GF30

GF30A THRU GF30M SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes D TENTE PA 0.150(3.80) 0.130(3.30) DO-214AA 0.083(2.12) 0.077(1.95) 0.187(4.75) 0.167(4.24) FEATURES * * * * * * GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Ideal for surface mount automotive applications Built-in strain relief Easy pick an place o High temperature soldering guaranteed: 260 C/10 seconds, at terminals * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 0.016(0.40) 0.006(0.15) 0.102(2.60) 0.079(2.00) 0.050(1.27) 0.030(0.76) 0.236(6.00) 0.197(5.00) MECHANICAL DATA Case : JEDEC DO-214AA molded plastic over passivated chip Terminals : Solder plated , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.004 ounes , 0.12 gram *Dimensions0 in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current TA=75 C Peak forward surge current 8.3ms single half sine-wave IFSM superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 3.0 A TA=25 C o TA=125 C o TA=150 C o o o GF30 A 50 35 50 B 100 70 100 D 200 140 200 G 400 280 400 J 600 420 600 K 800 560 800 M 1000 700 1000 UNITS Volts Volts Volts Amps VRRM VRMS VDC I (AV) 3.0 115 Amps VF 1.0 5 50 100 40 47 13 -65 to +175 o Volts Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) IR uA CJ R R JA JL pF C/W o Operating junction and storage temperature range TJ,TSTG C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pad areas REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES GF30A THRU GF30M FIG.1 - FORWARD CURRENT DERATING CURVE 3.5 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 o FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 120 PEAK FORWARD SURGE CURRENT, AMPERES 60Hz RESISTIVE OR INDUCTIVE LOAD 100 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 80 60 40 20 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100.0 IINSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PULSE WIDTH=300uS 1% DUTY CYCLE 10.0 10 1 1.0 TJ=125 C TJ=150 C o o 0.1 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, pF TJ = 25 C o 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation