Z8F04328100KIT

Z8 Encore® 4K Series Microcontrollers Z8F04328100KIT Development Kit User Manual UM018501-1004 PRELIMINARY ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126 Telephone: 408.558.8500 • Fax: 408.558.8300 • www.ZiLOG.com Z8F04328100KIT Development Kit User Manual ii This publication is subject to replacement by a later edition. To determine whether a later edition exists, or to request copies of publications, contact: ZiLOG Worldwide Headquarters 532 Race Street San Jose, CA 95126 Telephone: 408.558.8500 Fax: 408.558.8300 www.ZiLOG.com Document Disclaimer ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated. ©2004 by ZiLOG, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZiLOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZiLOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. Devices sold by ZiLOG, Inc. are covered by warranty and limitation of liability provisions appearing in the ZiLOG, Inc. Terms and Conditions of Sale. ZiLOG, Inc. makes no warranty of merchantability or fitness for any purpose Except with the express written approval of ZiLOG, use of information, devices, or technology as critical components of life support systems is not authorized. No licenses are conveyed, implicitly or otherwise, by this document under any intellectual property rights. PRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual iii Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii List of Figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Software (on CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 System/Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Supported Host System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Z8 Encore! 4K Series Development Board . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 UART with IrDA Endec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Power and Communication Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 External Interface Headers JP1 and JP2 . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Customer Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 UM018501-1004 PRELIMINARY Table of Contents Z8F04328100KIT Development Kit User Manual iv Table of Contents PRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual v List of Figures UM018501-1004 Figure 1. Z8 Encore! 4K Series Development Kit Contents . . . . . . . .2 Figure 2. Z8 Encore! 4K Series Development Board . . . . . . . . . . . . .7 PRELIMINARY List of Figures Z8F04328100KIT Development Kit User Manual vi List of Figures PRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual 1 Introduction The Z8 Encore!® 4K Series MCU is the part of the line of ZiLOG microcontroller products. The Z8 Encore! 4K Series Development Kit (Z8F04328100KIT) enables users to become familiar with the hardware and software tools available with this product. This kit consists of the 4KB version of the Z8 Encore! Development board that supports and presents the features of the Z8 Encore! 4K Series MCU. This kit allows users to begin writing application software and contains all supporting documents. This manual acquaints users with the Z8 Encore! 4K Series Development Kit, and gives instructions on setting up and using the tools to start building designs and applications. Kit Contents The Z8 Encore! 4K Series Development Kit contains the following: Hardware UM018501-1004 • • Z8 Encore! 4K Series Development board • 5VDC power supply Smart Cable for PC to Z8 Encore! 4K Series Development board (DB9 to six-pin male) PRELIMINARY Introduction Z8F04328100KIT Development Kit User Manual 2 Packaging CD-ROM Containing Documentation Power Supply Smart Cable Development Board Figure 1. Z8 Encore! 4K Series Development Kit Contents Software (on CD-ROM) • • • • ZDS II- Z8 Encore!® IDE with ANSI C-Compiler Sample code Document browser Acrobat Reader install program Documentation • • • Introduction Quick Start Guide Registration card Z8 Encore! 4K Series technical documentation (on CD-ROM) PRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual 3 – – – – Development Kit User Manual ZDS II - IDE User Manual eZ8 CPU User Manual Application notes The sample code is installed with ZDS II and resides in the \samples in the user's disk drive. The documentation can be installed by the user with the DemoShield interface or can be viewed on the CD-ROM using the DemoShield menus and a PDF reader. A copy of the Acrobat installer is provided on the CDROM and can be installed from the DemoShield install screen. After installing the documentation on the user’s system Windows Explorer can be used to select any document to be viewed with your favorite PDF file viewer. System/Software Requirements IBM PC (or compatible computer) with the following minimum configurations: Supported Host System Configuration UM018501-1004 • Win98 Second Edition, WinNT 4.0 Service Pack 6, Win2000 Service Pack 3, WinXP Professional Service Pack 1 • • • • • • PentiumII/233MHz processor or higher up to Pentium IV, 2.8 GHz 96 MB RAM or more 25 MB hard disk space or more Super VGA video adapter CD-ROM One or more RS-232 communication ports PRELIMINARY Introduction Z8F04328100KIT Development Kit User Manual 4 Introduction PRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual 5 Installation Follow the directions in the Quick Start Guide for software installation and setup of the Z8 Encore! 4K Series Development kit. UM018501-1004 PRELIMINARY Installation Z8F04328100KIT Development Kit User Manual 6 Installation PRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual 7 Z8 Encore! 4K Series Development Board Introduction The Z8 Encore! 4K Series Development board is a development and prototyping board for the Z8 Encore! 4K Series MCU. The board provides customers with a tool to evaluate features of Z8 Encore! 4K Series MCU, and to start developing an application before building the hardware. Figure 14. Z8 Encore! 4K Series Development Board UM018501-1004 PRELIMINARY Z8 Encore! 4K Series Development Z8F04328100KIT Development Kit User Manual 8 Features • • • • • • • • • • • Z8 Encore!® MCU (28-pin SOIC) 3 LEDs RS-232 interface IrDA transceiver Two pushbuttons, RESET and TEST 5 VDC power connector On-Chip Debugger interface Header for ADC input Prototyping area External interface connectors JP1 and JP2 2.7–3.6 V operating voltage with 5V-tolerant inputs MCU The Z8 Encore! 4K Series MCU is member of a family of ZiLOG microcontroller products based upon the 8-bit eZ8 core CPU. The Flash in-circuit programming capability allows for faster development time and program changes in the field. The eZ8 core CPU is upward compatible with existing Z8® instructions. The rich peripheral set of the Z8 Encore! 4K Series makes it suitable for a variety of applications including motor control, security systems, home appliances, personal electronic devices, and sensors. The Development board contains circuitry to support and present all the features of the Z8 Encore! 4K Series. The main features of the Z8 Encore! 4K Series are: Z8 Encore! 4K Series Development BoardPRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual 9 • • • • • • • • • • • • • • • • • eZ8 core CPU 4KB Flash memory with in-circuit programming capability 1KB register RAM 5-channel, 10-bit analog-to-digital converter (ADC) Full-duplex UART I2C interface (Master Mode only) Serial Peripheral Interface (SPI) Infrared Data Association (IrDA)-compliant infrared encoder/decoder Two 16-bit timers with capture, compare, and PWM capability Watch-Dog Timer (WDT) with internal RC oscillator Eleven (20-pin package) or nineteen (28-pin package) I/O pins Programmable priority interrupts On-Chip Debugger Voltage Brown-out Protection (VBO) Power-On Reset (POR) 2.7–3.6 V operating voltage with 5V-tolerant inputs Operating temperatures: 20° ±10° C For further information on the Z8 Encore!® family of devices, consult the product specification, P/N PS0197, available for download from www.zilog.com. UART with IrDA Endec The Z8 Encore! 4K Series (component U5)contains a fully-functional, high-performance UART with Infrared Encoder/Decoder (ENDEC). The Infrared Endec is integrated with an on-chip UART allowing easy com- UM018501-1004 PRELIMINARY Z8 Encore! 4K Series Development Z8F04328100KIT Development Kit User Manual 10 munication between the Z8 Encore!® 4K Series and IrDA transceivers. Infrared communication provides secure, reliable, low-cost, point-topoint communication between PCs, PDAs, cell phones, printers and other infrared enabled devices. Power and Communication Interfaces Table 1 provides jumper information concerning the shunt status, functions, devices and defaults affected of jumpers JP3 and JP4. Table 1. Jumpers JP3 and JP4 Jumper Status JP3* OUT JP3 Device Affected Status Default RS-232 interface Enabled X IN RS-232 interface Disabled JP4* OUT IrDA interface Enabled JP4 IN IrDA interface Disabled JP5 OUT U5 RESET/ PD0 PD0 (GPIO) JP5 IN U5 RESET/ PD0 RESET when SW1 pressed X X Note: * These jumpers must not be OUT at the same time External Interface Headers JP1 and JP2 External interface headers JP1 and JP2 are shown in the schematic on page 11. Z8 Encore! 4K Series Development BoardPRELIMINARY UM018501-1004 Z8F04328100KIT Development Kit User Manual Schematics 11 The following diagrams provide schematics for the Z8 Encore! 4K Series Development Board. 5 4 PA6_nT1OUT 1 2 100 GREEN R8 D3 PA7_T1OUT 3 1 R9 SW2 VCC_33V 2 GND 100 YELL TEST 100K D PC3_COUT R11 R10 D4 1 100 2 1 If Module is plugged onto the Dev Platform the local RS232 interface is disabled by pin 50 of JP2 JP2 connector 2 PA2 GND GND PB4_ANA7 PC1_ANA5 PB3_ANA3 PB1_ANA1 VCC_33V PC4 PC7 PC3_COUT PA6_nT1OUT GND PA7_T1OUT 10 RED VCC_33V VCC_33V 2 Note 1: PB6 and PB7 are dual function pins (GPIO or Analog Supply) R12, R13, R16, and R17 are zero-ohm jumpers used in conjuntion with GPIO Control Registers to select function desired. The development board is shipped with jumpers configured for Analog Supply. U8 is an optional filter that can be used to improve the quality of the Analog Supply Table 1 shows the configurations recommended R7 D2 PA3_CTS0 PA4_RXD0 NOTE 1: R12 GND TABLE 1 R12 R13 R16 R17 0 U8 U8 none 0 ohm none 0 ohm Analog Supply 0 ohm none 0 ohm none VCC_33V none 1 GND GPIO IO optional IO SW1 GND R13 PB6 3 R19 10K JP5 2 -RESET VCC_33V 1 2 0 EMI Filter VCC_33V HEADER 2 C U6 PB1_ANA1 PB2_ANA2 PB3_ANA3 VCC_33V PA0_T0IN PA1_T0OUT GND PA2 PA3_CTS0 PA4_RXD0 1 2 3 4 5 6 7 8 9 10 U5 20 pin footprint PB1/ANA1 PB2/ANA2 PB3/CLKIN/ANA3 VDD PA0/T0IN/T0OUT/XIN/ PA1/T0OUT/XOUT GND PA2/DE PA3/CTS0 PA4/RXD0 PB0/ANA0 PC3/COUT/LED PC2/ANA6/LED PC1ANA5/CINN/LED PC0/ANA4/CINP/LED DBG RESET/PD0 PA7/T1OUT PA6/T1IN/T1OUT PA5/TXD0 PB0_ANA0 PC3_COUT PC2_ANA6 PC1_ANA5 PC0_ANA4 DBG PD0 PA7_T1OUT PA6_nT1OUT PA5_TXD0 20 19 18 17 16 15 14 13 12 11 PB2_ANA2 PB4_ANA7 PB5 PB3_ANA3 SENSE 0.001uF PA3_CTS0 PA4_RXD0 PA5_TXD0 Z8F04xA Z8F0423 R14 0 VCC_33V PA0_T0IN PA1_T0OUT GND C10 PA2 PA3_CTS0 PA4_RXD0 PA5_TXD0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R16 0 PB2/ANA2 PB4/ANA7 PB5/Vref PB3/ANA3/CLKIN PB6(AVDD) VDD PA0/T0IN/T0OUTXIN PA1/T0OUT/XOUT GND PB7(AGND) PA2/DE PA3/CTS0 PA4/RXD0 PA5/TXD0 28 27 26 25 24 23 22 21 20 19 18 17 16 15 PB1/ANA1 PB0/ANA0 PC3/COUT/LED PC2/ANA6/LED PC1/ANA5/CINN/LED PC0/ANA4/CINP/LED DBG RESET/PD0 PC7/LED PC6/LED PA7/T1OUT PC5/LED PC4/LED PA6/T1IN/T1OUT 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 A21 37 A22 39 -CS0 41 -CS2 43 D1 45 D3 47 D5 49 D7 51 -MREQ 53 GND 55 -WR 57 -BUSACK 59 1 3 3 PB7 PB0_ANA0 2 1 2 PB1_ANA1 PB2_ANA2 PB3_ANA3 PC0_ANA4 PC1_ANA5 PC2_ANA6 PB4_ANA7 C11 0.001uF C12 0.001uF C13 0.001uF C14 0.001uF C15 0.001uF C16 0.001uF C17 0.001uF C20 8 MHz C18 0.001uF NOTE 2 GND J2 TABLE 2 Clock Mode R14 Note 2: The Internal Only A none Crystal 0 Ohm Ceramic Res 0 Ohm External CMOS none Note 2: The XP supports internal, external crystal, external ceramic resonator, external R/C and external CMOS drive clock 4K does not support an external oscillator even though crystal Y1 is installed. modes. R14, R15, R18, C19, C20 and Y1 are used to support none none none none none the clock mode selected. The development board is shipped 220 Ohm none Yes Yes Yes configured for external 8Mhz ceramic resonator or internal clock operation. 0 Ohm none none none Yes Table 2 shows the recommended clock mode configurations. none none none none none R15 R18 C19 C20 GND -DIS_232 -DIS_IRDA -DIS_IrDA GND Y1 PB0_ANA0 PB1_ANA1 PB2_ANA2 PB3_ANA3 PC0_ANA4 PC1_ANA5 PC2_ANA6 PB4_ANA7 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 -TRSTN -F91_WE GND A6 A10 GND A8 A13 A15 A18 A19 A2 A11 A4 A5 NOTE 1: C19 PA5_TXD0 connector 1 for reference onlyJP1 DBG 1M Y1 PD0 GND HEADER 30x2/SM R18 B D C PB1_ANA1 PB0_ANA0 PC3_COUT PC2_ANA6 PC1_ANA5 PC0_ANA4 DBG PD0 PC7 PC6 PA7_T1OUT PC5 PC4 PA6_nT1OUT R17 0 GND PC2_ANA6 PC0_ANA4 PB2_ANA2 PB0_ANA0 GND PC5 PC6 PB5 PA0_T0IN PA1_T0OUT PA2 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 28 pin footprint Z8F04xA_28 Z8F0423 R15 0 PB6 PB7 RESET/TEST2 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 2 4 6 8 10 12 14 16 VCC_33V A0 A3 VCC_33V A7 A9 A14 A16 GND A1 A12 A20 A17 -DIS_FLASH VCC_33V A23 -CS1 D0 D2 D4 GND D6 -IOREQ -RD -INSTRD -BUSREQ B HEADER 30x2/SM A HEADER 8X2 Title XP 4K MDS Processor Module. Schematic. (Use PA0_T0IN pin on JP2) Size B Date: 5 4 3 2 Document Number Rev 96C0941-001 Wednesday, February 25, 2004 B Sheet 1 of 2 1 Schematic, Z8 Encore! 4K Series Development Board, Page 1 of 2 UM018501-1004 PRELIMINARY Schematics Z8F04328100KIT Development Kit User Manual 5 4 3 2 12 1 VCC_33V J1 PWR JACK 5V RXE050 U1 C2 0.1uF VCC + C3 C4 0.1uF 100/10 5 VIN OUT 2 4 SENSE SHDN GND -Z_RST VCC_33V PA5_TXD0 C1C2+ 6 C2- PA5_TXD0 C1 0.1uF V+ 3 CONSOLE GND P1 C5 0.1uF V- 7 13 T1IN T1OUT 17 GND 12 T2IN T2OUT 8 PA3_CTS0 15 R1OUT R1IN 16 PA4_RXD0 10 R2OUT R2IN 9 R1 1 6 2 7 3 8 4 9 5 TXD0 CTS0 RXD0 D + C7 C8 680 PA3_CTS0 100/10 3 LT1129-3.3/DD 1 4 5 U7 SENSE C1+ C6 0.1uF D VCC_33V 2 19 F1 VCC 2 3 1 PA4_RXD0 2 0.1uF DB9 Female USER 3.3 OK 1 20 EN SHDN MAX3222 GND NC NC 14 11 18 LED 1 GND D1 VCC_33V GND R2 10K C U3A 14 C 14 74LVC04/SO U3B 1 -DIS_232 2 7 74LVC04/SO 3 JP3 4 1 2 7 GND U3C 74LVC04/SO GND 5 R3 C9 VCC_33V 6 68 330nF R4 B 7 14 14 R5 10K U3E U3D PA5_TXD0 74LVC04/SO 74LVC04/SO 11 B U4 2R7 9 -DIS_IRDA 10 IRDA_SD 8 PA4_RXD0 5 VCC 1 LEDA 2 TXD 4 SD 3 RXD 6 GND 7 JP4 7 1 2 T 14 DIS RS232 ZHX1810 0 GND 14 DIS IRDA GND U3F VCC_33V R6 10K 1 2 3 4 5 12 1 2 3 4 5 74LVC04/SO 13 7 A TP1 GND TP2 P2 VCC_33V GND 1 3 5 DBG INTERFACE 2 4 6 A -Z_RST DBG DBG Title XP 4K MDS Processor Module. Schematic. Header 3x2 Size B Date: 5 4 3 2 Document Number Rev 96C0941-001 Monday, March 01, 2004 B Sheet 2 of 2 1 Schematic, Z8 Encore! 4K Series Development Board, Page 2 of 2 UM018501-1004 PRELIMINARY Schematics Z8F04328100KIT Development Kit User Manual 13 Customer Feedback If you note any inaccuracies while reading this User Manual, please copy and complete this form, then mail or fax it to ZiLOG (see Return Information, below). We also welcome your suggestions! Product Information Z8F04328100KIT Development Kit Serial # or Board Fab #/Rev. # Software Version Document Number Host Computer Description/Type Customer Information Name Company Address City/State/Zip Country Phone Fax E-Mail Return Information ZiLOG System Test/Customer Support 532 Race Street San Jose, CA 95126 Fax: (408) 558-8536 ZiLOG Customer Support Problem Description or Suggestion Provide a complete description of the problem or your suggestion. If you are reporting a specific problem, include all steps leading up to the occurrence of the problem. Attach additional pages as necessary. UM018501-1004 PRELIMINARY Customer Feedback Z8F04328100KIT Development Kit User Manual 14 Customer Feedback PRELIMINARY UM018501-1004