MBCR10M

MBCR10D THRU MBCR10M MINIATURE SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere D TENTE PA 0.213(5.40) 0.205(5.20) 0.132(3.35) 0.128(3.25) 0.047(1.20) MBCR Mounting Pad Layout 0.165(4.20) 0.157(4.00) FEATURES * Internal Constructure with GPRC (Glass Passivated Rectifier Chip) inside * Lead free product * Leadless chip form , no lead damage * Solder Joint , No Wire bond & Lead Frame * Low profile package * For surface mounted applications * Built-in strain relief * Low power loss , High efficiency * High current capability * High surge capacity * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 0.039(1.00) 0.232(5.90) 0.224(5.70) 0.229(5.82) 0.040(1.0) 0.031(0.8) 0.063(1.60) ~ R0 .2 0.037(0.95) 0.033(0.85) ~ 0.051(1.30) 0.043(1.10) 0.055(1.40) 0.221(5.62) MECHANICAL DATA *Dimensions in inches and (millimeters) Case : Packed with FRP substrate and epoxy underfilled Terminals : Tin plated , solderable per MIL-STD-750, Method 2026 Polarity : Laser marking Weight : 0.07 gram SuperBridge with GPRC inside TM TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current @ TA=55 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) @ IF=0.4 A Maximum instantaneous forward voltage @ IF=1.0 A @TC=25 C @TC=150 C o o o o SYMBOLS VRRM VRMS VDC I (AV) MBCR10D 200 140 200 MBCR10G 400 280 400 MBCR10J 600 420 600 MBCR10K 800 560 800 MBCR10M 1000 700 1000 UNITS Volts Volts Volts Amps 1.0 IFSM 30 Amps VF 0.9 1.0 5 Volts Maximum DC reverse current at rated DC blocking voltage I2t rating for fusing ( t < 8.3ms ) IR I2t CJ R JA 200 3.74 25 110 -55 to +175 o uA 2 As pF C/W o Typical junction capacitance per element (NOTE 1) Typical thermal resistance, junction to ambient (NOTE 2) Operating junction and storage temperature range TJ,TSTG C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. (2) Thermal resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. 05/2004 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES MBCR10D THRU MBCR10M FIG.1 - FORWARD CURRENT DERATING CURVE 1.2 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 40 PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 1.0 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive load 30 20 10 0 0 25 50 75 100 125 o 0 150 175 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10.00 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 IINSTANTANEOUS FORWARD CURRENT, AMPERES 10.0 TJ=100 C o 1.00 1.0 0.10 0.10 TJ=25 C o 0.01 0.2 TJ=25 C PULSE WIDTH=300uS o 0.01 1.6 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ = 25 C o 10 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS 05/2004 Zowie Technology Corporation