Z86E3400ZDV

CUSTOMER PROCUREMENT SPECIFICATION Z86E3400ZDV 1 OTP PROGRAMMING ADAPTER GENERAL DESCRIPTION The Z86E34 OTP Programming Adapter allows the Zilog Z86C5000ZEM and Z86CCP00ZEM Emulators to pro- gram the Z86E34 One-Time Programmable (OTP) microcontroller in 28-pin PLCC package. SUPPORTED DEVICE Packages Emulator Devices 28-Pin PLCC 28-Pin PLCC Z86C5000ZEM Z86CCP00ZEM Z86E33/733/E34 Z86E33/733 SPECIFICATIONS Dimensions Height: 1.000 in. (2.54cm) Width: 1.031 in. (2.62 cm) Length: 1.250 in. (3.17 cm) Operating Temperature 20°C, ±10°C Operating Humidity 10-90% RH (non-condensing) Power Requirements Not Applicable PACKAGE CONTENTS Hardware Qty. Description 1 28-pin PLCC OTP Programming Adapter Documentation User's Guide CP97Z8X4100 PRELIMINARY 1 1 Z8XE3400ZDV OTP Programming Adapter Zilog © 1997 by Zilog, Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Zilog, Inc. The information in this document is subject to change without notice. Devices sold by Zilog, Inc. are covered by warranty and patent indemnification provisions appearing in Zilog, Inc. Terms and Conditions of Sale only. Zilog, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from intellectual property infringement. Zilog, Inc. makes no warranty of merchantability or fitness for any purpose. Zilog, Inc. shall not be responsible for any errors that may appear in this document. Zilog, Inc. makes no commitment to update or keep current the information contained in this document. 2 Zilog’s products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to such intended use is executed between the customer and Zilog prior to use. Life support devices or systems are those which are intended for surgical implantation into the body, or which sustains life whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Zilog, Inc. 210 East Hacienda Ave. Campbell, CA 95008-6600 Telephone (408) 370-8000 FAX 408 370-8056 Internet: http://www.zilog.com PRELIMINARY CP97Z8X4100