ZMOTION™ Lens and
Pyroelectric Sensor
Product Specification
PS028609-0213
Copyright ©2013 Zilog, Inc. All rights reserved.
www.zilog.com
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
ii
Warning: DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS.
LIFE SUPPORT POLICY
ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF
THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION.
As used herein
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b)
support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in a significant injury to the user. A
critical component is any component in a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system or to affect its safety or
effectiveness.
Document Disclaimer
©2013 Zilog, Inc All rights reserved. Information in this publication concerning the devices, applications,
or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES
NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE
INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO
DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED
IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED
HEREIN OR OTHERWISE. The information contained within this document has been verified according
to the general principles of electrical and mechanical engineering.
ZMOTION and Z8 Encore! XP are trademarks or registered trademarks of Zilog, Inc. (An IXYS
Company). All other product or service names are the property of their respective owners.
PS028609-0213
Disclaimer
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
iii
Revision History
Each instance in the revision history table reflects a change to this document from its previous revision. For more details, refer to the corresponding pages or appropriate links provided in the table below.
Date
PS028609-0213
Revision
Level
Page
Number
Description
Feb
2013
09
Moved NCL-11 lens specification to Table 2; added the 2, 8
CM 0.77 GI V2 lens specification; alphanumerically reordered all lenses.
May
2012
08
Added the NCL-11 and EWA 0.3 GI V2 lens specifications.
36, 18
Nov
2011
07
Added the NCL-3R and NCL-10S lens specifications.
22, 34
Mar
2011
06
Intrusion lens specifications added.
38
Jan
2011
05
Modifications to some lens/sensor descriptions in Table 2
2.
Jan
2011
04
Updated to include two new Nicera sensors.
Nov
2010
03
Updated to new Zilog/IXYS logo and accepted Zilog
All
style; replaced all instances of ePIR with advanced passive infrared.
Sep
2010
02
Replaced Zilog logos, ePIR with ZMOTION, and Zdots
with Module; fixed formatting and pagination issues;
removed references to GP and General Purpose.
All
Oct
2010
01
Original issue
All
19, 29
Revision History
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
iv
Table of Contents
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PIR Sensor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ZMOTION Lens Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ZMOTION Detection and Control Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AA 0.9 GI T1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CM 0.77 GI V2 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CM 0.77 GI V3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CM 0.77 GI V5 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CWM 0.5 GI V1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EWA 0.3 GI V2 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
NCL-3B Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
NCL-3R Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
NCL-9(26) Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
NCL-10IL Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
NCL-10S Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
NCL-11 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ZMOTION Intrusion Detection Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .
LR 1.2 GI 12 V3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VB 1.2 GI V1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WA 1.2 GI 12 V4 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
39
40
41
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
PS028609-0213
Table of Contents
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
1
Overview
Zilog’s ZMOTION Detection and Control and Intrusion Detection product families provide integrated and flexible solutions for Passive Infrared (PIR)-based motion detection
applications. These product families are based on the ZMOTION MCU, a high-performance microcontroller featuring integrated PIR motion detection algorithms. Each family
includes a selection of lenses and PIR sensors to fit a wide range of application requirements. Each lens and sensor combination is optimized for its intended application by configuration settings loaded into the ZMOTION MCU ensuring the best possible
performance while significantly reducing development risk and minimizing time to market. Zilog’s PIR Motion Detection Technology provides a dramatic improvement in both
sensitivity and stability over traditional designs and is scalable to many market segments
including Security/Intrusion Detection, Lighting Control, HVAC, Access Control, Vending, Display, Proximity, Power Management, Occupancy Sensing and many others.
This document provides the zone patterns and mechanical dimensions for the Zilog-supported lenses and pyroelectric sensors included in the ZMOTION Family. Each supported
lens and pyroelectric sensor combination is provided with an associated configuration file
for the ZMOTION MCU. It is possible to use other lenses and pyroelectric sensors not
directly supported by Zilog by developing the appropriate configuration settings based on
one of the existing files.
There are two general groups of lenses provided:
•
•
ZMOTION Detection and Control for general motion detection applications
ZMOTION Intrusion Detection for security applications
All lenses and pyroelectric sensors listed in this document are available from Zilog as a
bundle (which includes MCU, lens and pyroelectric sensor) or individually from their
associated manufacturers. Because Zilog is regularly adding new lens support to these
ZMOTION product families, please obtain the latest version of this document from our
website at: www.zilog.com/ZMOTION.
PS028609-0213
Overview
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
2
PIR Sensor Specifications
The pyroelectric sensors included in the ZMOTION product families are manufactured by
Nippon Ceramic Company Ltd. (Nicera). Please refer to their website for any specific
information you may require.
Table 1 shows the pyroelectric sensors available for both the ZMOTION Detection and
Control and Intrusion Detection Families.
Table 1. ZMOTION Pyroelectric Sensors
Manufacturer
Part Number
Description
Nicera
RE200B-P
Basic Dual Element
Nicera
SDA02-54-P
Premium Dual Element
Nicera
SBDI46-504AA
Quad Element
ZMOTION Lens Selection Guide
Select a lens and pyroelectric sensor based on the intended application from Table 2.
Lenses and pyroelectric sensors for security/intrusion-related applications are listed in
Table 3.
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors
Part Number
Description
AA 0.9 GI T1
Lens Specification – see
page 7
Animal Alley Array (88°)
35.6mm x 49.9mm Flat
Fresnel lens
22.9mm focal length
25 meter range
22 equal segments
Recommended
Applications
Configuration
Header File
Corner wall mount or very API_INIT_01.h
high ceiling with rectangular floor pattern
Pyroelectric
Sensor
RE200B-P
SDA02-54-P
Warehouse Lighting (Bay
Light)
Combined Intrusion and
Lighting Control
HVAC
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of the standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this lens are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213
PIR Sensor Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
3
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors (Continued)
Part Number
Description
CM 0.77 GI V2
Lens Specification – see
page 8
Ceiling Mount Array
(360°)
37mm diameter circular
lens
Recommended
Applications
Configuration
Header File
Pyroelectric
Sensor
High ceiling mount for
commercial lighting control
API_INIT_02.h
SBDI46-504AA
RE200B-P
Commercial HVAC
19.6 mm focal length
12.2 m radius at 3.7 m
height
4:1 floor coverage diameter-to-height ratio
CM 0.77 GI V3
Lens Specification – see
page 10
Ceiling Mount Array
(360°)
Ceiling Mount for standard commercial heights
37mm diameter circular
lens
Lighting Control
19.6mm focal length
Meeting rooms
API_INIT_02.h
RE200B-P
SBDI46-504AA
HVAC Control
3.7m radius at 2.4m
height
3:1 floor coverage diameter to height ratio
CM 0.77 GI V5
Lens Specification – see
page 12
Ceiling Mount Array
(360°)
37mm diameter circular
lens
High ceiling mount for
API_INIT_03.h
commercial and industrial
applications
19.6mm focal length
Commercial Lighting Control
12.2m radius at 12.2m
height
Commercial HVAC Control
RE200B-P
SBDI46-504AA
2:1 floor coverage diameter to height ratio
CWM 0.5 GI
V1 Lens Specification – see
page 15
Ceiling/Wall Mount Array
(180°)
Wall or ceiling mount for API_INIT_04.h
office or meeting room
Circular lens with 24mm x lighting and HVAC control
24mm square base
Room Lighting and HVAC
Control
14.2mm focal length
RE200B-P
SBDI46-504AA
Board mount clip-in
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of the standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this lens are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213
ZMOTION Lens Selection Guide
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
4
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors (Continued)
Part Number
Description
EWA 0.3 GI V2 Extra Wide Angle Wall
Lens Specifi- Mount Array (180°)
cation – see
14mm x 28mm
page 18
7.6mm focal length
5 meter range
16 equal segments
Recommended
Applications
Configuration
Header File
Pyroelectric
Sensor
Room occupancy and
proximity sensing
N/A*
RE200B-P
API_INIT_06.h
RE200B-P
API_INIT_07.h
RE200B-P
API_INIT_05.h
RE200B-P
180° detection with single
pyro
Wall mount room lighting
control
AC light switch replacement
Hotel room thermostats
NCL-3B Lens 10mm wall mount array
Specification – (60° x 60°)
see page 19
Clips on to pyroelectric
sensor
Proximity or Entrance
Detection
Kiosk
Vending
4 beams (X); 2 beams (Y) HVAC
10m range
Display counters
NCL-3R Lens 10mm Wall/Ceiling Mount Proximity or Entrance
Specification – Array (80° x 30°)
Detection
see page 22
Clips on to pyroelectric
Kiosk
sensor
Vending
6 beams (X); 2 beams (Y)
HVAC
10m range
Display counters
NCL-9(26)
Lens Specification – see
page 26
Clip-on 15mm Array
(360°)
Room Occupancy and
Proximity Sensing
Clips on to pyroelectric
sensor
Lighting Control
SBDI46-504AA
HVAC Control
2.25m radius at 2m height Appliance
2.1:1 Floor coverage
Kiosk/Display Control
diameter to height ratio
Vending Power Management Appliance
Power Management
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of the standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this lens are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213
ZMOTION Lens Selection Guide
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
5
Table 2. ZMOTION Detection and Control Lenses and Pyroelectric Sensors (Continued)
Recommended
Applications
Configuration
Header File
Pyroelectric
Sensor
NCL-10IL Lens 10mm Wall/Ceiling Mount
Specification – Array (80° x 30°)
see page 29
Clips on to pyroelectric
sensor
Proximity or Entrance
Detection
API_INIT_07.h
RE200B-P
NCL-10S Lens 10mm wall mount (27°)
Specification – directional
see page 34
Clips on to pyroelectric
sensor
Entrance detection
API_INIT_09.h
RE200B-P
API_INIT_0A*
RE200B-P
Part Number
Description
Kiosk
Vending
6 beams (X); 2 beams (Y) HVAC
10m range
Display counters
2 beams (X), 1 beam (Y)
10m range
NCL-11 Lens Wall mount array 104°
Specification – (X), 37° (Y)
see page 36
32 detection zones
Kiosk
Vending
HVAC
Display counters
Room occupancy and
proximity sensing
Consumer electronics and
Circuit board mount, black appliance power management
rectangular lens
Display power manage4 meter range
ment
TV auto shut-off
Keypad motion detector
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of the standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this lens are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
PS028609-0213
ZMOTION Lens Selection Guide
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
6
Table 3. ZMOTION Intrusion Detection Lenses and Pyroelectric Sensors
Part Number
Description
Long Range Array
LR 1.2 GI 12
V3 Lens Speci- 42.6 mm x 61.0 mm Flat
fication – see Fresnel
page 39
30.5 mm (1.2ʺ) focal
length
Configuration
Header File
Pyroelectric
Sensor
API_INIT_10.h
RE200B-P
Wall or ceiling mount cur- API_INIT_11.h
tain or vertical barrier
security/intrusion motion
detector
RE200B-P
Corner/Wall Mount secu- API_INIT_09.h
rity/intrusion motion
detector
RE200B-P
Typical Applications
Wall mount long range
corridor/hallway security/
intrusion motion detector
30.5 meter (100') range
3:1 floor coverage diameter to height ratio
VB 1.2 GI V1
Lens Specification – see
page 40
Vertical Barrier Array
42.6 mm x 61.0 mm Flat
Fresnel
30.5 mm (1.2ʺ) focal
length
15 meter range, horizontal
7 meter range, vertical
WA 1.2 GI 12 Wide Angle Array (88°)
V4 Lens Speci- 42.6 mm x 61.0 mm Flat
fication – see Fresnel
page 41
30.5 mm (1.2ʺ) focal
length
18 meter range
Pet immune detector
Wide area security motion
detector
Note: *The NCL-11 and EWA 0.3 GI V2 lenses are not currently part of the standard ZMOTION bundled suite or
offered in ZMOTION development kits. However, the optimized API settings for this lens are available in the
ZMOTION Detection Lens and Pyro Sensor Configuration Guide (WP0018).
ZMOTION Detection and Control Lens Specifications
Figures 1 through 27 on the following pages discuss the specifications of the lenses
selected for the ZMOTION Detection and Control family of products. To see specifications for lenses used in security and intrusion detection applications, refer to the ZMOTION Intrusion Detection Lens Specifications section on page 38.
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
7
AA 0.9 GI T1 Lens Specification
The AA 0.9 GI T1 lens array is optimized for dual element pyroelectric sensors in long
range sensing applications. It is normally used with the grooved side facing the pyroelectric detector, and curved at a 0.9 inch (22.9 mm) radius about the sensitive area of the
detector. The detector position should be 0.492" (12.5 mm) below the upper edge, and centered left-right.
AA 0.9 GI T1
FRONT VIEW:
49.9mm
(1.965in)
TOP VIEW:
12.5mm
(.492in)
35.6mm
(1.400in)
15 m
(45ft)
0
88°
15 m
(45ft)
SIDE VIEW:
2.1m
(6.8ft)
15m
(45ft)
Figure 1. The AA 0.9 GI T1 Lens Specification
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
8
CM 0.77 GI V2 Lens Specification
The CM 0.77 GI V2 lens is intended for high ceiling-mounted commercial lighting and HVAC
applications in which high floor coverage is required. See Figures 2 and 3.
Detector Position
11.7mm
(0.46in)
Grooved Side
Notch Radius 1.5mm (0.060in)
19.6mm
(0.77in)
15°
Inactive Area
TOP VIEW:
9.1m
(30ft)
CL
52.5mm
(2.066in)
6.1m
(20ft)
7.8mm
(0.3in)
CL
3.0m
(10ft)
CL
0
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
6.1m
(20ft)
9.1m
(30ft)
SIDE VIEW:
0
8ft
(2.4m)
7.3m
(24ft)
4.3m
(14ft)
2.4m
(8ft)
0.9m 0 0.9m
(3ft)
(3ft)
2.4m
(8ft)
4.3m
(14ft)
7.3m
(24ft)
Figure 2. CM 0.77 GI V2 Lens Specification: Front View
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
9
9.1m
(30ft)
CL
6.1m
(20ft)
3.0m
(10ft)
CL
0
3.0m
(10ft)
6.1m
(20ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
9.1m
(30ft)
(For mounting height of 2.4m (8ft))
SIDE VIEW:
0
8ft
(2.4m)
10ft
(3.0m)
12ft
(3.7m)
12.2m
(40ft)
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
0
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
12.2m
(40ft)
Figure 3. CM 0.77 GI V2 Lens Specification: Floor Coverage, Side View
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
10
CM 0.77 GI V3 Lens Specification
The CM 0.77 GI V3 lens array is intended for ceiling-mounted applications and is optimized for use with both dual and quad element pyroelectric sensors. The detector mounting flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element. The angle
from the center line to the placement notch is 15 degrees.
FRONT VIEW :
CEILING MOUNT ARRAY
Detector Position
CM 0.77 GI V3
11.7mm
(0.46in) 19.6mm
(0.77in)
Grooved Side
Notch Radius 1.5mm (0.060in)
TOP VIEW:
4.6m
(15ft)
CL
52.5mm
(2.066in)
3.0m
(10ft)
7.8mm
(0.3in)
1.5m
(5ft)
CL
CL
0
1.5m
(5ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
4.6m
(15ft)
SIDE VIEW:
0
8ft
(2.4m)
3.7m
(12ft)
2.7m 2.1m 1.5m 0.9m
(9ft) (7ft) (5ft) (3ft)
0
0.9m 1.5m 2.1m 2.7m
(3ft) (5ft) (7ft) (9ft)
3.7m
(12ft)
Figure 4. The CM 0.77 GI V3 Lens Specification, #1 of 2
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
11
g
g
4.6m
(15ft)
CL
3.0m
(10ft)
1.5m
(5ft)
CL
0
1.5m
(5ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
4.6m
(15ft)
SIDE VIEW:
0
8ft
(2.4m)
10ft
(3.0m)
12ft
(3.7m)
6.1m
(20ft)
4.6m
(15ft)
fresnel technologies inc.
1995
3.0m
(10ft)
1.5m
(5ft)
0
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
6.1m
(20ft)
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
Figure 5. The CM 0.77 GI V3 Lens Specification, #2 of 2
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
12
CM 0.77 GI V5 Lens Specification
The CM 0.77 GI V5 lens array is intended for ceiling-mounted applications and is optimized for both dual and quad element pyroelectric detectors. The detector mounting
flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element.
FRONT VIEW :
CEILING MOUNT ARRAY
Detector Position
CM 0.77 GI V5
11.68mm
(0.46in) 19.56mm
(0.77in)
Grooved Side
TOP VIEW:
15°
Notch Radius 1.52mm (0.060in)
4.6m
(15ft)
CL
52.5mm
(2.066in)
3.0m
(10ft)
7.82mm
(0.308in)
1.5m
(5ft)
CL
CL
0
1.5m
(5ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
4.6m
(15ft)
SIDE VIEW:
0
8ft
3.7m
(12ft)
2.7m 2.1m 1.5m 0.9m
(9ft) (7ft) (5ft) (3ft)
fresnel technologies inc.
2008
0
0.9m 1.5m 2.1m 2.7m
(3ft) (5ft) (7ft) (9ft)
3.7m
(12ft)
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
Figure 6. The CM 0.77 GI V3 Lens Specification, #1 of 3
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
13
CEILING MOUNT ARRAY
CM 0.77 GI V5
FLOOR
COVERAGE:
12.2m
(40ft)
(For mounting height of 12.2m (30ft))
CL
(30ft)
9.1m
6.1m
(20ft)
(10ft)
3.0m
CL
0
3.0m
(10ft)
(20ft)
6.1m
9.1m
(30ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
(40ft)
12.2m
SIDE VIEW:
0
(20ft)
6.1m
9.1m
(30ft)
(40ft)
12.2m
12.2m
(40ft)
fresnel technologies inc.
2008
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
0
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
12.2m
(40ft)
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
Figure 7. The CM 0.77 GI V3 Lens Specification, #2 of 3
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
14
CEILING MOUNT ARRAY
CM 0.77 GI V5
FLOOR
COVERAGE:
12.2m
(40ft)
(For mounting height of 12.2m (30ft),
and when a 4 element is used )
CL
(30ft)
9.1m
6.1m
(20ft)
(10ft)
3.0m
CL
0
3.0m
(10ft)
(20ft)
6.1m
9.1m
(30ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
(40ft)
12.2m
SIDE VIEW:
0
(20ft)
6.1m
9.1m
(30ft)
(40ft)
12.2m
12.2m
9.1m
6.1m
3.0m
3.0m
6.1m
9.1m
12.2m
0
(40ft)
(30ft)
(20ft)
(10ft)
(10ft)
(20ft)
(30ft)
(40ft)
fresnel technologies inc.
101W. MORNINGSIDE DR. FORT WORTH, TX 76110, U. S. A. (817) 926-7474, FAX:(817) 926-7146
2008
Figure 8. The CM 0.77 GI V3 Lens Specification, #3 of 3
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
15
CWM 0.5 GI V1 Lens Specification
The CWM 0.5 GI V1 lens array is intended for both wall and ceiling-mounted applications
and is optimized for both dual and quad element pyroelectric detectors. The lens is
intended to clip directly into the circuit board over top of the pyroelectric sensor.
FRONT VIEW:
TOP VIEW:
1mm R
(0.04in)
9.1m
(30ft)
24mm
(0.94in)
2mm R
(0.08in)
24mm
(0.94in)
4.6m
(15ft)
5.2mm
(0.2in)
TOP VIEW:
180°
0m
14.2mm
(0.56in)
12mm
(0.47in)
CLIP DETAILS:
(Scale 10:1)
4.6m
(15ft)
2.5mm
(0.1in)
1.7mm
(0.065in)
9.1m
(30ft)
1.
(0. 5mm
06
in)
SIDE VIEW:
(0. 1mm
04
in)
mm )
3.2 125in
(0.
1.2m
(4ft)
0m
2.4m
(8ft)
4.3m
(14ft)
9.1m
(30ft)
Figure 9. The CM 0.5 GI V1 Lens Specification: Wall Mount
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
16
FRONT VIEW :
CEILING MOUNT ARRAY
5.2mm
(0.2in)
CWM 0.5 GI V1
14.2mm
(0.56in)
12mm
(0.47in)
TOP VIEW:
4.6m
(15ft)
1mm R
(0.04in)
CL
24mm
(0.94in)
3.0m
(10ft)
2mm R
(0.08in)
24mm
(0.94in)
1.5m
(5ft)
CL
0
CLIP DETAILS:
1.5m
(5ft)
(Scale 10:1)
2.5mm
(0.1in)
3.0m
(10ft)
1.7mm
(0.065in)
1.
(0. 5mm
06
in)
4.6m
(15ft)
(0. 1mm
04
in)
SIDE VIEW:
0
mm )
3.2 125in
(0.
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
8ft
3.7m
(12ft)
2.7m 2.1m 1.5m 0.9m
(9ft) (7ft) (5ft) (3ft)
0
0.9m 1.5m 2.1m 2.7m
(3ft) (5ft) (7ft) (9ft)
3.7m
(12ft)
fresnel technologies inc.
Figure 10.
2009 The CM 0.5 GI V1 Lens Specification: Ceiling Mount, #1 of 2
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
17
(
g
g
(
))
9.1m
(30ft)
CL
6.1m
(20ft)
3.0m
(10ft)
CL
0
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
SIDE VIEW:
0
(15ft)
4.6 m
(25ft)
7.6 m
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
0
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
fresnel technologies inc.
Figure 11.
2009 The CM 0.5 GI V1 Lens Specification: Ceiling Mount, #2 of 2
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
18
EWA 0.3 GI V2 Lens Specification
The EWA 0.3 GI V2 lens is intended for wall-mounted room occupancy and proximity sensing applications in which an extra-wide sensing angle is required. See Figure 12.
Sensitive
Element
1.0"
(25.4mm)
.30"
(7.6mm)
4.6 m
28.4mm
(1.12in)
22.4mm
(0.88in)
13.8mm 7.6mm
(0.54in) (0.3in)
0.07"
0.08"
0.09"
0.2"
TOP VIEW:
ACTUALSIZE
4.6 m
SIDE VIEW:
4.6m
Figure 12. The EWA 0.3 GI V2 Lens Specification, Dimensions
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
19
NCL-3B Lens Specification
The NCL-3B lens is intended for wall-mounted entrance and proximity-sensing applications.
Figure 13. The NCL-3B Lens Dimensions
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
20
Figure 14. The NCL-3B Lens Specification, X Axis
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
21
Figure 15. The NCL-3B Lens Specification, Y Axis
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
22
NCL-3R Lens Specification
The NCL-3R lens is intended for wall-mounted entrance and proximity-sensing applications. This lens features two orientations, Tab A and Tab B, that can be used with the pyroelectric sensor to provide different beam patterns. Figures 16 through 19.
ȭ
ȭ
7$% GLUHFWLRQ $
5
5
7$% GLUHFWLRQ %
ȭ
ȭ
7ROHUDQFH
Figure 16. The NCL-3R Lens Specification, Dimensions
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
23
),(/' 2) 9,(:
'8$/ 7P@
Figure 17. The NCL-3R Dual Element Lens Specification, Tab Direction A, X Axis
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
24
),(/' 2) 9,(:
'8$/ 7P@
Figure 18. The NCL-3R Dual Element Lens Specification, Tab Direction A, Y Axis
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
25
),(/' 2) 9,(:
(/(0(17 7PP@
/HQV DUHDȭ
7H[WXULQJ DUHD
$
$
ȭ
ȭ
࠙723 9,(:ࠚ
5
5
࠙6,'( 9,(:ࠚ
7$% GLUHFWLRQ $
㺽
ȭ
ȭ
ȭ
7$% GLUHFWLRQ %
࠙%$6( 9,(:ࠚ
࠙$$
ࠚ
$
$
5
7ROHUDQFH
Figure 28. The NCL-10S Lens Specification, Dimensions
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
35
),(/' 2) 9,(:
6,1*/( (/(0(17 7P@
Figure 29. The NCL-10S Dual Element Lens Specification, X/Y Axes
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
36
NCL-11 Lens Specification
The NCL-11 lens is intended for wall-mounted room occupancy and proximity sensing
applications with 32 detection zones. See Figures 30 and 31.
Figure 30. The NCL-11 Lens Specification, Dimensions
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
37
Figure 31. The NCL-11 Detection Area, X/Y Axes
PS028609-0213
ZMOTION Detection and Control Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
38
ZMOTION Intrusion Detection Lens Specifications
Figures 34 through 33 provide the zone patterns and mechanical dimensions for the ZMOTION Intrusion Detection family of products. Recommended placement of the pyroelectric
sensor is provided with the detector and lens inclined downward at an angle of 12 degrees.
If you wish to use a tilt angle other than 12 degrees while maintaining the specified zone
patterns, move the pyroelectric sensor up by 0.021" (0.53 mm) for each degree less than 12
degrees, or down by the same amount for each degree greater than 12 degrees.
The WA 1.2 GI 12 V4, LR 1.2 GI 12 V3 and VB 1.2 GI V1 lenses can be interchanged in
the same end product without modifications to the placement or angle of the lens.
These lenses may also be used in nonintrusion applications. For additional lenses that do
not require security/intrusion detection capabilities, refer to the ZMOTION Detection and
Control Lens Specifications section on page 6.
PS028609-0213
ZMOTION Intrusion Detection Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
39
LR 1.2 GI 12 V3 Lens Specification
The LR 1.2 GI 12 V3 lens array is optimized for dual-element pyroelectric sensors in
long-range corridor security applications. It is normally used with the grooved side facing
the pyroelectric detector, and curved at a 1.2 inch (30.5 mm) radius about the sensitive area
of the detector. The detector and the lens array should be inclined downward at an angle of
12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining the
specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53 mm) for each
degree less than 12 degrees, or down by the same amount for each degree greater than 12
degrees. The detector position should be 0.812" (20.6 mm) below the upper edge, and centered left-to-right.
FRONT VIEW:
20.6mm
(0.81in)
42.6mm
(1.675in)
61mm
(2.4in)
TOP VIEW:
77°
5m
(16ft)
21.5°
2.5m
(8ft)
14°
29°
6.5°
CL
0
2.5m
(8ft)
5.0m
(16ft)
SIDE VIEW:
2.1m
(6.8ft)
1m
(3ft)
2.2m
(7ft)
3m
(10ft)
10.7m
(35ft)
30.5m
(100ft)
18.3m
(60ft)
Figure 32. LR 1.2 GI 12 V3 Lens Specification
PS028609-0213
ZMOTION Intrusion Detection Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
40
VB 1.2 GI V1 Lens Specification
The VB 1.2 GI V1 lens array is optimized for dual-element pyroelectric sensors in vertical
barrier or curtain-type security applications. It is normally used with the grooved side facing the pyroelectric detector, and curved at a 1.2 inch (30.5 mm) radius about the sensitive
area of the detector. The detector and the lens array should be inclined downward at an
angle of 12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining
the specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53mm) for each
degree less than 12 degrees, or down by the same amount for each degree greater than 12
degrees. The detector position should be 0.812" (20.6 mm) below the upper edge, and centered left-to-right.
Figure 33. VB 1.2 GI V1 Lens Specification
PS028609-0213
ZMOTION Intrusion Detection Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
41
WA 1.2 GI 12 V4 Lens Specification
The WA 1.2 GI 12 V4 lens array is optimized for dual-element pyroelectric sensors in
large-area security applications. It is normally used with the grooved side facing the pyroelectric detector, and curved at a 1.2 inch (30.5 mm) radius about the sensitive area of the
detector. The detector and the lens array should be inclined downward at an angle of 12
degrees. If you wish to use a tilt angle other than 12 degrees while maintaining the specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53 mm) for each degree
less than 12 degrees, or down by the same amount for each degree greater than 12 degrees.
The detector position should be 0.812" (20.6 mm) below the upper edge, and centered leftto-right.
FRONT VIEW:
20.6mm
(0.81in)
42.6mm
(1.675in)
TOP VIEW:
61mm
(2.4in)
10m
(33ft)
5m
(16ft)
0
88.2°
5m
(16ft)
10m
(33ft)
SIDE VIEW:
2.1m
(6.8ft)
1.7m 3.7m
(6ft) (12ft)
7m
(23ft)
15.6m
(51ft)
18m
(60ft)
Figure 34. WA 1.2 GI 12 V4 Lens Specification
PS028609-0213
ZMOTION Intrusion Detection Lens Specifications
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
42
Related Documents
Additional information about the ZMOTION Families of Motion Detection MCUs can be
found in the following documents, which are available from the Zilog website at
www.zilog.com.
Document
Number
Description
PB0225
ZMOTION Detection and Control Family Product Brief
PS0285
ZMOTION Detection and Control Family Product Specification
PB0230
ZMOTION Intrusion Detection Product Brief
PS0288
ZMOTION Intrusion Detection Product Specification
PS0228
Z8 Encore! XP® F082A Series Product Specification
AN0307
ZMOTION Detection Module Application Walkthrough
AN0309
ZMOTION High Brightness White LED Lighting Application Note
WP0017
A New PIR Motion Detection Architecture White Paper
WP0018
ZMOTION Detection Lens and Pyro Sensor Configuration Guide
Other ZMOTION Family Products
PS028609-0213
PB0223
ZMOTION Detection Module Product Brief
PS0284
ZMOTION Detection Module Product Specification
Related Documents
ZMOTION™ Lens and Pyroelectric Sensor
Product Specification
43
Customer Support
To share comments, get your technical questions answered, or report issues you may be
experiencing with our products, please visit Zilog’s Technical Support page at
http://support.zilog.com.
To learn more about this product, find additional documentation, or to discover other facets about Zilog product offerings, please visit the Zilog Knowledge Base at http://
zilog.com/kb or consider participating in the Zilog Forum at http://zilog.com/forum.
This publication is subject to replacement by a later edition. To determine whether a later
edition exists, please visit the Zilog website at http://www.zilog.com.
PS028609-0213
Customer Support
工商网监
湘ICP备2023018690号
