GP30K

GP30A THRU GP30M SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes D TENTE PA DO-201AD FEATURES 1.0(25.4) MIN. 0.210(5.3) 0.190(4.8) DIA. * * * * * * 0.375(9.5) 0.285(7.2) GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 o 3.0 Amperes operation at TA=55 C with no thermal runaway Typical IR less than 0.1uA o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 1.0(25.4) MIN. 0.052(1.3) 0.048(1.2) DIA. MECHANICAL DATA Case : JEDEC DO-201AD molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.04 ounes , 1.12 grams *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=55 C Peak forward surge current 8.3ms single half sine-wave IFSM superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 3.0 A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range TA=25 C o TA=125 C o TA=150 C o o o GP30 A 50 35 50 B 100 70 100 D 200 140 200 G 400 280 400 J 600 420 600 K 800 560 800 M 1000 700 1000 UNITS Volts Volts Volts Amps VRRM VRMS VDC I (AV) 3.0 125 Amps VF 1.0 5 50 100 40 20 10 -65 to +175 Volts IR uA CJ R R JA JL pF o C/W o TJ,TSTG C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES GP30A THRU GP30M FIG.1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES 3.5 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 2.5 2.0 1.5 1.0 0.375" (9.5mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 125 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 75 50 25 0 0 25 50 75 100 125 o 0 150 175 0 10 NUMBER OF CYCLES AT 60 Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 IINSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE o FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10.0 10 1 1.0 TJ=125 C TJ=150 C o o 0.1 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 110 PERCENT OF RATED PEAK RSEVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, pF TJ = 25 C o 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation