Z86E0600ZDP

CUSTOMER PROCUREMENT SPECIFICATION Z86E0600ZDP Z86E19/09/06 CONVERTER KIT GENERAL DESCRIPTION KIT CONTENTS The Z86E06 converter board is a simple adapter which converts the 28-pin footprint of the Zilog Z86E30 OTP chip to the 18-pin DIP configuration of the Z86E06/09/19 OTP chip. The converter supports all the functions of the Z86E06/09/19 except for SPI function. Z86E06 Converter Board 28-Pin Z86E30 MCU Socket 18-Pin Z86E06/09/19 Connector SUPPORTED DEVICES Cables 25-Pin RS-232 Cable 18-Pin Z86C19 Emulation Cable Z86E06/09/19 SPECIFICATIONS Power Requirements Not applicable Dimensions Width: 0.8 in. (2.0 cm) Length: 1.5 in. (3.8 cm) Documentation Z86E06 OTP Converter Kit User Guide Document No. Description 99C0214-001 Z86E19/09/06 Converter Kit ORDERING INFORMATION Part No: Z86E0600ZDP © 1991 by Zilog, Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Zilog, Inc. The information in this document is subject to change without notice. Devices sold by Zilog, Inc. are covered by warranty and patent indemnification provisions appearing in Zilog, Inc. Terms and Conditions of Sale only. Zilog, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from intellectual property infringement. Zilog, Inc. makes no warranty of merchantability or fitness for any purpose. Zilog, Inc. shall not be responsible for any errors that may appear in this document. Zilog, Inc. makes no commitment DC-4041-01 (4-17-91) to update or keep current the information contained in this document. Zilog, Inc. 210 East Hacienda Ave. Campbell, CA 95008-6600 Telephone (408) 370-8000 Telex 171-980 A/B ZILOG CPTO FAX 408 370-8056/8027 1