Z86C1200ZPD

P R E L I M I N A R Y Z8 REAL-TIME S ERIES CPS DC-4026-08 CUSTOMER PROCUREMENT SPECIFICATION Z8® REAL-TIME S SERIES IN-CIRCUIT EMULATOR MAIN FEATURES ■ Interchangeable µP Pods to Emulate Various Z8 Family Members ■ Source Level Debug for C ■ Real-Time Transparent Emulation up to 25 MHz ■ 33 MHz Available for Z86C93 and Z86C95 ■ 32K Frames (80 Bits Wide) of Execution Trace Buffer with Time Stamp ■ Real-Time Hardware Breakpoints ■ Complex Events to Trigger Breakpoints or Trace Logic ■ Two 16-bit Pass Counters ■ Eight Level Hardware Break Sequencer ■ Eight Channel User Logic State Analyzer ■ External Trigger Inputs and Outputs ■ Trace Display During Execution ■ Program and Data Memory Display/Edit During Execution ■ Windowing or Command-Driven User Interface ■ RS-232 Serial Interface to IBM® PC/XT/AT/386/486 and PS-2 ■ Made in U.S.A. This unit was designed to work with the IBM® PC/XT/AT/386/ 486 and compatible computers. A special window/menu user interface provides these unique features: ■ User defined windows ■ Full Macro Support ■ Pop-up windows for stack, source, trace buffer, registers, set-up, program and data memory. ■ Sixteen user defined set-ups to hold Breakpoint, Trace and Event information for easy recall from disk. ■ Source window for assembler and HLL debugging ■ 115 KBaud serial download ■ Full screen edit with mouse support ■ Monochrome, CGA, EGA, VGA and custom display formats support ■ 4K Frames (24 Bits Wide) of DSP Execution Trace Buffer (Z86C95) ■ In-Line Symbolic Assembler and Disassembler ■ Choose from 64K, 128K, or 256K of Emulation Progam RAM ■ 64K of Emulation Data RAM IBM PC SUPPORT DC-4026-08 (9-7-93) 1 P R E L I M I N A R Y Z8 R EAL-TIME S SERIES CPS DC-4026-08 COMPLEX EVENTS An Event is a set of conditions that control the operation of complex program breakpoints and trace start/stop logic in realtime. There are three Events available, each consisting of the combination of the following: ■ Up to 256K address breakpoints or ranges ■ 8-bit data pattern with less than, greater than, equal, not equal and don’t care combinations. ■ ■ External input with programmable trigger polarity In addition, Events can be counted/delayed by the use of two 16bit Pass Counters. An eight level hardware sequencer is available to sequentially trigger to/from any Event or Pass Counter. BREAKPOINTS Breakpoints are set to stop program status. Breakpoints can be RD, WR, INT, instruction fetch, operand read as qualifiers. triggered from a combination of: ■ Address or range of address ■ Complex Events ■ External input ■ Pass Counters ■ Sequencer ■ Trace full condition TRACE BUFFER The Trace Buffer is a high speed RAM used to capture, in real time, all activity on the microprocessor’s internal bus and pins. A dedicated start/stop logic allows filtering of unwanted information. The Trace Buffer remembers the selected 32K samples (frames) comprised of the following: ■ Address Bus ■ Data Bus ■ Control signals ■ I/O pins ■ Real-time Clock Stamp ■ User logic inputs (8 bits) ■ Any Pass Counter ■ Sequencer ■ Trace Full condition Additionally, the Trace Buffer is equipped with a special internal counter that allows tracing to stop after a specified number of instructions or cycles. This feature allows a trace to catch as much as 32K of small fragments (snapshots) of executed program at full running speed. The Trace can be started/stopped by the combination of: The Trace Buffer contents can also be examined during program execution without slowing down the microcontroller. ■ GO command SPECIFICATIONS ■ Any Event 2 Microcontrollers Emulated: Z86C1200ZPD Z86C10, Z86C20, Z86C11, Pod Z86C00, P R E L I M I N A R Y Z86C21, Z86E21, Z86C91, Z86C61 Pod Z86C5000ZPD Z86C09, Z86C19, Z86C30, Z86C40, Z86C90 Pod Z86C9300ZPD Z86C93 Pod Z86C9301ZPD Z86C93 (33 MHz) Pod Z86C9500ZPD Z86C95 Pod Z86C9501ZPD Z86C95 (33 MHz) Maximum Emulation Speed Up to 33 MHz (microcontroller dependent) Size 260 mm wide, 260 mm deep, 64 mm high Operating Temperature 0°C to +40°C Storage Temperature –10°C to +65°C Operating Humidity 0 to 90% Maximum Emulation Program Memory Base Z86C0000ZUSP064 (up to 25 MHz) Base Z86C0000ZUSP128 Base Z86C0000ZUSP256 Base Z86C9500ZUSP064 64 Kbytes 128 Kbytes 256 Kbytes 64 Kbytes Maximum Emulation Program Memory Base Z86C00001ZUSP064 (up to 33 MHz) Base Z86C00001ZUSP128 Base Z86C00001ZUSP256 Base Z86C95001ZUSP064 64 Kbytes 128 Kbytes 256 Kbytes 64 Kbytes Maximum Emulation Data Memory 64 Kbytes Program Memory Mapping 1K blocks Pass Counters Two, 16-bit each Trace Buffer 32K - 80 bits Sequencer Hardware, 8 levels User Probe Eight channel logic input One trigger input Seven trigger outputs (Events, Pass Counters, Sequencer) Host Interface Asynchronous RS-232C 9600/115 KBaud XON/XOFF support File Upload/Download Format Zilog MUFOM (IEEE 695-1985) Intel® HEX Intel AOMF 2500AD® Software Z8 REAL-TIME S ERIES CPS DC-4026-08 MINIMUM HOST REQUIREMENTS ■ IBM compatible PC/XT/AT/386/486 or PS-2 3 P R E L I M I N A R Y ■ ■ ■ ■ ■ 640 KByte memory 20 MByte hard disk RS-232 serial port (COM1 or COM2) Mouse (serial or bus) MDA, CGA, EGA, or VGA video adapter MINIMUM EMULATION SUPPORT Z8 R EAL-TIME S SERIES CPS DC-4026-08 Part Numbers Base Systems Pod Systems Z86C0000ZUSP064 Z86C0000ZUSP128 Z86C0000ZUSP256 Z86C9500ZUSPO64 Z86C9300ZPD Z86C1200ZPD Z86C5000ZPD Z86C9500ZPD Z86C0001ZUSP064 Z86C0001ZUSP128 Z86C0001ZUSP256 Z86C9501ZUSP064 Z86C9301ZPD Z86C9501ZPD One base unit and one emulation pod is required. Intel® A Registered Trademark of Intel Corp. 2500AD® A Registered Trademark of 2500AD Software, Inc. IBM ® A Registered Trademark of International Business Machines Corp. © 1993 by Zilog, Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Zilog, Inc. The information in this document is subject to change without notice. Devices sold by Zilog, Inc. are covered by warranty and patent indemnification provisions appearing in Zilog, Inc. Terms and Conditions of Sale only. Zilog, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from intellectual property infringement. Zilog, Inc. makes no warranty of merchantability or fitness for any purpose. Zilog, Inc. shall not be responsible for any errors that may appear in this document. Zilog, Inc. makes no commitment to update or keep current the information contained in this document. Zilog’s products are not authorized for use as critical components in life 4 support devices or systems unless a specific written agreement pertaining to such intended use is executed between the customer and Zilog prior to use. Life support devices or systems are those which are intended for surgical implantation into the body, or which sustains life whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Zilog, Inc. 210 East Hacienda Ave. Campbell, CA 95008-6600 Telephone (408) 370-8000 Telex 910-338-7621 FAX 408 370-8056