2W10G

2W005G THRU 2W10G SINTERED GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes WOB FEATURES 0.389(9.86) 0.349(8.84) 0.03(0.81) 0.03(0.71) 1.00(25.40) * * * * * * * Glass Passivated Die Construction Diffused Junction Low Foward Voltage Drop, High Current Capability Surge Overload Rating to 60A Peak Ideal for Printed Circuit Boards Case to Terminal Isolation Voltage 2500V Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 1.10(27.90) 0.181(4.60) 0.158(4.00) 0.22(5.60) 0.18(4.60) 0.22(5.60) 0.22(5.60) MECHANICAL DATA Case : Molded Plastic Terminals : Plated leads solderable per MIL-STD-750, Method 2026 Polarity : As marked on Body Mounting Position : Any Weight : 1.3 grams (approx) *Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current @TA=25 C o o 2W 005G 01G 100 70 100 UNITS 06G 600 420 600 02G 200 140 200 04G 400 280 400 08G 800 560 800 10G 1000 700 1000 VRRM VRMS VDC I (AV) 50 35 50 Volts Volts Volts Amps 2.0 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 2.0 A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Typical thermal resistance junction to case Operating junction and storage temperature range @TA=25 C @TA=125 C o o IFSM 60 Amps VF 1.1 5.0 Volts IR 500 16 63 -65 to +150 uA CJ R pF K/W o JC TJ,TSTG C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to case mounted on PC board with 13 X 13mm (0.03mm thick) land areas. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES 2W005G THRU 2W10G FIG.1 - FORWARD CURRENT DERATING CURVE 2.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 60 50 40 30 20 10 0 0 25 50 75 100 o FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.5 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 1.0 0.5 Single phase half-sine-wave 60Hz resistive or in ductive load 0 125 150 AMBIENT TEMPERATURE, C 1 10 NUMBER OF CYCLES AT 60Hz 100 FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=100 C o 10.0 1.00 1.0 TJ=25 C o 0.10 TJ=25 C PULSE WIDTH=300uS o 0.10 0.01 0.2 0.6 1.0 1.4 0.01 0 40 80 120 160 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ = 25 C o 10 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation