / 162 W (1NO/1NC) 1W £ 3 mW 1NO 10 mA 110 A 20 A 270 W 1W 2NO 10 mA 2 x 110 A 2 x 12,5 A 2 x168 W 1W 900 cycles/hour (2 s ON/ 2 s OFF) 450 cycles/hour (2 s ON/ 6 s OFF) 120 cycles/hour (2 s ON/ 30 s OFF) 36 000 cycles/hour Coil Voltage Rated voltage Must operate voltage (20°C) Must release voltage Operating range of supply voltage Rated power consumption Coil Voltage 5...48 V DC £ 0,6 Un ³ 0,15 Un see Table 1 1,44 W Insulation Voltage Insulation rated voltage Dielectric strength: • coil-contact • contact-contact Contact-coil distance • clearance • creepage Insulation Voltage 60 V AC 500 V AC 500 V AC ³ 1 mm ³ 1 mm General data General data Operating time (typical value) Release time (typical value) Electrical life • for 1C/O version • for 1N/O version • for 2N/O version Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storing • operating Cover protection category Solder bath temperature Soldering time Approvals 10 ms 10 ms 3 ms >105 at 20/12 A (1NO/1NC); 13,5 V DC >105 at 20 A; 13,5 V DC >105 at 2 x 12,5 A; 13,5 V DC >107 18,6 x 13 x 18,5 mm (IP 00 - without cover) 15,3 x 20,5 x 19,7 mm (IP 40 - with cover) 12 g -40...+100 °C -40...+85 °C IP 00 or IP 40 max. 270 °C max. 5 s GOST 2 RA2 Coil data Coil resistance (±10%) at 20 °C W 18 24 55 100 152 230 390 1 590 Automotive PCB relays Table 1 Coil operating range at 85 °C V DC min. 4,0 4,8 7,2 9,6 12,0 14,4 19,2 38,4 Coil code 1005 1006 1009 1012 1015 1018 1024 1048 Rated voltage V DC 5 6 9 12 15 18 24 48 max. 6,6 8,0 12,0 16,0 20,0 23,9 31,9 63,8 Connections diagram (pin side view) Dimensions Max. DC resistive load breaking capacity Fig. 1 RA2 Mounting Relays RA2 are designed for direct PCB mounting. Ordering codes Automotive PCB relays 3 2 See Table 1, page 2 31- AgSnO2 /Au 0,2 µm - without cover - with cover 2002-12-20